How big is the doorway? Key design points of door opening size

There must be doors in the building, both indoor and outdoor doors have sizes. First of all, there must be a doorway, and the size of the doorway can only be selected after it is designed, so the size of the doorway is very important, especially the size of the doorway. How big is the doorway? What are the precautions for the size design of the door opening? Let's introduce it to everyone.

First of all, what is the size of the doorway?

1. The thickness of the door wall should not be less than 80_. Short doorframes and 80mm doorframes are not strong enough to support the door. If it is less than 80 mm, the thickness of the wall needs to be thickened to more than 80 mm. When there is a protruding beam above the door opening, the door cover line cannot be installed. It is also necessary to make a fake wall with a height of 50-60 mm, the length of which is the same as the width of the doorway and the depth of which is the same as the thickness of the doorway.

2. Actually measure the width and height of the doorway. It is necessary to measure whether the upper, middle and lower parts of the doorway are consistent. If not, the narrow part shall prevail, but the error shall not exceed 20_. If the error exceeds 20 mm, the hole in the wall should be corrected, which can be corrected with cement mortar or lime.

3. The size of bathroom door needs to be selected according to the measured bathroom doorway. The upper, middle and lower parts of the doorway should be measured to see if they are consistent. If they are inconsistent, the narrow part shall prevail, but the error shall not exceed 20mm. If the error exceeds 20 mm, the hole in the wall should be corrected, and cement mortar or lime can be used to correct it.

Second, the key points of gate hole size design

1. The size of the gate feng shui is very important. Feng Shui pays attention to balance and harmony, and the size of the gate must be proportional to the area of the house. If the house area is small, but the door is wide open, it is equivalent to a big gap in the house. Of course, it is difficult to gather wealth with a big gap; And if the house area is large, but the door is small, this situation will make it impossible to bring wealth into the home. Therefore, the door of a house should match the overall area of the house and should not be too big or too small.

The size of the gate needs to be coordinated with the proportion of the house. When the door of the house is small, the airflow will be blocked, strong air will not enter, and everything will go wrong; A small house with a big door will discourage you. If you are discouraged, you will spread your wealth. In home geomantic omen, the size of the residential gate is symbolic and can not be ignored. The door should not be too wide. The door is too wide to hide the wind and gather the gas. Not only can't you keep money, but people will be scattered and your body will become weaker and weaker. The door is too wide, and the old people at home will feel hard. The door should not be too high. When the door is too high, you will get used to looking up when you go in and out. There are psychological hints of vanity and flattery. You are too arrogant to handle things. The lintel is too high, even higher than the ceiling, which will cause fewer and fewer family members.

Door is the most indispensable part of a family decoration design. To install the door, we must first design the size of the door opening. So what is the size of the doorway and what are the design points? After reading the introduction of the above small series, I think everyone understands this.