What is the job of the oil field?

Question 1: What is the basic work of the oilfield? There are many points, and the most basic of the first line is the well transfer team, downhole service and hot injection team responsible for exploiting heavy oil!

Question 2: What are the jobs in the oil field? The position in the oil field must be divided according to the unit. According to the nature of work, the oilfield is divided into geophysical prospecting, geological survey, drilling, oil production and other units, and each unit contains different types of jobs and posts. For example, drilling includes mud workers, diesel engine engineers and so on (I am not familiar with drilling). If stamped with the seal of the oil production plant, you can fill in the internship in the oil production post, boiler post, water injection post, gathering and transportation post, laboratory post, geological post, engineering technician post, power generation post and electrician post. The post requirements are estimated to be similar, and I am familiar with the post operation process, safety rules and regulations, daily management and maintenance of equipment, data collection and sorting, emergency handling and so on.

I hope it helps you.

Question 3: What position is better for oilfield work? I'm from PetroChina. Let me talk about my opinion, hoping to help you.

At present, Shengli Oilfield is the largest company under PetroChina, and Changqing Oilfield is on the rise. There is no concept of being close to the city in PetroChina. Either in cities or in production bases of barren hills and wild forests.

To say that there is room for development, the most important thing is connections. If you have connections, it will develop rapidly. Without connections, it is not impossible, but it is very difficult and the probability is very small. You should know this.

On the issue of treatment, the front line gets more money, but it is bitter, tired and far from the city. The office has less money, but it's easy (the ordinary office is far from the city), depending on how you choose. It is best to enter the subsidiary headquarters. Take Changqing Oilfield as an example. Its headquarters is in Xi 'an. If you can get in, it is still very good, but it is more difficult.

Question 4: What can I do when I go to the oil field? Dig for oil and eat oil.

Question 5: What is the job of dry maintenance in oil fields? What is the main content of workover operation?

China petroleum news center

As we all know, there is a small fault in the car, which can be repaired by ordinary maintenance points and mechanics. This is called a minor repair. If something goes wrong, you have to go to a special repair shop for major surgical repair. This is called overhaul. So are oil and gas wells. General simple repair and maintenance work is called minor repair operation and maintenance operation. Its main contents include: sand washing pump inspection, wax removal pump inspection, simple object salvage, replacement of downhole pipe string or tool, cementing, pressure measurement, water plugging, water injection well testing, deployment and so on. The construction teams that undertake these tasks are called minor repair operation teams. The basic method of minor repairs is to pull out the original tools in the well by means of tubing, and then carry out the construction of the project according to the construction design. After the completion of the construction purpose, the updated tool or oil pump is lowered into the predetermined position in the well through the tubing to restart production. Sand washing and pump inspection is a typical minor repair operation.

The vast majority of oil fields in eastern China are continental sedimentary strata, and some oil layers have loose cementation. The fine sand particles in the oil layer flow into the wellbore with oil and gas, and the larger sand particles sink into the bottom of the well, which leads to sand burial in the oil layer over time. Another part of the sand enters the oil pump with the oil flow, which causes the sand to block the oil pump and the oil well does not produce oil. At this time, you have to go to the repair operation team to circulate the hydraulic well to prevent oil and gas from gushing out. Then pull out the sucker rod, tubing and oil pump in the well one by one and clean them on the ground. At the same time, run tubing above the sand surface in the wellbore and wash the sand in the wellbore by hydraulic sand washing method. Finally, according to the design requirements, run the new oil pump into the well with tubing, and then run the sucker rod to restart pumping production.

If there is a major fault in the oil and gas well, it must be repaired by a special overhaul operation team. Overhaul operation is characterized by great engineering difficulty and high technical requirements, which requires the use of large workover equipment, equipped with special equipment and tools such as overhaul drill pipe and overhaul turntable to carry out the work. The contents of maintenance operations can be summarized into the following three categories:

The first type, complex salvage, as the name implies, is very complicated and can't be done by general minor repair teams. The so-called complex salvage refers to the very complicated situation of falling objects in oil and gas wells due to various reasons. For example, a well stuck all downhole strings and tools, and the oil pipe was pulled off when the minor repair operation team handled it, so it could not be operated and had to be handed over to the major repair operation team for repair. Second, repairing oil well casing is a necessary condition to ensure the normal production of oil and gas wells, and casing damage often occurs in oil wells for various reasons, so repairing oil well casing is one of the main tasks of overhaul operation teams. Casing damage mainly includes the following situations: first, casing shrinkage, that is, the inner diameter of oil well casing becomes smaller, which makes downhole tools unable to pass through and oil wells unable to produce normally; The second is casing fracture, that is, the casing of oil well breaks into cracks or holes, which leads to a large amount of formation sand pouring into the well and makes the oil and gas well stop production; Third, the casing is dislocated and disjointed, some wells will be broken, and the upper and lower fractures will be staggered. The third type is casing drilling, that is, using a small drill pipe with a drill bit, running the casing of an old well, drilling a window at a predetermined position (the term is "windowing"), drilling a small hole from the window with a small drill bit, and then running the small casing for cementing. This project of drilling a small hole from the casing of the old well is called sidetracking of the old well, which is suitable for the following situations: the lower part of the old well is scrapped and cannot be mined, and production can be resumed after sidetracking; The oil layer in the old borehole is not good, but there is a good oil layer near the borehole, and new reserves can be exploited after sidetracking.

