16. What are the requirements for the enclosure setting on the construction site?

The inspection and evaluation of civilized construction guarantee projects in Standard for Safety Inspection of Building Construction JGJ59-2113.2.3 shall meet the following requirements:?

1. Beautify the construction enclosure. Beautify the enclosure along the construction line, spray the heating enterprise name, safety, quality and civilized construction terms, and it is forbidden to post or scribble garbage advertisements.

2. The installation of the construction enclosure shall be carried out in coordination with the progress of the project, and must be completed before the construction of this section of the project, based on half of the road surface. The enclosure should be placed neatly and firmly, and the placement position should be based on the principle of not obstructing road traffic and pedestrians. Except the entrance and exit, it must be closed continuously to ensure that the construction site is isolated from the outside world. Traffic guidance signs should be made before the enclosure, and special personnel should be assigned to maintain traffic order during construction. Residual soil, construction materials and other sundries are not allowed to pile up near the enclosure area, and the area shall be kept clean and tidy.

3. Material selection for municipal construction enclosure The construction enclosure along this bid section is made of blue colored steel plates with a thickness of not less than .45 mm. The colored steel plates are made of ∠6X4 angle steel as the skeleton, and the back of the enclosure is supported by 3mm steel pipes, which are stable on the existing road surface. The enclosure legs are welded with steel bars and fixed on the ground to increase the wind resistance stability of the enclosure.

4. The construction enclosure requires that the enclosure on the construction site can effectively prevent the spread of dust and noise, which is an indispensable safety protection measure on the construction site. However, individual crossing enclosures will block the sight of passers-by, and it is quite dangerous for pedestrians and vehicles to pass by. For the sake of traffic safety at the intersection, the enclosures along the construction on both sides of the intersection are 1.5 meters high and 3 meters wide. This is convenient for pedestrians and drivers to see the road conditions clearly and improves the construction safety.

5. Other requirements: Steel pipes and protective nets shall be used for enclosure around the trench and foundation pit, and safety warning signs such as beware of falling and keep away from it shall be set. Set up signs such as speed limit slow-moving signs and beware of vehicles in grade crossing along the route.

6. Daily maintenance and management of enclosures The enclosures set up shall be managed according to the principle of "whoever sets them shall manage them". The enclosure on the construction site shall be maintained by special personnel, and it shall be kept intact, clean, beautified and undamaged. After the construction, it shall be removed, and the construction site shall be cleaned to maintain a safe and civilized image and reach the civilized construction standard.

7. The Project Department supervises and manages the project department to inspect the enclosure on the construction site on a regular basis, and regards it as an important content of creating a safe and civilized construction site. When problems are found, it will issue rectification opinions in time. For the construction zuoyedui whose rectification is not up to standard and the circumstances are serious after the deadline, it will be ordered to stop construction, rectify within a time limit and be punished according to the corresponding provisions.

Extended information:

The construction site must be managed in a closed way according to the Hygienic Standard for Site Capacity of Construction Projects in Beijing, and the height of the enclosure shall not be less than 1.8m.. The color of the enclosure should be light blue, gray or white, so as to avoid pollution and paint shedding. The enclosure can be painted with light blue, gray or white paint to spray the construction enterprise logo and project name. The standard for setting the logo of the construction enterprise and the name of the project is: "XX project undertaken by XX company", the font is imitation of Song Dynasty, the font size is .6m x .8m (width x height), the lower edge of the font is .6-.8m from the ground, and the font must be correct, standardized, neat and beautiful.

the enclosure shall not be used for retaining soil and bearing load, or relying on the enclosure to pile things or materials, or using the enclosure as a wall to set up temporary sheds, canteens and toilets. The construction general contractor is responsible for the setting and management of the enclosure on the construction site. The construction unit shall be responsible for the enclosure that has not yet been constructed, and the enclosure management unit shall do a good job in the maintenance and cleaning of the enclosure, keeping the enclosure clean and free from disorderly posting, scribbling and portraying. Where slogans and publicity materials are set above the enclosure, they shall be set in accordance with the scope, location, quantity, specifications, content and time limit approved by the municipal administrative department. It is forbidden to use the enclosure on the construction site to set up outdoor advertisements. If the enclosure is not set as required on the construction site, the municipal and district urban management law enforcement departments will punish it according to law; The municipal and district construction committees will order them to make corrections within a time limit or stop work for rectification. If they fail to make corrections within the time limit, they will be transferred to the municipal and district urban management law enforcement departments for handling

Reference: Baidu Encyclopedia-site enclosure.