Warship manual slogan

Small batch production of 20 ingredients

Small composition (1):

My little work-Lantern

I made a small lantern today. Do you know how lanterns are made? Now let me tell you!

First, you should prepare 12 sticks, a long stick, a rectangular piece of paper, a thread and a candle. These are all materials for making lanterns. Step 1: Take out eight sticks and put them into two squares together, then use four sticks as pillars, put 1 square up and down, and connect the two squares with the four pillars firmly, and the framework of the lantern is formed. Then take out a piece of paper and draw a pattern you like on it around the lantern rack. At this time, the prototype of the lantern was formed. Then take out two lines and tie them at the bottom of the lantern, then stick a piece of paper in the center of the line and put the candle on it. In order to make the lantern easy to carry, you need to tie four small holes in the upper end of the lantern with a scale, pass the cotton thread through it, and finally wrap the cotton thread around the stick. At this time, the lanterns will be finished!

Look, isn't this lantern beautiful? You should make one and show it off among your friends!

Small composition (2):

I touched it gently and it shook slightly. Can you guess who it is? This is a tumbler. I made it myself.

After school at noon on Thursday, as soon as I got home, I couldn't wait to take out my eggs and knock on the table. I didn't expect that all the eggs were broken and I had to start over. This time, I learned the last lesson, pointed the pointed end at the table and tapped it gently. Suddenly, one end of the egg was broken. I dug a hole the size of a coin in the damaged part, tilted the egg, and the yolk and protein quickly flowed out. Then I washed the eggshells and dried them.

At this time, the key step in production has arrived. I found plasticine and tore it into small pieces. I gently hold the eggshell with one hand, and carefully put the plasticine into the eggshell with the other hand, for fear of breaking the eggshell. In the middle of playing with plasticine, I slowly flattened plasticine again. I stood the egg on the table. Although I stood up, it was still wobbly. I put the chopsticks in, carefully filled the gap and pressed it more evenly. Then put the eggs on the table. Wow, the egg is still.

After that, I drew big round eyes and a curved red mouth outside the eggshell. But it always feels bad to look left and right. Oh, I had a brainwave and had a good idea to make a hat for it.

So, I took out a piece of green colored paper, cut out a semicircle and made a pointed hat. I put it in the opening of the egg, just right. On second thought, I drew some patterns on the hat, which looks much more beautiful.

Finally finished, a lovely tumbler doll appeared in front of my eyes at this moment. When I touch it, it wobbles. It's so funny and cute!

Small composition (3):

Today, the teacher assigned homework and asked us to go home and make a small production.

I like white rabbits best, so I decided to be a walking white rabbit. I immediately found the materials: plastic bowl, old battery (No.5), rope, rubber band 1, black pen, colored paper, transparent adhesive and scissors. First, I drew the mask of the white rabbit on colored paper and cut it out. Then cut a hole in the edge of the plastic bowl, make a small hole in the bottom of the bowl, and then hang rubber bands on both sides of the bowl. Then, fix the old battery on the rubber band with a transparent object, twist the tied old battery ten times in the same direction, adhere to the twisted state of the rubber band, stick the rope to the battery, and thread the rope out of the small hole. Finally, be the main body and stick the white rabbit on the main body. My masterpiece was born, so proud!

Small production, cultivate my ability to use my hands and brains, it brings me fun, I really love small production!

Small composition (4):

My small production boat

On Sunday, I do my homework at home. After finishing my homework, I watched TV for a while. I saw a big ship sailing on the vast sea on TV. So I want to make my own boat.

So I started, and I found the materials: a rectangular foam, a knife, a sticker, glue, cardboard, a toothpick, red paper, batteries, wires, a motor and a propeller. I'll start working as soon as the tools are ready.

I made the hull first, cut it out with plastic foam according to the shape of the ship, and then drew some patterns on it to make the ship more beautiful. Then I stuck some cannons on the ship, made a red flag with red paper, inserted it into a toothpick, and then inserted the toothpick into the ship, and the ship was finished.

The next step is to make the ship's drive. I installed the motor and propeller, then connected the wires with the motor and battery, and finally pressed the driving device on the boat.

The installation is completed and the sea trial begins. I turned on the power control switch and put the boat in the water, haha! My warship has set sail, and it has set sail successfully!

