How to paste words on the glass door?

You can blow it with a hair dryer at a low temperature about 20 cm away from the sticker, then scrape the corner with a ruler and tear it off slowly by hand.

When you meet a tight part, strengthen it with a hair dryer, so as to soften the glue with a hair dryer and scrape it off gently with a ruler. And this method is not only suitable for paper stickers, but also effective for plastic stickers. First, wipe some washing powder on the glass door, choose a ruler to fix it, and then paste the text to be pasted. If you're afraid it won't look good. Look at other stores.

Extended data:

Methods to prevent the glue on the glass door from being difficult to remove;

1. Use electrostatic sticker: Just like the electrostatic screen saver used on our mobile phones, before pasting the sticker, buy an electrostatic sticker and paste it on the glass, and then paste it on the electrostatic sticker paper. So next time, just tear off the electrostatic sticker and throw it away.

2. Sucker sticker: Put the sticker into the sucker sticker. The method is similar to the electrostatic sticker, but the sucker sticker can be reused. When replacing the sticker, just replace it with a new one.

The surface of the glass glue to be bonded to the substrate must be clean and free of other attachments (such as dust). ), otherwise the glass glue will not stick firmly or fall off after curing.

Acidic glass glue will release irritating gas during curing, which will irritate eyes and respiratory tract. Therefore, the doors and windows must be opened after the construction, and the gas must be completely solidified before moving in.