Responsibility book for target management of construction safety production

Responsibility Letter for Target Management of Construction Safety Production (6 general articles)

In life, more and more people will use responsibility letters, and signing responsibility letters can effectively enhance our consciousness and initiative. You have no idea when you draw up the responsibility book? The following is the responsibility book of construction safety production target management (6 in general) that I collected and sorted out, hoping to help everyone.

Responsibility Letter for Management by Objectives of Construction Safety Production 1

In order to implement the national laws and regulations on construction safety production, such as the Construction Law, the Law on Safety Production, the Regulations on the Management of Construction Safety Production and the Decision on Further Strengthening Safety Production in the State Council, the responsibility system objectives are effectively implemented with the policy of "safety first, prevention first and comprehensive management", with more powerful measures and a more pragmatic style. In order to achieve the company's safety production management objectives, the responsibility objectives are implemented layer by layer. At present, we have signed a 2XX annual responsibility letter for the management of production safety objectives with various project departments. The specific contents are as follows:

1. Management objectives

1. Put an end to general accidents and above production safety accidents. Put an end to major mechanical accidents, major fire accidents and acute poisoning accidents. The frequency of young injuries should be controlled within 3‰, and the annual accident rate of serious injuries and deaths due to work is zero.

2. Actively promote the project department to create provincial and municipal civilized demonstration sites. In accordance with the Regulations on the Management of Civilized Construction Sites and the Standard for Safety Inspection of Construction (JGJ59-211), the standardized management of safety and quality of construction and civilized construction will be promoted, and the compliance rate of civilized construction will reach 1%.

3. Civilized construction management objectives

Ensure the completion of more than one provincial-level safety and civilized demonstration site.

ii. measures and requirements

1. according to the regulations of the Ministry of construction, the project department should set up a leading organization for safety management. if the total construction area of the project exceeds 1, square meters, it must be equipped with 2-3 full-time safety officers, and if it exceeds 5, square meters, a safety management unit should be set up.

2. Each project intends to set up a leading group for production safety on the construction site and adhere to the ten-day inspection system. At the weekly meeting, safety production analysis and research must be carried out at the same time to solve the problems existing in the safety production work on the construction site, and all safety management work should be arranged and implemented in time.

3. define the responsibilities, implement the post safety production responsibility system, define the post responsibility system in which the project manager is the first person responsible for the safety production of this project, and decompose the post safety production responsibility layer by layer, so as to ensure clear responsibilities, effective measures and implementation to people.

4. Strictly implement the enterprise safety management rules and regulations, and ensure the investment of safety and civilized construction measures in accordance with the Measures for the Administration of Safety and Civilized Construction Measures for Construction and Installation Projects of the Ministry of Construction. Improve the investment in safety protection facilities and equipment, and strictly control unqualified safety protection articles and eliminated machines and equipment to enter the construction site.

5. To improve the overall safety management quality of the project management department, the project manager and full-time safety officer must undergo safety training and assessment, and only after passing the assessment can they take up their posts.

6. Carry out the activities of "caring for life and paying attention to safety" to create a civilized construction site, adhere to the principle of "people-oriented", improve workers' working conditions and living environment, eliminate environmental pollution, and raise the awareness of safety culture and civilized behavior of all employees.

7. Conscientiously implement the mandatory provisions and standards for safety production in engineering construction, organize a site self-inspection every ten days, implement the measures of "three determinations and one implementation" for the existing hidden dangers of accidents, strengthen the control of accidents such as scaffolding, formwork support, foundation pit enclosure, lifting machinery injury and falling from high altitude, and pay close attention to safety protection measures such as "three treasures, four ports" and construction electricity. In the event of an accident, we should adhere to the principle of "four don't let go". Seriously implement the safety accident reporting system.

8. In-depth safety compliance activities on the construction site should be carried out, and effective measures should be taken to ensure the full implementation of safety compliance objectives. We should take effective preventive measures against the existence. It shall be implemented in accordance with the standards of "Atlas of Implementation of Safety Protection and Civilized Construction on Construction Site" and "Atlas of Demonstration of Safety and Civilized Construction Standards in Fujian Province" compiled by the company.

9. Do a good job in safety education and training, so as to improve the employees' concept of safety in production, enhance their self-protection ability, abide by various safety operation procedures, and strictly implement the system that special operations personnel must hold relevant certificates.

1, should establish production safety emergency rescue plan, and regularly carry out safety accident emergency plan drills.