After this small production, I understand a lot of truth and taste the success and joy of making it myself!

Small composition (5):

My small production plasticine plane

On Sunday, I finished my homework and had nothing to do. Suddenly I saw a box of plasticine on the bookcase. I had a brainwave and wanted to make a plasticine plane myself. The materials used to make plasticine plane are plasticine, ruler, bamboo stick, etc.

I first knead the red plasticine into an ellipse as the fuselage of the plane, and then draw a small window on the oval fuselage with a bamboo stick. I use green plasticine to make the wings of the plane: first flatten the plasticine with a ruler, and then I pinch the wings on the left and right sides of the plane. I pinched two ellipses with orange plasticine as the tail of the plane and fixed them on the fuselage with bamboo sticks. Finally, I made round wheels with black plasticine, and put a bamboo stick between each two.

A brand-new plane is finally finished! After a while, the children on the third floor came to my house to play. As soon as they entered the door, they saw the plane I made myself. I watched TV on the sofa for a while and then looked at him, only to find that he had a good time! My heart is full of joy, because I made it myself.

Small composition (6):

At noon on Sunday, my parents and I made a small production together. We used plasticine. We worked together like archers, shooting at a wolf that was about to eat a white rabbit. We first made the archer's head with white plasticine, then made the bow and arrow with red plasticine, and then made his hand. I used flesh-colored plasticine. Then I made the feet of two archers, and then I touched the arrows in the archers' hands. I made these. Dad became a wolf, and the color of plasticine used was gray-black. Mother made a lively and lovely little white rabbit with white plasticine. Her long ears are like a real white rabbit. The white rabbit looks scared because there is a fierce wolf next to it. I secretly pointed the archer's arrow at the wolf's head and fired a sword.

I knocked the wolf down. The white rabbit smiled at the kind archer, as if to say thank you for saving me. Looking at the plasticine of our cooperation, I smiled happily!

Small composition (7):

My small production-colored mud rabbit

Today I'm going to make an interesting thing with colored mud-colored mud rabbit.

Since it is called colored mud rabbit, of course, you should prepare beautiful colored mud! I first pinched a rabbit's head with white mud, then pinched two ears with the same size and length with light pink mud, and also pinched a bow with many colored dots stuck on it, which was very beautiful. I made a skirt with lavender mud and made many patterns, such as five-pointed stars, small flowers, butterflies and love. Finally, I pinched the rabbit's limbs with white mud, gave it a pair of exquisite shoes, and then glued all parts of the rabbit together, and it was finished.

Just put the colored mud rabbit on your finger and you can play.

The colored mud rabbit is not only simple to make, but also beautiful. How about your little work?

Small composition (8):

In our life, besides attending classes, we just play hide and seek, jump rope, ride bicycles and swing in our spare time. How boring! If only I could kick shuttlecock. So I decided to make a badminton. Because I heard from my mother that she can kick shuttlecock, I can ask her for advice. You know, in my life, I have made many small productions, but I didn't want them for fun. However, I like this little shuttlecock very much. Since then, I have been addicted to kicking shuttlecock.

I remember when I was about to make a shuttlecock, I vaguely remembered what my mother had told me before: "To make a shuttlecock, you need wool, copper wire, fine wire and scissors." I brought some wool, bought a copper wire outside, took a thin wire to grandma and took a pair of scissors. In this way, everything is complete and I am very happy. I said excitedly, "Haha, the word' eight' is a bit biased." My mother was passing by and asked me what I wanted to do. I looked like a successful shuttlecock and proudly said, "I want to be a shuttlecock." Mother said, "Then you should work hard."

I picked up the wool first. I didn't know how to do it, so I asked my mother. And then I started doing it. I'll first fold the wool into a length of about one meter, that's all. I will always fold in half, always fold in half. When it is folded to the required extent, I will tie it in the middle of the wool with a thin iron wire and then tie it tightly. Tie the remaining thin iron wire to the copper wire or tie it tightly. Finally I cut the wool with scissors and turned it into a shuttlecock. I can't wait to kick it, but I just can't.

Although you can't kick shuttlecock, you should learn slowly. Although this shuttlecock is not beautiful, I am very happy.

