Detailed settings for Cisco routers Command instructions for Cisco routers

Access-enable Allows the router to create temporary access list entries in the dynamic access list

Access-group Apply the access control list (ACL) to the interface

Access-list Define a standard IP ACL

Access-template Manually replace the temporary access list entry on the connected router

Appn Send commands to the APPN subsystem

Atmsig Execute ATM signaling commands

B Manually boot the operating system

Bandwidth Set the bandwidth of the interface

Banner motd Specify the date information banner

Bfe: Set the emergency manual mode

Boot system: Specify the system image loaded when the router starts up

Calendar: Set the hardware calendar

Cd: Change the path

Cdp enable Allow the interface to run the CDP protocol

Clear Reset function

Clear counters Clear the interface counters

Clear interface Restart the software logic on the interface

Clockrate: Set the clock rate of the serial port hardware connection, such as the rate acceptable to the network interface module and interface processor

Cmt: Enable/disable the FDDI connection management function

Config- register: Modify configuration register settings

Configure Allows entering existing configuration mode, maintaining and saving configuration information on the central site

Configure memory Loading configuration information from NVRAM

Configure terminal Perform manual configuration from the terminal

Connect Open a terminal connection

Copy Copy configuration or image data

Copy flash tftp Back up the system image file to a TFTP server

Copy running-config startup-config Store the current configuration in RAM to NVRAM

Copy running-config tftp Store the current configuration in RAM to the network TFTP server

Copy tftp flash Download the new image from the TFTP server to Flash

Copy tftp running-config Download the configuration file from the TFTP server

Debug Use the debugging function

Debug dialer: Displays what number the interface is dialing and other information

Debug ip rip: Displays RIP routing update data

Debug ipx routing activity: Displays information about routing protocol (RIP) updates Packet information

Debug ipx sap Displays information about SAP (Service Advertisement Protocol) update packets

Debug isdn q921 Displays the data link layer that occurs on the router D channel ISDN interface (Layer 2) access process

Debug ppp Displays the business and exchange information that occurred during the implementation of PPP

Delete Delete files