How can China Unicom users activate Pink Diamond via SMS?

Click "Control Panel" in the "Start" button, open "Network Connections" in the "Control Panel" window, right-click "Local Area Connection", select the "Properties" option, and in the Properties dialog Double-click "Internet Protocol (TCP/IP)" in the box; click "Use the following IP address" and enter the IP address 192.168.1.X (X range 2-254), subnet mask 255.255.255.0, and default gateway 192.168 .1.1, just confirm. Line and IP verification: After the hardware is connected, turn on the power and check whether the router light signal is displayed and whether the router and computer can communicate normally. We can send data packets to the router's LAN port through the computer and check whether the data packets can be returned. The specific method is to ping the router's default IP address (can be found in the router's user manual) to see if the communication is normal. Click the "Start" button, select "Accessories" in the "Programs" menu, click "Command Prompt"; in the pop-up DOS window, enter "ping 192.168.1.1 -t" (be careful not to ignore the spaces), and return A message similar to the one shown below will appear in the rear window of the car, indicating that the router and computer can communicate normally. If similar information as shown in the picture does not appear after pressing Enter, and there is indeed no problem with the hardware connection, we need to check whether the problem is caused by improper network settings. Log in to the router: Open a web browser, enter the router's management address in the address bar, such as "Protocol (TCP/IP)", click "Obtain an IP address automatically", and click "OK";