Small composition (9):

My little work-plastic bottle flowers

Today, my mother and I made a "plastic bottle flower". Its making process is simple and easy to learn.

First, I found a 2.5-liter Sprite bottle, emptied the remaining Sprite inside and washed it with clear water several times.

Then I cut off the bottle mouth with scissors, and then I painted some paint from top to bottom. After that, cut the bottle body into strips about 5 mm wide and cut it to the junction of the bottom of the bottle and the bottle body. This process should be extremely careful and patient, and try to keep the cloth as thick as possible. The vase flowers made in this way are beautiful.

Then, the cut thin strips are drawn out in odd numbers and folded in even numbers to form two layers with patchwork inside and outside.

Finally, flower arrangement. I found colorful blow-molded paper and cut it into petals, leaving a small hole with a diameter of 5 mm in the middle. I put these colorful petals on the green "branches" one by one.

As long as the plastic bottle flowers are exposed to the sun, you will find that the petals are withered and the color of the bottle is dry. After listening to my introduction, you must have learned it! Go and have a try!

Small composition (10):

I am a smart girl, of course, I like small production. One day, I found a toothpaste box, beautiful wrapping paper, lovely cartoon sticker, scissors, glue, ruler and pencil to make a pen container.

Everything is ready, let's get started. I first draw a vertical line in the middle of the toothpaste box, and then measure an equal distance on the left and right sides of the vertical line to draw an isosceles inverted triangle. Then draw the same triangle in the same position on the opposite side. Draw two parallel lines on the top of the box to connect the front and back triangles. Then I asked my mother to help me draw a gap along the drawn line with a knife, and then I cut two triangles neatly with scissors to make a V-shape. Fold the cut box down in half from the middle, stick the two ends of the box tightly together with glue, wrap the surface of the box with wrapping paper, and then stick the wrapping paper firmly with glue. A homemade pen container is formed! Finally, decorate the pen container with my favorite cartoon sticker, haha! A very practical and lovely pen container was born! Mom says it's called changing "waste" into "treasure"

The next thing to do is to let my pen pals move into their new homes. When I do my homework every day, I look at the pen container I made, and I feel energetic and do my homework more seriously.

Small composition (1 1):

In today's class, under the leadership of Mr. Wei, we had a small production activity, and the students were full of enthusiasm. According to the materials I brought, I made a doll, a lovely doll. Do you want to learn? Let me tell you something.

The material for making dolls is simple, and waste cloth can also be replaced by plastic. ), table tennis, white paper, adhesive tape, watercolor pen, scissors, etc. First, put the ping-pong ball in the center of the cloth, wrap it in turn, and tie it tightly with thread, and the doll's head and body have been formed. Use a cloth-wrapped ping-pong ball as the doll's head. Draw the doll's eyes, nose and mouth on one side with a watercolor pen and paint two red faces. Draw hair at the top with a black watercolor pen. Of course, the shape of hair can be freely played, and you can draw whatever you want. Next, cut two holes on both sides of the cloth with scissors, roll out two arms with the remaining cloth, put them in the cut two holes respectively, and sew them with needle and thread. Then, cut the white paper into two hands with scissors, and stick the hands on the lower ends of the two arms with adhesive tape. Finally, roll up the two legs with the rest of the cloth, sew them with thread, and put them on the back of the body to droop naturally. Charming and lovely dolls appear in front of us at this moment, saying hello to us in a friendly way and selflessly conveying happiness to the world! Put your hand into the doll's arms, and the doll can still move. One minute it's waving to you, and the next minute it's waving to you. It looks so cute! How's it going? Why not try it! Try to use your imagination. Maybe you can do better than me!

The classroom is very lively, and the students' small productions are varied and varied. The students are all excited to introduce themselves to Mr. Wei!

After this small production activity, it not only cultivated the students' ability to use their hands and brains, but also enriched our classroom life. I looked at my masterpiece, so happy!

Small composition (12):

The piggy bank I designed myself is very cute. The piggy bank is all green, and the green coat is dotted with a few lavender wildflowers and colored lace inlaid at the edge. Really beautiful!

