Five Summaries of General Edition Students' Practical Training

From the content, training includes hands-on skills training and mental skills training; Including comprehensive quality requirements (entrepreneurial ability and employability are collectively referred to as cross-post ability) training. The following is a summary of the general trainee training I brought to you, hoping to help you!

General edition student training summary 1

Through this training, under the careful teaching of Mr. Hong, I dare not say that I have mastered the use of drawing commands and editing commands commonly used in Auto CAD, but it has been greatly improved compared with before training. Obviously, the speed is fast, the same type of drawings can be completed in less time, and the quality is only high or not. But the most skilled is the basic settings, such as layer, line type, line width, proportion, color, text style, dimension and so on. In order to strengthen this practice, I draw a picture frame for each picture and set the layer, line type, line width, color, text style and label style once. There are various labeling styles of geometric figures, especially some diameter and radius labeling have learned how to set them, which is different from the conventional labeling and has never been touched before in practice.

After two weeks of drawing training, I learned that CAD is a widely used technical application software, especially in machinery, construction and other industries. Compared with manual drawing, computer-aided drawing has many outstanding advantages, and it is far superior to manual drawing in accuracy, accuracy and aesthetics. What we are learning now is mechanical knowledge. After entering the society in the future, most students are engaged in the machinery industry. So mechanical drawing is our most basic course. Learning this skill well is of great practical significance to our future work. Of course, if it is only hand-painted, it may have an impact on the construction. In contrast, CAD computer drawing is very accurate and convenient.

Through this training, I also found that I still have many shortcomings, such as the line type, line width and color size are sometimes confused, the setting of text style and label style is not very skilled, and the line type selection of the border is incorrect. I corrected all the above mistakes under the correct guidance of Mr. Hong. But I'm still not familiar with mechanical drawing. Therefore, I will continue to learn drawing skills in the future and strive for greater progress in this respect. This training not only made me master the application of Auto CAD, but also made me wake up. Although some problems need to be thought by myself, the ability of self-thinking is indispensable, and I can solve problems independently, but the guidance of teachers is also indispensable. Don't be too paranoid when you encounter problems that can't be solved. At the critical moment, I want to carry forward the style of asking questions without shame. These two points are what I learned in the training of CAD, which is also a great gain for me. Finally, thank you for your hard teaching. You have worked hard!

Summary of general student training II

I have gained a lot through this training. The following is a summary of my training.

In addition to learning a lot of new knowledge, I also exercised my ability to do projects and improved my ability to think independently and operate by myself. The project tasks in practical training also make me more team spirit.

First, keep learning and enrich yourself.

In practice, I learned a lot of new knowledge, got to know HTML5, got a new understanding of internet plus, and made a choice for my future work.

Second, practice hard and constantly improve yourself.

Only by putting theory into practice can the value of theory itself be realized, and only by putting theory into practice can theory be tested. Similarly, a person's value is realized through practical activities, and only through practice can he exercise his own quality and show his will. This time, four projects were completed under the training of teachers, and my friends and I independently completed a small project. I am full of excitement and will work harder in the future.

Third, improve the summary and constantly pursue self-study.

Training, in front of you, is the fertile ground for you to gallop, cultivate your dreams and achieve the future. I will continue to study, practice in depth, constantly improve myself, reflect more, sum up more, learn from experience, and lay a foundation for the future.

It can be said that this training not only made me learn knowledge and enrich my experience; This will help me better adapt to my future work. Finally, thanks to the college for organizing this very meaningful training, which made us learn a lot and understand a lot.

Summary of General Student Training III

This internship, in addition to giving me a necessary understanding of the basic business of commercial enterprises and being able to carry out basic operations, I feel that I have gained a lot in other aspects. As I have been living in a simple university, this internship has undoubtedly become a platform for me to step into society and laid the foundation for my future step into society.

First of all, I think a big difference between schools and units is that they must have a strong sense of responsibility after entering the society. At work, we must have a strong sense of responsibility, be responsible for our own posts and our own business. If the work that should be completed that day is not completed, the clerk must work overtime; If you accidentally make a mistake, you must also be responsible for correcting it.

