Instructions for use of electric door remote controller

The remote controller of electric door is an important accessory of electric door, and improper use may affect the normal operation of electric door. This article will introduce the operating instructions of the electric door remote controller to help you use the electric door remote controller better.

Make sure the power is turned on.

Please make sure that the power supply is turned on before using the electric door remote control. If not, please turn on the power in time.

Check the electrode installation.

Check the electrode installation of the junction box at the rear end of the door row to ensure that the positive and negative poles are correct. If you find an installation error, please correct it immediately.

Check the remote control code

Check whether the remote control codes of the handle and receiver are consistent. If they are inconsistent, it may be necessary to unify the coding or seek the assistance of professional maintenance personnel to re-code.

checking circuit

Check whether there are problems such as virtual welding and missing welding in the circuit. Judgment method: Press the switch button in the energized state, listen to the sound of the functional circuit relay, and observe whether the indicator light is on. If there is no response, first check whether the door wire is connected normally, or whether there is the possibility of reverse connection. If you still can't solve it, please seek professional assistance.

Replace the battery

When the distance of the remote control becomes shorter, please replace the handle battery. The battery model is 23A 12V, which can be purchased in large shopping malls.

Maintenance receiving module

If the electric door remote controller can't receive the signal normally, it may be that the receiving module is out of order. If it cannot be solved by yourself, please seek professional to repair or replace the functional circuit.