Empty number setting

How to change the mobile phone back when it is set to an empty number?

When the phone is turned on.

Enter **2 1*999999# to make a call, and the mobile phone will be changed to call forwarding (empty number).

Then enter ##2 1# call in the boot state, and you can switch.

Explain in detail:

Here is a method to set the local mobile phone number to an empty number. That is, if someone calls your mobile phone, it will prompt "The number you dialed does not exist, please check it and dial again". This method only applies to China Mobile.

Method of setting mobile phone to empty number

Turn on the phone and enter **2 1*999999#.

Press the dial key, and "All incoming calls have been successfully transferred" will be displayed. Indicates that the setting was successful. At this time, if someone calls your mobile phone, it will prompt you for an empty number.

Cancel this setting, press ##2 1#, and then press the dial key, prompting "Call Transfer Cancelled", indicating that the cancellation is successful.

How to set the mobile phone to an empty number

When you don't want to be disturbed by others and are embarrassed to turn off your phone, it's a good idea to let others call your mobile phone to remind you of the empty number. Here is a way to make your mobile phone empty at any time. It's very simple ~ ~ friends in need can write it down ...

Enter **2 1*999999# in standby mode.

Press the dial button again ~ ok, you're done ~!

In this state, the phone number that others call you does not exist, and you will not receive the call.

Most mobile phones can do it at first.

Note: Because all models have not been tested, the success rate cannot be guaranteed.

I would like to remind you that this state will not be cancelled even if it is closed and reopened.

The code to cancel the blank state is ##2 1#. Input method as above.

Finally, I would like to remind you that the empty number will be cancelled after the game, so as not to delay the time.

This principle is probably realized by using the call forwarding function. If the call forwarding is not connected, there will be no charge, so this method will not waste your phone bill. ...

Tested and successfully implemented on my mobile phone.

How to set the mobile phone to an empty number!

Set the mobile phone to an empty number.

The method is to enter "**2 1*999999#" in standby mode and press the [dial] key. After someone calls you, you will hear the hint of an empty number. Of course, you can't know the phone information.

The solution is to enter "##2 1#" and press [Dial].

Principle explanation: I am sensitive because I have studied communication. After checking some information, it turns out that this is a call forwarding service, that is to say, the call is forwarded to the empty number of "99999", and China Mobile does not charge for unsuccessful call forwarding, so it is still very easy to use. Similarly, you can also transfer to the number that has stopped and get the stop prompt tone. Of course, if you are brave enough, you can try to transfer the other party's call to 1 10 (that is, "* * 21*/kloc-0 #"), 1 19, Qingdao Seventh People's Hospital and other toll-free numbers. You can also try "**2 1* Jiao #" or "**2 1* Cecilia Cheung #" to express your condolences or make a phone call for predestination/love.

(* The following table is from China Mobile)

Function setting, acquisition and elimination of query

Unconditional transfer **2 1* phone number # # 2 1 # * # 2 1 #

No signal transmission **62* Phone number # # 62 # * # 62 #

No answer transfer **6 1* phone number * 10* ringing time # # 6 1 # * # 6 1 #

When busy, transfer **67# phone number # # 67 # * # 67 #.

In addition, there is another way to remind you that you are out of service, which is very good and violent: unplug the battery directly when you turn on the phone.

How to set the status of downtime or empty number for smart phones?

First, use the call forwarding function. First, the call forwarding function is opened in the operator's business hall; Then "Settings → Call Settings → Call Forwarding → Voice Calling → Always Forwarding → Enter the number" and confirm.

If you want to prompt that it is closed, please enter a number that is currently closed. If you want to prompt that it is empty, please enter a number that does not exist or has been used. After using this function, all your incoming calls will not be answered normally, but you can make calls and send and receive short messages normally.

If you use a mobile phone number, you can also use the shortcut operation: start unconditional call forwarding mode: directly enter **2 1* mobile phone number # on the dial to cancel unconditional call forwarding mode: directly enter ##002# dial 2 on the dial. Use interception software, such as downloading and installing 360 mobile guards and 360 mobile guards, enter the harassment interception function and select Settings. Turn on the harassment interception function, select "Block All" in interception mode, and select "Call back to idle number" or "Call back to stopped" in "Call interception ring back tone", which will take effect after confirmation.

What number can be set as an empty number when dialing a mobile phone number?

The method of emptying the mobile phone at any time is as follows

In standby mode, enter **2 1*999999# and press the dial key OK, and you're done!

In this state, the phone number that others call you does not exist, and you will not receive the call.

Definitely not a call transfer. You can tell by a call transfer.

Initially, most mobile phones can try Nokia, dopod and Sony Ericsson.

(Note: Because all models have not been tested, the success rate cannot be guaranteed. )

I would like to remind you that this state will not be cancelled even if it is closed and reopened.

The code to cancel the blank state is

##2 1# Input method is the same as above ~