11. The company will conduct regular assessment on the implementation and implementation of the target management of production safety in each project, organize the assessment at the end of the year, and give a notice of commendation to the project department that has achieved the management target. Winning the title of provincial civilized construction demonstration site will give greater economic rewards. Those who fail to complete the project will be given to informed criticism, and an economic penalty of 1, ~ 1, yuan will be imposed according to the relevant regulations of the company. For poor management, resulting in casualties, it will be handled according to the provisions of Articles 62, 64 and 66 of the Regulations on the Administration of Work Safety in Construction Projects.

12. This responsibility book is the responsibility book of 2XX annual safety production target management, which serves as the basis for year-end organization evaluation.

this responsibility letter shall come into effect after being sealed by the company, signed by the enterprise legal person and signed by the project managers of various management departments.

seal of the company:

Project Department:

Responsibility letter for target management of construction safety in production on XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX

1. The work of safety in production should be linked with bonus distribution and striving for excellence, and the "safety in production, one-vote veto system" should be implemented.

2, each type of work, each team should formulate the corresponding safety operation procedures and practical safety measures, each do their own thing well, whoever has a problem will be investigated for responsibility, and will never tolerate it.

3. At work, especially those who work in special types of work, they must hold relevant certificates, and it is strictly forbidden to work after drinking. They should act in strict accordance with the operating procedures, wear labor protection appliances, and put an end to things that violate the operating procedures.

4. Strengthen the maintenance of construction machinery and vehicles, strengthen the management of electricity use, and do a good job in rain, flood prevention, fire prevention and theft prevention.

5. Take effective measures, resolutely implement the principle that whoever is in charge is responsible, and strengthen the safety knowledge education for temporary workers (labor cooperation personnel) so that they can establish self-protection and prevent others from being hurt.

6. Each construction team should strengthen the management of all safety work of the project, carry out the construction in strict accordance with the safety operation procedures, and strictly control the safety in production.

7. Do a good job in the food hygiene and safety of employees to ensure their health.

8. Conduct safety inspection regularly or irregularly, and make rectification in time when problems are found.

2. Improve safety precautions and measures

1. Adhere to the principle of "prevention first, combining prevention with control". The inventory materials such as cement and admixture of the construction unit shall be rainproof, waterproof, fireproof, moistureproof, explosion-proof and leakage-proof according to the physical and chemical properties of the materials.

2. The concrete mixing station must be equipped with perfect fire-fighting equipment, and the management of electricity consumption should be strengthened to prevent fire from happening and endangering personal and property safety.

3. For aerial workers, safety belts and necessary safety nets must be equipped, and the quality and endurance of safety belts and safety nets should be checked frequently.

4. Safety warning signs must be hung on important construction sections and construction sites. At intersections and overpasses, reflective warning signs or hanging indicator lights should be erected to remind drivers to speed limit and pay attention to safe operation.

5. For key parts such as landslide-prone sections, bridges and viaducts, the project manager department should assign special personnel to take charge of production safety, and strengthen the management of construction personnel to ensure no hidden dangers.

Third, strengthen the labor protection for workers

According to the specific conditions of construction, it is required that steel workers, riggers and concrete workers must be equipped with labor protection gloves and wear-resistant rubber shoes, and cement unloaders should be equipped with special work clothes and masks to strengthen the health protection of workers. For electricians, they are equipped with safety belts and high-voltage insulating shoes.

4. Actively carry out power consumption publicity activities, assign special personnel to regularly measure the insulation degree of safety equipment and lines, conduct net cleaning inspection, test and maintenance of electrical equipment, and strengthen the management of mobile and handheld electrical equipment. Switch and power switch cannot be set in the open air.

5. Strengthen the management of construction vehicles and other mechanical equipment

1. Organize drivers to hold regular safety meetings to learn and convey knowledge about traffic driving and management, and further enhance the sense of responsibility of drivers.

2. Strictly implement the rules and regulations of "Maintenance of road-building machinery, and it is forbidden to drive on sick vehicles".

3. Ensure that the construction vehicles on the site obey the dispatching and obey the traffic laws and regulations, and ensure the driving safety. It is strictly forbidden to drive without a license.

VI. Strictly monitor the use and management of explosives.

Use a legal blasting team. The relevant qualification certificates of the blasting team and personnel must be checked by the local police station, district and municipal public security departments before blasting operations can be carried out, and they can be registered and put on record. When the blasting team receives explosives, it must be approved by the General Office of the project department to open the letter, signed by the project manager and checked and sealed by the police station. Where the amount of explosives is more than 1 kilograms, it must be reported to the Public Security Division of the Regional Bureau and the local police station, and the above departments will send personnel to inspect the blasting procedures on the spot to supervise the evacuation of passing people and vehicles; All the unused explosives must be sent to the local police station's explosives management station before 6: p.m. that day for storage, and then extracted when used the next day.