Secondly, I think everyone must stick to their professional ethics and strive to improve their professional quality after work. As the saying goes, to do a job, you must understand the rules of a job. I have a deep understanding of this from my colleagues in the internship unit. For example, some affairs need proof of work, although the other party may be self-aware, they will also ask the other party to show proof, and when the other party has something to say, they always patiently explain why they want to do so. At present, commercial enterprises have been brought into standardized management, so the work attitude of employees is particularly important, which is my personal experience.

Finally, I think in practical work, education is not the most important, mainly depends on personal business ability and communication ability. Anyone can do any work for a long time, and practical ability is more important.

So I realized that if we combine what we learned in college with more practice, and test the truth with practice, so that an undergraduate can have a strong ability to deal with basic practice and more systematic professional knowledge, this is the real purpose of our internship.

I am very grateful to the internship unit for giving me such a good internship opportunity, which made me learn a lot, grow a lot and gain a lot.

Summary of General Student Training 4

Electronic technology practice is a highly technical basic course, and it is also an important practical link for the department of science and engineering in our college to carry out engineering training, learn technical knowledge and improve comprehensive quality. From the second week to the fifth week, I will do this kind of internship for four hours every Tuesday at noon.

The internship task is to make a multimeter. I didn't know what to do in the electronic technology internship at first. I thought it would be like the previous metalworking internship. Later, I learned that I made the multimeter myself, and I can take the work back. It sounds really funny, so it should be fun to do! In this way, I started this internship trip with great interest and fun.

On the first day of practice, that is, the second week, I watched the scope and technology of electronic technology practice in the video, as well as the skills of the teacher's climax in the video, and I was envious. At this noon, I have a preliminary understanding of electronic technology practice, a necessary understanding of circuit boards and circuit components, and necessary guidance for my actual operation in the next three weeks.

In the third week, I didn't learn how to make it, but I did some basic work exercises and practiced how to weld resistors and wires with an electric soldering iron. The soldering iron is strange to me, so I take the opportunity of this practice very seriously.

Let me talk about the welding process again. First, insert the prepared components into the designated position on the printed circuit board. After heating with an electric soldering iron, use some proper amount of solder on the cutting edge of the welding head, and the amount of solder depends on the size of the solder joint.

When welding, the cutting edge of the welding head should contact with the solder joint and the component lead, and make necessary movement according to the shape of the solder joint, so that the flowing solder can cover the solder joint and penetrate into the gap of the welded object for about 3-5 seconds, and then remove the electric soldering iron. The time, direction and speed of removing the soldering iron determine the quality and appearance of welding. The correct way is to withdraw the soldering iron quickly when leaving the solder joint, and then leave the solder joint quickly, so that the solder joint is bright, smooth and burr-free.

When welding, the welding time should not be too long to avoid scalding components, but it should not be too short to cause false welding or virtual welding. After welding, clamp the welded parts with tweezers and pull them out properly to check whether the parts are welded firmly. If it is found to be loose, it must be welded again.

Welding looks very simple, but there are many skills that need to be paid attention to, such as the strength of clamping wire with side pliers, the amount and time of solder wire in the welding process, neither more nor less! I think the most difficult thing is soldering. I always can't grasp the quantity of solder wire and the time of soldering iron. I think this is a good practice, or I don't understand how many originals I have to weld.

In the fourth and fifth weeks, we started the welding of our last multimeter. I was a little excited to think that the multimeter usually used in the physics laboratory could be welded by myself at this moment.

In the first week of school, we ushered in the first class of the new semester-electronic technology training class. I have a feeling that I can't wait for new courses and new knowledge in the new semester.

This semester, our first contact is a preliminary understanding of electronic components, as well as the structure and layout of the circuit. The most important thing in this training course is the welding seen in daily life. In class, the teacher instructs us to use electric welding, because heating electric welding is more dangerous in the welding process, and improper use will cause harm to ourselves or others. Therefore, we must use electric welding in strict accordance with the relevant regulations and use it correctly to avoid scalding accidents.

