How to post the wall stickers yourself?

How to post the wall stickers yourself?

In modern life, people's living standards are getting higher and higher, and most rural residents have moved to cities. At the same time, people will repair their home decoration well, but also pay attention to some matters. Let's share how to stick a wall sticker.

How to paste 1 wallpaper with self-adhesive wall?

Step 1: Prepare the paste

Sharp tools make good work. Tools to be prepared before pasting wallpaper are: glue, roller, knife, scraper, tape measure, glue container, basement membrane, etc.

Step 2: adjust the basement membrane.

Pour the basement membrane into a bucket, add the same bottle of basement membrane water (a little more water can be added appropriately), then stir it evenly and brush it directly on the wall;

Step 3: Take protective measures before brushing the basement membrane.

Before brushing the basement membrane, you can put cardboard under the wall. Because wallpaper is usually pasted after the decoration, the floor should have been laid by this time. The purpose of lining cardboard is to prevent the basement membrane from dripping on the floor and causing stains, especially on the wooden floor.

Step 4: Brush the basement membrane.

After taking protective measures, you can brush the basement membrane evenly on the wall. Friendly reminder: pay attention to the power supply when painting the wall, safety first! It is best to tape the power port!

Step 5: Mix the glue.

After brushing the basement membrane, adjust the glue. Add water to the special' glutinous rice glue' for wallpaper, because the glutinous rice glue used now is non-toxic and edible, which is harmless to human body. You can contact directly and stir by hand!

Step 6: Add transparent glue.

Add transparent wallpaper paste and stir evenly, and the glue of wallpaper paste is finished;

Step 7: Prepare the materials with a measuring ruler.

Measure the height and width of the wall and calculate how many rolls of wallpaper are needed. When calculating the number of rolls required, we should add 5 cm to the measured wall height. Why? Sell it first, then look down!

Step 8: Cut the wallpaper

Cut the wallpaper, cut out the first wallpaper with a utility knife, then unfold the second one and cut out the same size as the first one, and so on to calculate the required quantity, and remember the order according to the quantity;

Step 9: Brush the glue.

Brush the cut wallpaper evenly on the back with mixed glue in order, and pay attention to the corners must be brushed in place;

Step 10: Release.

Open the pasted wallpaper, paste the first one in order, and paste it from the corner. Pay attention to the above a little more;

Step 11: Scrape the wallpaper.

Scrape the wallpaper gently from top to bottom, from inside to outside, squeeze out bubbles and excess glue, and dry it with a wet cloth to make the wallpaper flat and close to the wall.

Step 12: panel cutting

The socket and switch panel should be cut in the middle, flattened with a scraper, and the redundant parts should be cut off.

Step 13: Trim and wash the flowers.

The collocation of patterns is very important for wallpaper, which directly affects the appearance, so at the beginning of cutting, it is necessary to reserve 5 cm more than the actual size, and at the same time, it is necessary to prevent measurement errors. Cut off the redundant wallpaper at both ends with sharp edges to avoid burrs. Then wipe off the glue left on the wallpaper surface with a towel dipped in water to avoid yellowing. If bubbles are found on the surface of the wallpaper after drying, cut it with a knife, inject glue and flatten it to eliminate it.

Step 14: Let's call it a day.

The perfect effect is gorgeous.

How to post the wall stickers yourself? 2 What should I pay attention to when pasting wallpaper in new house decoration?

A crack is bright white.

1 When using scraper and roller in joint construction, it is necessary to control it well. Don't scrape it too hard or the roller is stressed too much, which will cause the surface of wallpaper to wear, and the surface will shine and reflect light, resulting in cracks.

2. During the construction, the spilled glue should be wiped clean with cloth or sponge in time. If it is not cleaned in time, the glue will remain on the surface and glow under the light, leading to cracks.

3. Improper joint handling in the construction process will expand the flat-fell seam after the wallpaper absorbs glue, which will cause the wallpaper to stretch to both sides, exposing the wall surface and producing obvious joints. (The probability of rubber wallpaper and pure paper wallpaper is higher. )

The edges of the two seams are warped.

The wallpaper should be coated evenly and the glue blocking time should be sufficient. If the glue on the paper is uneven, there is too little glue on the edge of the wallpaper, and the adhesion will decrease, which will easily lead to the edge of the wallpaper tilting. In addition, after the wallpaper is pasted, it needs to be dried in the shade, and it is not allowed to open the window immediately for ventilation and drying, which will lead to the wallpaper drying too fast and easily lead to the edge of the seam.

Three-layer blackening

1. During construction, the spilled glue should be cleaned up with cloth or sponge in time. Glue exposed to the air for a long time is easy to oxidize, which leads to the darkening of the seam and changes the color of the wallpaper at the seam.

2. In the process of construction, cloth or sponge should be kept clean. If you wipe it with a dirty towel sponge, the color of the joints will be very dark when viewed from the side.

Four pieces of wallpaper are moldy.

Because the wall is wet, the wallpaper begins to be moldy from the original paper after a period of time, which reacts with the wallpaper, leading to discoloration and moldy wallpaper. Be sure to brush the basement membrane before pasting wallpaper. After the basement membrane is completely dry, you can paste the wallpaper. The basement membrane can play a waterproof and mildew-proof role.

Five wallpaper color difference

Strictly follow the label construction. If there are front and back labels, the construction must be carried out according to the front and back labels, which can avoid problems such as color difference and front and back.

How to stick self-adhesive wall stickers 3 The difference between paper, plastic and non-woven wallpaper.

persistence

First, the durability of paper wallpaper is relatively poor, about five to seven years;

Second, the service life of plastic wallpaper is long, about ten years;

Third, non-woven wallpaper is widely used, and its service life is about seven to ten years.

1, paper wallpaper

Paper wallpaper is the earliest kind of wallpaper, which is mainly made of natural materials such as grass and bark, so it has certain environmental protection. At present, the high-end paper wallpaper on the market is natural wood pulp wallpaper, which is made of natural wood pulp and has higher environmental protection, but its price is also higher than that of ordinary paper wallpaper.

Generally speaking, the cost of paper wallpaper is higher than latex paint, but its grade is lower, its durability is poor, and it will even fade after a long time. Although it has the advantages of convenient construction, easy replacement, rich colors and strong selectivity, it is gradually eliminated by the market.

2. Plastic wallpaper

Compared with other wallpapers, plastic wallpapers have a remarkable feature that they are easy to construct, can be pasted with ordinary glue, and are easy to replace. Mainly made of resin and other accessories, it has good heat resistance and ductility, good decorative effect, and is suitable for industrial mass production.

3, non-woven wallpaper

Non-woven wallpaper is the most popular wallpaper in the market at present, which is mainly divided into two types: one is made directly from non-woven substrate, and the fiber content in it is above 15%; Secondly, the nonwoven substrate is mixed with other raw materials for consistent production. If you add yarn, it's called yarn wallpaper. Non-woven wallpaper is not easy to shrink and rich in color, but it is difficult to construct, which requires the rich experience of the construction master.