How to bend a motorcycle

Bending refers to turning by tilting the car body.

Here are some bending techniques:

1, don't do unnecessary acceleration before entering the corner, otherwise your body will be in an unstable state and it will easily roll over.

2. Let Chinese medicine move in the corner at a constant speed. Never use clutches and brakes. You should use the throttle and inclination to adjust the speed and route in the corner, and keep your eyes on the front.

3. When you see the turning point, you should follow the acceleration, so as to avoid sudden acceleration causing the body to change the inclination angle and change the driving route.

4. The outward inclination of the car body will produce centrifugal force, so the car body and the car body must move the center to the inner side of the tire contact point appropriately to overcome the centrifugal force.

5. When driving in a turn, the wheel produces a kind of "tilting force", and when turning, the wheel is in a state of tilting to the road surface, which produces "axial force on the outside of the wheel", so the car body will also tilt.

Extended data:

Principle:

When we turn the handlebar to the right on a moving motorcycle (electric car), the car will immediately lean to the left and the car will turn to the left (and vice versa). You'll realize this next time you drive a motorcycle. The way is to drive straight, don't think about turning, but try to turn the handlebar to the right or left during straight driving.

You will find that the car is actually driving in the opposite direction to the steering wheel, and in order to adapt to this turning mode, our human body first makes an eversion, and then officially enters the turn. This seems to be a wrong way that the human body naturally realizes when driving.