How to draw vibrato in CAD version

After the Tik Tok fire, the heat continued unabated, and even its logo became a fashion. Ps version is the most common design parameter in various studies. This is a CAD version of the drawing method.

Caxa tool/material computer

0 1 First, open CAXA software and create a blank drawing;

Draw a 100× 100mm fillet box with a radius of16 mm; Taking the origin of the coordinate system as the center;

Then draw a note in the Tik Tok logo, with the specific dimensions as shown in the figure, which has been verified and is consistent with the original figure;

04 After drawing a note, translate it to the upper left and copy it. The input offset is (-3,2), as shown in the figure;

05 Next, process the layers, first hide the dimension line layer, then create two new layers, with blue RGB as (89,255,253) and red RGB as (25 1, 23,86), and then confirm;

Fill the middle area with the filling function in the thick solid line layer, which is white;

Switch to the blue layer, and use the fill function to fill the three areas in the figure, which is the set blue;

08 Switch to the red layer, and use the fill function to fill the three areas in the figure, which is the set red color, and the final effect is as shown;

In particular, the proportion has been determined and the size can be adjusted as needed;