Introduction of solder paste printing machine

LT- 180A Are you still stirring the solder paste by hand in your electronic process? Please be responsible for your SMT quality and the health of SMT personnel. LT- 180 series developed by Rio Tinto in Japan has successfully solved the problem of defective rate caused by solder paste and solder paste printing for many electronic enterprises, serving well-known enterprises such as Panasonic, Casio and Foxconn. 80% of SMT welding defects come from printing, and 70% of printing defects come from poor mixing of solder paste. Examples are as follows.

1, poor solder paste flux and insufficient uniformity of tin powder, resulting in poor welding!

2. Bad solder paste is not sticky enough, and the components of solder powder flux are volatilized, so it is easy to drop materials or offset devices during mounting!

3. The solder paste contains bubbles (air), and there are tin explosions and Chacon during welding.

These problems are solved by the automatic solder paste mixer of Rio Tinto LT- 180A!

Leading mixing technology, strong mixing force

Technology from Japan: rotary and rotary mixer

It can defoam at micron level, and you are not only aiming at solder paste.

Suitable for electronic materials, cosmetics, medicines, and various occasions requiring high-precision stirring.

Characteristics of LT- 180A, a revolving and rotating mixed solder paste defoaming mixer;

The product has high automation, stable performance, simple operation, high safety factor and simple and fast maintenance.

1. Unique shape design, beautiful, generous and practical, made of advanced baking paint technology.

2. The principle of mixing is based on the mixing mode of motor revolution and rotation, which can be mixed in a short time without taking out the frozen solder paste to deice first.

Over time, the solder paste will be heated and stirred evenly, and then it can be used.

3. A super mixer, which can handle stirring and defoaming (degassing) at the same time by stirring at an acceleration of about 200G generated at a rotation speed of 1000 rpm.

4. Suitable for various brands of 500g solder paste, two cans are stirred at the same time, saving stirring time and improving production efficiency.

5. In the process of stirring, the solder paste box does not need to be opened, so that the solder paste will not be oxidized and will not absorb moisture.

6. Closed stirring can fix the running time, ensure the stability of solder paste softness (Q), mix old and new solder paste, and also

A new active solder paste can be obtained.

7. This machine is controlled by JSS48B series time relay, with simple operation and high reliability.

8. Although the capacity is large, it is small and light. Easy to move, suitable for medical, industrial, university and other purposes.

Machine parameters:

Voltage: 220 volts AC.

Revolutions: 500 revolutions per minute

Rotational speed: 1000 rpm

Overall dimensions are 390× 390× 390 mm.

Delay precision set point delay error

The voltage change between AC85 AC85-264V has no effect.

Reset mode power-off reset

Control Mode Power-on Delay Manual Mixing Effect Diagram:

The interval of repeated actions should not be less than 0.5s

Output capacity AC250V 3ADC24V 3A (resistive)

Insulation strength 100 mω/500 DC

The dielectric strength is 2.5kV/min.

Power supply voltage DC12vdc 24v–5 ~+10%

AC85-264V AC24V AC 12V

Mechanical life 1 ~ 100000 Electrical life 5 ~ 100000.

Maximum power consumption is 300W w.

The ambient temperature exceeds -23℃-60℃

When the ambient humidity exceeds 35-80%RH.