One-time and two-time protective clothing technology

Wear protective clothing, pay attention to avoid contact with the ground, and check the validity and integrity. Open the zipper, put on the lower body first, then put on the upper body, then put on the hat, fasten the zipper, button and sealing strip, and two people check each other. If the protective clothing can't completely fit the face, it can be fixed with adhesive tape. If the protective clothing in use is damaged, it should be replaced in time.

Second, wear goggles.

Hold the goggles with one hand, and pull the belt to the top of your head with the other hand, and adjust the position to ensure that the skin mucosa is completely covered with protective articles. Put on inner gloves. The inner layer of gloves should be dark. Check whether there is any damage, and make sure that the cuffs of protective clothing are completely wrapped after wearing. If the gloves are damaged, they should be replaced in time.

Third, wear boots.

Wear isolation gown. After putting it on, check and make sure that the back is completely wrapped. If blood and body fluids are contaminated or damaged, isolation gown should be replaced in time. /AC 6 eddc 45 1da 8 1 CBC 4037 ab 24266d 0 1608243 1ec？ x-BCE-process = image % 2f resize % 2Cm _ lfit % 2Cw _ 600% 2Ch _ 800% 2c limit _ 1% 2f quality % 2Cq _ 85% 2f format % 2Cf _ auto