Let me introduce the birth of my masterpiece, which is still a coincidence. Once, my mother bought a box of iced black tea in the shop, and others gave her a lot of coins. Mom didn't say composition. Coins are hard to keep and easy to leak. Let me keep it for her. I don't have a piggy bank at home. Where can I put it? I'm worried, huh? The art teacher asked us to make a handicraft at home and hand it in the next day. Why don't we make a piggy bank If you are thirsty, drink a bottle of iced black tea first! When I was about to throw the empty bottle into the trash can, it occurred to me, wouldn't it be nice to make it? It's fine, but the neck is too small to put money down and get money. Yes, I cut off the bottleneck and left the middle and lower part. So rough, how to give the teacher a job? Just stick some flowers to decorate it. Then find it? I just cut the flowers on my old clothes and the lace on my broken socks.

What kind of design is better? First, I cut the purple cardboard into a trapezoid, stuck the lace on the bottom of the trapezoid, and made a lampshade together. Then I cut a circle to cover the seal and made a movable door, which is convenient for putting money and withdrawing money.

Then stick a few flowers on the bottle at the right place, and finally draw a rainbow, a bird and a butterfly on the cardboard with a colored pen. Isn't this a wonderful meticulous painting of my piggy bank?

Unfortunately, at this moment, it is still very spacious, because I didn't pay my pocket money! All the property is only thirteen yuan.

However, there is the most precious money in it, which you have never seen before. The front is a bust of Chairman Mao, and the back is the West Lake in Hangzhou.

Small composition (13):

This week, the teacher asked us to make a small production. After thinking and thinking, I finally decided to be a tumbler. Just do it, the material is; Eggs, clear water, cardboard, die first, fine sand, scissors, thumbtacks, markers. The materials are ready, and we are going to be a tumbler. First of all, I stuck a small hole in the head of the egg with a thumbtack, carefully poured out the yolk and egg white and brewed them with water. Then, put in a third of the fine sand. After that, cut out a little cardboard and stick it on the hole to cover it. Finally, draw your favorite pattern with colored strokes, and the tumbler will be finished.

I touched my "Mickey" tumbler with my finger, but it didn't fall down, as if to say, "You can't push me!" I touched it a few times, but it still didn't fall. I shouted angrily at it: "wait and see if you can be arrogant!" " ""Mickey "seems very clever. He understood what I was going to do before I started. Its euphoria turned into a sad face.

Finally, because of its lovely appearance, I spared it.

Small composition (14):

I am alone at home on Sunday. After finishing my homework, I turned on the TV, just in time to see a ship sailing on the vast sea. So I had a whim and made a small electric boat myself.

Do it. I found the materials first: a rectangular piece of foam, a knife, stickers, glue, cardboard, toothpicks, red paper, batteries, wires, motors and propellers. When the tools are ready, we will start to work.

I'll make the hull first. According to the shape of the ship, plastic foam is cut out and the hull is decorated with colored stickers to make the ship more beautiful. Then a piece of cardboard was folded into a small cabin, glued to the boat, made several cannons, and found several little people on the boat to control the cannons. Cut the red paper into red flags, put them on toothpicks, and put them in the boat, so that the hull is ready.

Next, it's time to sail I installed the motor and propeller first, then connected the motor and battery with wires, and finally pressed the driving device on the boat.

The installation is completed and the sea trial begins. I turned on the power control switch and put the boat in the water, haha! My warship is about to set sail! Before I could pull myself together, the problem appeared. The ship is circling in the water, but it just doesn't go forward. Alas! What's going on here?

In order to understand this, I looked up many books and found nothing. Thinking of the computer, I finally found the answer on the internet: the original ship is controlled by the rotation of the rudder. I suddenly realized that I quickly installed a rudder for the ship, hehe! As a result, you can imagine.

After this small production, I understand a lot of truth and taste the success and joy brought by hands-on!

Small composition (15):

I am alone at home on Sunday. After finishing my homework, I turned on the TV, just in time to see a ship sailing on the vast sea. So I had a whim and made a small electric boat myself.

Do it. I found the materials first: a rectangular piece of foam, a knife, stickers, glue, cardboard, toothpicks, red paper, batteries, wires, motors and propellers. When the tools are ready, we will start to work.

