How to operate Taiji Shanquan?

This operation is divided into eight steps:

1. Before the experiment, check whether the moving parts of the punch are filled with lubricating oil. Then start the punch to check whether the clutch and brake are normal.

2. Turn off the power supply first, and then start to install and adjust the die after the moving parts of the punch stop running.

3. After installation and adjustment, move the flywheel by hand and try to punch it twice. Only after the teacher checks can you start punching in.

4. Before starting the punch, others should leave the work area of the punch and take away the sundries on the workbench before starting the power supply.

5. After the punch is started, one person should carry out feeding and stamping operations. Others are not allowed to press the electric key or step on the switch board, or put their hands into the working area of the press or touch the moving parts of the press with their hands.

6, found that the punch has abnormal sound and mechanism failure, should immediately turn off the power switch for inspection.

7, to concentrate on the operation, it is forbidden to talk while doing, to cooperate with each other, to ensure safe operation.

8. Take good care of stamping equipment, molds, tools, measuring tools and instruments. After the experiment, the mold and punch should be cleaned and arranged.