Question 6: What is the job of looking at wells in the field? The salary is quite high, and I am not tired when I listen. First of all, the welfare of the oil field is definitely good. And outdoors, there are many subsidies, but it is a little harder.

Question 7: What do girls usually do in oil fields? In the oil field, they generally do logistics and services. If you are ambitious or willing, you can also take part in oil field work.

Question 8: What is petrochemical industry? Petrochemical industry: learn the basic principles, production processes, typical equipment and basic process calculation and optimization methods of crude oil and petroleum products, and master the methods of developing and improving production processes and developing and applying new technologies to improve product quality. After graduation, students are suitable for research, development, production and management in the fields of petroleum processing, petrochemical industry and refining catalyst.

Main courses: chemical engineering principle, chemical thermodynamics, chemical reaction engineering, catalytic principle, chemical self-tapping and instrumentation, chemical engineering drawing, chemical machinery foundation, petrochemistry, petroleum processing engineering, professional foreign languages, petrochemical professional experiments, etc.

Question 9: What does oil exploration do? Changqing Petroleum Exploration Bureau, affiliated to China Petroleum and Natural Gas Group, is a comprehensive large state-owned enterprise providing engineering services, production services and social services to domestic and foreign customers in the fields of oil and gas exploration, development, processing and sales. It has advanced oil and gas exploration and development equipment and scientific research instruments and equipment at home and abroad, and has the capabilities of drilling and supporting services, underground operation, oil and gas field surface engineering design and construction, road and bridge construction, mechanical repair and so on, and can provide a series of engineering services from oil and gas field exploration and development to surface construction. In 2003, the main business was 565.438+0.67 billion yuan, and the total value of diversified production and operation was 265.438+0.50 billion yuan.

The total annual output value of processing and manufacturing industry is 289 million yuan, ranking first in western oil fields.

The annual monetary workload of construction is 654.38+0 billion yuan.

China Petroleum and Natural Gas Group ranked third.

Changqing Petroleum Exploration Bureau is headquartered in Xi, China, and its main work area is in Ordos Basin and its surrounding areas, spanning five provinces: Shaanxi, Gansu, Ningxia, Mongolia and Shaanxi. After more than 30 years' efforts, Changqing team has built a super-large oil and gas base with an oil and gas equivalent of over10 million tons in Ordos Basin, becoming another emerging energy center of China Petroleum after Songliao in Northeast China, Bohai Bay in Xinjiang and Junggar.

Changqing Petroleum Exploration Bureau has nearly 10,000 professional technicians, 7 well-equipped and technology-intensive research institutes, 1 national key laboratories and postdoctoral research stations. A set of proprietary technology for exploration and development of low permeability oil and gas fields has been formed. Over the years, * * * has won 2/kloc-0 national science and technology achievement awards, 96 provincial and ministerial science and technology achievement awards and 36 patents.

The construction team of Changqing Petroleum Exploration Bureau has also provided various engineering services to other domestic oil fields and units for many times, and at the same time actively explored the international market and visited Ecuador, Nigeria, Uzbekistan, Bangladesh, Indonesia, Sudan and other countries and regions to undertake engineering services, enjoying a high reputation.

Question 10: My family works in Daqing Oilfield Company, and I also want to go. For many years, as far as I know, the Information Center of the Planning and Research Institute of the Geological Brigade and the Engineering and Technical Brigade are both department-level units, and my mother is the director of the Technical Brigade. Their director is at the department level and their deputy director is at the metre level. They all have cars, and there are more than n departments below. The department secretary is a stock level, and other units are similar. The college students who are now assigned either have a background at home or have done a good job at the grassroots level and have been transferred. Almost all of them are engineers (intermediate) or above, and college students earn a lot, because there will be some projects, and the older ones can't do it because they don't have enough education.

Those who study petroleum engineering generally go back to the technical brigade, while those who study geology will go to the geological brigade. But with their years of experience, it is better to study geology in the engineering and technical brigade, because few people in such units know geology, and they are very popular and valued. Conversely, those who study petroleum and geology are better.

Generally, college students who have just graduated will be transferred to the four units you mentioned by virtue of their ability, education and English certificate after working in the grass-roots team for one year. I hope I can help you.

Hope to adopt