I'll make the hull first. According to the shape of the ship, plastic foam is cut out and the hull is decorated with colored stickers to make the ship more beautiful. Then a piece of cardboard was folded into a small cabin, glued to the boat, made several cannons, and found several little people on the boat to control the cannons. Cut the red paper into red flags, put them on toothpicks, and put them in the boat, so that the hull is ready.

Next, it's time to sail I installed the motor and propeller first, then connected the motor and battery with wires, and finally pressed the driving device on the boat.

The installation is completed and the sea trial begins. I turned on the power control switch and put the boat in the water, haha! My warship is about to set sail! Before I could pull myself together, the problem appeared. The ship is circling in the water, but it just doesn't go forward. Alas! What's going on here?

In order to understand this, I looked up many books and found nothing. I thought of the computer and finally found the answer on the internet: the original ship is controlled by the rotation of the rudder. I suddenly realized that I quickly installed a rudder for the ship, hehe! As a result, you can imagine.

After this small production, I understand a lot of truth and taste the success and joy brought by hands-on!

Small composition (16):

Whenever I see others have their own bookmarks, I envy them. When will I have my own bookmark? Ha ha! Last chance, the teacher asked us to make a small production. By the way, I don't have a bookmark yet. Why don't I make a bookmark?

I went to my room and began to look for materials to make bookmarks. I found a shoe box, scissors, a drill, a watercolor pen and colored wool. Everything is ready. Let's start doing it now.

I cut the shoe box with scissors first, and cut it carefully, but I was careful, but I still stabbed my hand and my blood flowed down. I don't care whether I like it or not. I'll make a bookmark after I wipe the blood off. Then I drew my favorite pattern on the shoebox with a pencil. I like small animals best. Why don't I draw a puppy? It's really beautiful. I smiled smugly. I drilled a small hole with a drill and rubbed colorful wool with my thumb and forefinger. One end of the wool became straight and thin, and I gently inserted the tiny end. Then I arranged the tail end and the head end of the wool together, turned them into a small circle and put them together. I immediately pulled hard and tied a slipknot. Finally, I drew many beautiful colors on the puppy with a watercolor pen. In this way, a beautiful puppy bookmark was born.

After this small production, I understand: nothing is difficult in the world, nothing is impossible to a willing mind.

Small composition (17):

The piggy bank I designed myself is very cute. The piggy bank is all green, and the green coat is dotted with a few lavender wildflowers and colored lace inlaid at the edge. Really beautiful!

Let me introduce the birth of my masterpiece.

Speaking of which, it's still a coincidence. Once, my mother bought a box of iced black tea in the shop, and others gave her a lot of coins. Mom didn't say coins are difficult to keep and easy to leak. Let me keep it for her. I don't have a piggy bank at home. Where can I put it? I'm worried, huh? The art teacher asked us to make a handicraft at home and hand it in the next day. Why don't we make a piggy bank

If you are thirsty, drink a bottle of iced black tea first! When I was about to throw the empty bottle into the trash can, it occurred to me, wouldn't it be nice to make it? It's fine, but the neck is too small to put money down and get money. Yes, I cut off the bottleneck and left the middle and lower part. So rough, how to give the teacher a job? Just stick some flowers to decorate it. Then find it? I just cut the flowers on my old clothes and the lace on my broken socks.

What kind of design is better? First, I cut the purple cardboard into a trapezoid, stuck the lace on the bottom of the trapezoid, and made a lampshade together. Then I cut a circle to cover the seal and made a movable door, which is convenient for putting money and withdrawing money.

Then stick a few flowers on the bottle at the right place, and finally draw a rainbow, a bird and a butterfly on the cardboard with a colored pen. Isn't this a wonderful meticulous painting of my piggy bank?

Unfortunately, at this moment, it is still very spacious, because I didn't pay my pocket money! All the property is only thirteen yuan.

However, there is the most precious money in it, which you have never seen before. The front is a bust of Chairman Mao, and the back is the West Lake in Hangzhou.

Small composition (18):

Last month, the school organized our classmates to participate in the 23rd Beijing Science and Technology Festival for Primary and Secondary School Students. Teacher Lu, a science and technology teacher, asked me to take an active part in this activity and strive for a novel and unique work.