When we have mastered the welding methods and skills of electronic components, we can begin to try to weld some circuit board components. The layout of electronic components is very important. Because this is related to the convenience and simplicity of circuit connection.

A short week has passed. In this week, without the guidance of the teacher, our training will be a great failure and the training course can't be completed. Secondly, in this training, I understand that cooperation and communication with peers are very important. Team spirit should be kept in mind. Isn't it a perfect thing to share the joy of success with the same sex?

The training course has gradually come to an end. Through this period of time, we have gained a lot of valuable knowledge, which is inseparable from the hard work of teachers. Here, all my classmates and I say thank you to the teacher! Teacher, you have worked hard!

Summary of General Student Training 5

On March 7th, 20th, he joined the training company and participated in software development training. In this training, besides letting me know the skills, qualities and knowledge I need in my work, it is more important to learn how to complete a task and enjoy my work. When you encounter problems, calm down, try to remove obstacles bit by bit, and finally succeed. A kind of self-confidence naturally arises, which should be the fun of work. Sometimes you need to ask others if you don't understand. Ask for advice modestly. I can really learn from others what I don't have. Every setback will bring me closer to success. I also learned to cooperate and communicate with others at work, share happiness and fatigue, and cooperate and help each other. This is a team spirit and something that must be learned.

After studying in school before, I have a necessary understanding and understanding of programming. I have been studying theoretical knowledge at school and have no chance to participate in project development. So to be honest, before training, software project development is abstract to me, and how to divide the work of a complete project and the steps to complete it are not very clear. After this training, I understand that the development of a complete project must be divided into teams, and each stage must be summarized and demonstrated.

The development stage of a complete project includes: long-term scope planning and use case description, project structure and risk assessment, business function specification, detailed design specification, code implementation, testing and installation package, etc. The development of a project requires a lot of financial and human resources. If there is no good long-term planning, it will have a great impact on the future development progress, and even at this moment, the project cannot be completed within the scheduled time or the completed project is different from the original expectation. A good project architecture, business functions and detailed design instructions have a clear guiding role in the development of a project, which can make developers have a clear understanding of the functions to be realized in the project as a whole, and can also reduce unnecessary troubles in the development process. The realization of code is the key to the success of a project development, that is to say, the preliminary work is the preparation of code realization.

I deeply realize that being an excellent software developer is not an easy task. I need not only enough enthusiasm and drive, but also a solid code foundation. I must have the ability to prepare reliability reports, functional specifications, detailed design specifications and some risk assessments in advance.

Besides the library, the training room is the place that makes me feel like a university the most. During these two months, I went back and forth between the training room and the dormitory, which made me enjoy a full study period, and also made me feel the charm of the university, full of confidence in myself and the university, and meet the challenges of tomorrow with an enterprising attitude.

It requires a solid theoretical knowledge in practice in order to operate smoothly. At this moment, I understood what "hate less when using books". This stimulates the desire to learn.

"Applying what you have learned" means applying what you have learned to practical operation and testing the correctness of knowledge with practice. I think this is the most fundamental purpose of training.

"I think it's an armchair strategist. I don't know if it should be done!" In the short training process, I deeply felt the lack of professional knowledge in practical application. I used to think that self-study was not bad, but once it was applied to practice, it was quite different. Only then did I really understand the meaning of "endless learning".

After two months of practical training in the development of e-government service platform system, I have a deeper understanding of Visual2005 software development platform and greatly improved my understanding and use of Microsoft basic class library. And how to use SQLServer database for connection operation has been substantially improved.

The short training ended, which laid a good foundation for my future employment and improved my software development level. In the future, I will study harder, constantly improve my own quality, blaze new trails, keep pace with the times and become an excellent software development engineer.

General edition student training summary 5 related articles:

★ General template for college students' internship summary report

★ Ten Practical Summaries General Edition

★ General template for student training summary

★ Personally summarize the last five articles in training.

★ Summarize 5 internship reports of senior students.

★ Summary of global college students' internship: 5 articles

★ Five General Edition of College Students' Internship Summary

★ Summary of Global Intern Work in 2022

★ 5 templates for interns' work summary.

★ General version of practical experience