How to draw the factory road?

There are two kinds of road markings in the factory area: one is cold paint marking, and the other is hot melting machine marking. According to the road in the factory area, a pedestrian width of 2.5 meters is set aside on both sides of the design, which is separated by solid white lines and 7 meters by yellow lines in the middle. The 9-meter and 6-meter roads are two-way, with the edges of the roads drawn with solid white lines and the middle separated with dotted yellow lines.

Functions of road signs in factory area:

Road marking refers to traffic signs set up to ensure traffic safety and traffic order. It can make vehicles and pedestrians clearly know the location of driving and parking and the location of road edge lines, so that people driving or passing through intersections can master the correct driving direction.

Classification of road signs in factory area:

1. indicator

Signs used to indicate driveways, parking lots and other road sections.

2. No mark

A sign used to inform motor vehicle drivers that certain vehicles are prohibited from entering a certain lane or temporarily driving on the road.

3. Warning signs

Signs warning drivers;

4. signs of tourist areas

Set up signs indicating tourist routes at scenic spots, including signs leading to scenic spots and signs of tourist attractions within 30 meters from the starting point.

There are three common roads in the factory area.

1, white dotted line and white solid line segment are two different forms of roadway boundary. The white dotted line and the white solid line are used to distinguish different lanes driving in the same direction, that is, left-turn lane and straight lane (including left turn). The center line of the left-turn lane is separated by a solid yellow line for turning left. At the same time, a corresponding ground character sign "Turn left to turn" is set 200m to 300m in front of the yellow virtual-real dividing line, prompting vehicles to enter the area and wait for the signal light to release; The center line of the straight lane (including left turn) is separated by yellow double solid lines to go straight (including left turn), and at the same time, the corresponding ground character sign "Turn straight" is set at the position from 100m to 150 m behind the corresponding ground character sign, prompting vehicles to enter the area and wait for the signal light to be released;

2. The red dotted line and the red solid line are the dividing lines between two different types of roads. (1) The red dotted line is used to distinguish different lanes driving in the same direction, that is, right-turn lanes and straight (including left-turn) lanes. Set the corresponding ground text sign "turn right and turn" 200 to 300 meters in front of the red dotted line.

(2) The solid red line is the marking part at the opening of the median for motor vehicles to cross and overtake. When a car passes the car that is turning around or entering the opposite lane in front, it must pass through the opening of the median.

3. Twill grid with alternating yellow and virtual reality is a network structure set along the roadside, which is used to prevent trees or other objects on the roadside from collapsing and endangering driving safety.

legal ground

Road Traffic Safety Law of the People's Republic of China

Third road traffic safety work should follow the principle of management according to law and convenience for the masses, and ensure the orderly, safe and smooth road traffic.

Seventh road traffic safety management, should strengthen scientific research, promotion and use of advanced management methods, technologies and equipment.