What is the lane sign for bus lines?

The bus lane sign is blue with a white bus pattern in it.

this sign indicates that the lane is reserved for buses traveling on this line. Sign setting: This sign is set at the starting point of entering the lane and before the entrance of each intersection.

The following is an introduction to the rules of using signs for bus lanes:

Speed: the maximum speed of vehicles is not allowed to exceed 6 kilometers per hour.

vehicle distance: the vehicle speed is 6km/h, and the vehicle distance is not less than 1m.

lane: it is strictly forbidden to overtake the normal bus ahead.

lighting: based on the turn-on and turn-off of street lamps, turn on and turn off the width lamps and low beam lamps in advance and extension, and turn on the high beam lamps when necessary (5:3 am to 18:3 pm). ?

parallel operation: the turn signal must be turned on 3 meters in advance for each parallel operation, and the parallel operation should be carried out in turn, and continuous parallel operation is strictly prohibited. Flight attendants must use indicating tools to signal social vehicles to yield, and assist drivers to take care of the safety of vehicles and passengers. In addition, if there are obstacles in the bus lane, you are only allowed to borrow the adjacent lanes to overtake the obstacles, and then drive back to the bus lane quickly after overtaking the obstacles.

for the above information, please refer to Baidu encyclopedia-bus lane.