How to repair the broken screen window?

Invisible screen window is the simplest and most effective way for many people to prevent mosquitoes from entering the room. However, some screens will not only have a lot of dust after being used for a long time, but also their edges and corners will always be slightly damaged. At this time, we can actually replace the screen window ourselves, but it is relatively complicated to do it ourselves, and we can also find other masters to install it. In fact, replacing the screen window is very simple. If the screen is too dirty or has holes, it is recommended to replace it directly. Compared with cleaning or repairing loopholes, it saves much time and effort, and the tools used are quite simple. However, there are still many people who will not replace the screen window. Today, the master will teach you how to change the screen window skillfully.

burrow

First, remove the screen window, pry up the wooden bar of the old screen window with a screwdriver, and then pull up the whole wooden bar of the old screen window to replace the screen window. Usually, the window screen will be replaced with the battens, and then the window frame will be sized and the excess pvc will be cut off. After confirming the size, insert the pvc strips into the triangle to make the frame. Align both sides of the new gauze with the inner edge of the window frame, and reserve enough parts for pressing and fixing. Lay the gauze flat on the finished frame and press it into pvc strips with grooved magnetic strips. It is suggested to tilt the slotted magnetic strip, push the gauze into the inner side of pvc strip, and then press the outer side. Absorb the adhesive-backed magnetic stripe on the magnetic stripe of the card slot, install a second clip at a position about 30% away from the top of the frame, and pull the protective film of the adhesive-backed magnetic stripe at the position where the clip is installed, and then install it in the clip. Window frames must be clean and kept dry. First, tear off the protective film of the upper adhesive magnet. After fixing the position, gradually tear off the adhesive-backed protective film at the left, right and lower ends and the clip, and press the adhesive-backed magnetic strip hard. Press in the whole pressing strip with a rope press car dedicated for screen window. It is more convenient to press the fixed corner with a screwdriver.

Fixed; unchangeable

When fixing the third side and the fourth side, tighten the gauze, press in the layering, and finally cut off the extra layering. Press the end with a screwdriver and fix it, cut off the excess gauze along the edge of the window frame with a utility knife, and install strings on the lower two triangles to open and close the screen window, so that the invisible screen window can be installed, and it is very convenient to take it off directly when not in use.

screen

Among all anti-mosquito methods, screen window is the most environmentally friendly, effective, economical and healthy anti-mosquito method. Screen windows can prevent mosquitoes from contracting dengue fever and Japanese encephalitis. Moreover, it can prevent outdoor dust and bacteria from entering the home. It is not difficult to replace the screen window and the screen window of the screen door by yourself. You can replace it yourself with the right tools, which is convenient and saves money! Compared with buying a new screen window, it can save about 1/2 ~ 1/5. Is this a good deal?