Wall hanging method of indoor wall brick

The installation of indoor wall tiles mainly includes the following methods: cleaning the wall, laying foundation, measuring lines, applying adhesive, applying glue evenly, installing tiles and caulking agent. Generally speaking, the method of installing tiles on the wall needs patience and care to ensure that every step is in place, so as to ensure that the tiles are installed on the wall firmly and beautifully.

Clean the wall

Before installing ceramic tiles, the wall must be cleaned to ensure that the surface of the wall is smooth, flat and free of dust or oil stains.

ground

Beat the foundation with cement mortar or decorative glue for walls and floors, and scrape the foundation with a scraper. Pay attention to the smooth surface of foundation without sanding or looseness to ensure the firmness of tile installation.

measuring line

According to the size of the wall and the size of the tiles to be installed, use a spirit level or a spirit level to measure the horizontal and vertical lines of the wall to ensure that the tiles are arranged neatly and evenly.

Brush coating agent

After the foundation is completed, you can choose to brush a layer of paint, which can make the tiles better attached to the wall and increase the sealing and waterproof effect.

Uniform gluing water

Use wall and floor tile glue to fix the tiles, and evenly spread the glue on the wall to ensure the paint area is sufficient and ensure the paste quality of the tiles.

Installing tiles

Stick the tiles on the wall piece by piece, arrange the tiles in order according to the measured lines, and use ear scraper or tile hammer to compact the tiles to ensure the uniform gap between each tile.

gap filler

After the glue is dry, fill the gap between each tile with caulking agent, and scrape the caulking agent with a glue scraper to make the surface of the gap consistent with the surface of the tile.