What is going on with me?

Zigong Haixing Stone

Haha, your problem is that the memory is not plugged in properly. You have also seen the place where the memory stick is in contact with the motherboard. There are many golden fingers. How to deal with it? As follows

Find an eraser, wipe the gold finger clean, and clean off the impurities, oxides or dust on the gold finger on the memory. After cleaning, don’t rush to insert it back. The next step is Clean the memory slot of the motherboard. It is recommended to use a cotton swab to clean the memory slot. Remove the cotton on the head of the cotton swab and pull out some soft cotton. Put the cotton into the memory slot and drag it back and forth until the memory slot is cleared. dust inside. After the slots are cleaned, insert the cleaned memory back in. Generally, it will be OK. But be careful not to insert the memory module backwards

The purpose of cleaning is that the contact between the memory and the motherboard is often caused by too much dust, and small dust particles or oxides affect the contact. Therefore, perfect contact between the memory and the motherboard can be ensured after cleaning.

In addition, the poster mentioned a problem: Unknown hardware error is displayed. Is this a driver problem of which hardware? For example, the USB camera installed was caused by the driver not being installed when backing up the system before. The poster can read the prompts carefully before taking action.

2