How much does it cost to liberate the j6 high hurdle 6.8 meter refrigerated truck?

Reference price of Jiefang j6-meter-8 refrigerated truck: 22, ~ 28,.

jiefang J6L24 HP 6.8m refrigerated truck

chassis configuration

vehicle model: CA518XLCP62K1L2E5?

vehicle size: 9.2×2.6×4m

body size: 6.8×2.41×2.5m

body volume: 41m3?

engine: dachai (CA6DH1-24E5)

power/horsepower: 179kw/24hp

total weight: 18t; Car weight: 8.4 tons; Cargo pulling weight: 9.4 tons

Shaanxi tooth 8JS85E transmission, axle 1827 front axle, axle Ф378 cast bridge (self-adjusting arm, domestic ABS, 186 track, speed ratio of 4.333), 22 J6L semi-floating and high-top cab, electric glass lifting, electric rearview mirror, driver's seat with leather ventilation and heating seats (lumbar support, handrails), etc. 237×75×7, automatic air conditioner, front and lower protection device, 3L steel oil tank, wide bumper, electro-hydraulic lifting device, aluminum alloy air reservoir, suspension 7/7+6, VOSS joint, kettle seat, constant speed cruise, chassis bridge with 5/5/5, km long oil change interval, left side of the car body with the words "Green Pass for Pilot Edition" and right turn sound.

Precautions for the use of refrigerated trucks:

Goods must be stacked on double-sided pallets; Plastic film cannot be wrapped on the fresh-keeping pallet, which will block the circulation of circulating cold air to the goods; Do not block the floor under the goods.

Generally, the floor of refrigerated trucks is made of aluminum guide rails with ventilation; However, there are also some refrigerated trucks without aluminum guide rails, but with flat non-slip floors. Usually, as a third-party transport enterprise or an enterprise transport vehicle for dairy products, a flat non-slip floor is used, which is suitable for the transportation of various products or convenient for cleaning the ground. However, attention must be paid to loading with double-sided pallets to ensure the circulation of cold air on the ground. It is strictly forbidden to pile the goods directly on the flat floor.

don't pile goods in front of the evaporator outlet, otherwise it will hinder the cold air flow; Blockage above the cargo will cause short circuit of cold air flow. Keep a minimum distance of 225mm between the top of the cargo and the roof.