What are the detailed steps for beginners to drive?

The basic operation steps of driving are as follows:

First, before driving, walk around the car and see if there are any special circumstances. After getting on the bus, adjust the seat position and the left and right rearview mirror angles according to the body comfort.

Second, fasten your seat belt after adjustment.

Third, step on the clutch brake and hit the left turn signal.

Fourth, slow down and start, observe that there are no vehicles and pedestrians within a certain distance behind, and drive into the driveway.

Extended information:

Start taboo

1) A bogey started unsteadily. Starting is the first step of vehicle running. When starting normally, it is required to start smoothly and safely, with correct driving posture, not to look down at machine parts, but to look ahead and on both sides of the road. There must be no overshoot, jitter, flameout and intermittent arching when starting.

2) Second, avoid choosing inappropriate gears when starting. The choice of car gear should be based on the specific situation of car, road and slope. Generally, on a flat and solid road or site, you should choose 1 or 2 to start; If you are in cold climate, soft soil or uphill road, you must use a gear to start; On the snowy and muddy road, you must start from the first gear. At the same time, clear the snow and soil under the wheels or sprinkle sand under the wheels.

3) Three bogeys: The clutch pedal, accelerator pedal and brake pedal are not properly matched when starting. This cooperation must be skilled.

4) Four bogeys: Put your left foot on the clutch pedal after starting or forget to release the parking brake lever when starting. These are often mistakes that beginners easily make.

5) Five bogeys. Start without seeing the surrounding situation clearly. Make sure there are no people or other obstacles around the vehicle, and there are no cars coming from front, back, left and right, and then press the horn to start.

6) Six bogeys: the car is faulty in starting or the engine oil and coolant are insufficient, and the license plate is not fully on the road. Parking: Release the accelerator, step on the brake slowly, put the gear lever in neutral, and pay attention to braking in advance. For example, when you see the red light ahead, you should prepare for parking in advance and try to reduce the sudden braking.