From that day on, after finishing my homework every day after school, I began to seriously think about what to do. Suddenly, an idea that I had before flashed through my mind, that is, a gangster entered our school last year and tried to destroy it, but was found and subdued by the school teacher. It is also reported that some primary schools and kindergartens also have gangsters breaking into and injuring people. Since then, I have always had an idea, that is, can we design a simple and practical alarm device, which can give an alarm to remind the staff on duty in the reception room when the off-campus personnel enter our school.

Yes! I made a model of this alarm system, so I looked up a lot of information on the Internet and humbly asked my parents about this knowledge, so that they could take me to the electronic component store to buy the necessary components.

After thinking and research, I decided to name this alarm device "magneto-optical school gate identifier". Do it. I found an animal toy when I was a child. This toy is a monkey controlled by a photoresistor. When you block the photoresistor with your hand and leave, it will make a sound, but the sensitivity is very low.

So I decided to replace the photosensitive resistor with a set of highly sensitive transmitting and receiving photodiodes. Because the working principle of toys is contrary to my requirements, after consulting teachers and parents, I added a triode as an inverter to turn the circuit into an alarm when someone passes through a photodiode, and added a normally closed reed switch to the sound circuit. When students in our school pass the photodiode with a special identification magnetic card, because the magnetic card will suck away the normally closed reed switch contacts, it will not give an alarm when passing. When the off-campus personnel without ID cards enter the school gate, once they pass through the photodiode, the alarm device in the reception room will sound an alarm.

After repeated experiments and continuous improvement, my "magneto-optical school gate identifier" was finally made. Looking at this elaborate work, my heart is full of pride and a sense of accomplishment.

When Mr. Lu took us to the High School Attached to Normal University to participate in the Science and Technology Festival Exhibition, my work was highly praised by the judges and teachers.

Although it has been almost a month, I still think about it often, because as long as I pay, I will get something back. I put a lot of effort into making this work, and this thing really makes me unforgettable.

Small composition (19):

Look, what is that thing swaying gently in the breeze and making a pleasant sound? That's the shop clock I made.

Does it make a nice sound? Is it exquisite? If you want to know the process of making it, please turn your eyes to it!

I crept into the kitchen and went to grandpa to drink the remaining bottles of oral liquid. I rummaged through everything in order to find it. However, something unexpected happened in the sky. Why does the empty bottle that always catches your eye disappear without a trace today? But God never shuts one door but he opens another, and the empty bottle is at my feet.

I happily picked up some empty bottles, found a piece of cardboard and a two-meter-long thread, and began to get busy.

I first came to the pool to pick up the detergent, poured it into a washbasin, then opened the lids of five bottles, turned on the taps and washed the bottles inside and out.

I cut the cardboard into a circle and drilled five holes in it. Then a hole was drilled in the middle and a thread was pierced, so that it could be hung on the thread.

When I took out the washed bottles, I accidentally got a "dog eating mud" and smashed all the bottles. Had to "nephew lanterns-the old rules".

This torture has delayed a lot of time, so we have to get to work quickly.

I picked up a small bottle and filled it with a small amount of water. Pick up another bottle and fill it with a little more water than the previous one. In this way, five bottles were poured continuously, forming five sounds of "1, 2, 3, 4, 5".

Then tie the bottle with a string and hang it on the cardboard, which is a delicate and beautiful wind chime!

Anyway, action is better than action, so just make one.

After this work, I understand the truth that "nothing is difficult in the world, but it is impossible for a willing mind".

Small composition (20):

One day, I saw how to make stone paintings in a small production book. I thought it was interesting, so I decided to give it a try.

On the way after school, I picked up many beautiful pebbles, some big, some long and some small and exquisite. I take them home. Wash and dry. Then, I went to find the "paper" for painting stones. It can't be made of drawing paper, but of cardboard.

Having finished the preparatory work, I began to draw. I drew a beautiful landscape painting with lead. After that, I made hills with bigger stones, streams with longer stones, and flowers with smaller stones. I glued them together one by one, and the stone painting was finished, but there seems to be something missing. I tried to find it for a long time. It is a lack of color. I also found watercolor paint and carefully put on a beautiful coat for each pebble. Ah! A colorful and lifelike landscape painting appeared in front of my eyes. It seems to say, "What a clever hand you have. Thank you. "

The stone painting is finished, and I look around. I'm so proud.