VII. Strengthening on-site management

It is necessary to ensure that no other safety accidents occur in the area of responsibility.

VIII. The project department must complete the following safety production indicators:

1. Extraordinary accidents (greater than or equal to 5%):

2. Major fire accidents:

3. Major accidents of boilers and pressure vessels:

4. Major accidents of power consumption:

5. Major theft accidents:

. Fatal accident in the responsible section:

8. Mortality rate of industrial accidents in construction site, mixing station and prefabrication yard:

9. Serious injury rate of industrial accidents in construction site, mixing station and prefabrication yard: .24%.

1. The crime rate of employees (above public security detention) shall not exceed .1% of the total number of employees.

11. Incidence rate of criminal cases: .5%.

12. The rate of holding certificates for special jobs: 1%.

13. Equipment rate of safety labor protection articles: 1%.

14. The success rate of handling internal contradictions and disputes in the project department is 1%, so as to prevent the occurrence of collective petitions and mass disturbances in cases of transferring people to criminal punishment.

15, safety education, inspection times, more than once a month.

at the end of the year, if one of the above indicators is not completed through inspection and assessment, it will be the construction team that fails to meet the requirements of safety production this year, and the construction team responsible for the accident will be punished in accordance with relevant regulations, and the advanced qualification will be cancelled.

XXXX construction group co., ltd.

2XXx xx x day construction safety production target management responsibility book 3

In order to implement the safety responsibility system and fully realize the safety work target of the project management department, we have signed the following safety production target responsibility book with the technical assistant manager of the project management department:

1. Objectives:

Put an end to major casualty accidents, equipment accidents and fire accidents; The rectification rate of major hidden dangers is 1%, and the rectification rate of general hidden dangers is over 98%; The three-level safety education rate of workers entering the site is 1%; The certificate-holding rate of special operations personnel is 1%.

2. Responsibilities and requirements:

1. Be responsible for all technical problems during the construction and production of the project. Take technical responsibility for safety leadership.

2, responsible for organizing the preparation of construction organization design (or construction scheme) and construction safety organization design. According to the characteristics of engineering construction, make written disclosure and acceptance of partial safety technology to relevant personnel. Both parties shall perform the signing formalities.

3, responsible for handling technical problems related to safety in production. Participate in safety inspection and analysis meeting of industrial accidents, and provide technical appraisal opinions and corrective measures.

4. Be responsible for the safety technology education of employees. Be responsible for the technical innovation of traditional safety protection technology, overcome technical difficulties and improve working conditions.

5. Establish safety technical files. All safety technology information in the industry must be complete and accurate, and the content should be comprehensive and true.

6, strictly implement the rules and regulations of production safety; Command and stop illegal and risky operations.

7. Be responsible for the environmental safety of the construction site and the completeness, completeness and effectiveness of all safety protection facilities, and whether they meet the safety technical requirements. Participate in the acceptance of safety protection facilities, large-scale mechanical equipment, temporary electrical equipment, outriggers (including lifting, hoisting, hanging and climbing), derricks, safety nets, hanging baskets and other projects in construction and production.

8. Any industrial accident or major near miss accident shall be reported immediately, and the site shall be protected to participate in accident investigation and handling.

iii. assessment method:

the branch will assess the objectives and responsibility system of construction managers quarterly according to the Assessment Form of Target Responsibility System for Construction Managers and the Assessment Form of Responsibility System, and give praise and reward or give criticism and economic punishment to the assessment according to the relevant regulations of the company.

iv. other requirements:

this responsibility letter comes into effect in triplicate, one for the branch, one for the project department and one for the deputy project technical manager.

responsible person:

responsibility letter for management by objectives of construction safety in production on XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX, XX According to the Building Law of the People's Republic of China, the Law on Safety in Production, the Regulations on Safety Management of Construction Projects and other relevant systems, the responsibility book for safety in production in construction is formulated.

1. The legal person of the general construction contractor shall be fully responsible for the safety production of the project under construction according to law, and is the first person responsible for safety production. Construction shall be carried out in strict accordance with national standards to ensure project quality and safety in production.

2, should establish and improve the responsibility system for production safety and safety education and training system, formulate rules and regulations for production safety and operating procedures, to ensure safety.