Enterprise production safety self-inspection report

Enterprise safety production self-inspection and self-inspection report

Enterprise safety production self-inspection and self-inspection report. After entering the workplace, different reports are required for various jobs. , work safely, eliminate hidden dangers, and ensure life safety. The essence of safe production is to protect the life safety and occupational health of workers. Let’s take a look at the enterprise’s self-inspection report on production safety. Enterprise safety production self-inspection report 1

Carry out enterprise safety production inspections in accordance with the requirements of Wanfuban [__] No. 120 notice. The leaders of our company attach great importance to it, actively organize relevant personnel to organize and mobilize, and seriously carry out self-examination and self-correction, leaving no dead ends. Based on the existing problems and weak links, a rectification plan should be formulated according to the principles of designated personnel, time, measures and funds, and the rectification measures should be implemented to prevent accidents. The self-examination situation is summarized as follows.

1. Strengthen management and clarify responsibilities

In order to effectively strengthen the leadership of our company's safety production work in 20__, the company has adjusted and enriched the company's safety production leadership group, and strive to achieve Goals are clear, responsibilities are implemented, work is in place, and problems are nipped in the bud.

2. Detailed measures and implementation

Comprehensively implement the policy of “safety first, prevention first” and the spirit of relevant documents on municipal production safety work, and insist on management in accordance with the law , strengthen supervision, strictly inspect, and urge rectification so that hidden dangers can be eliminated, accidents can be controlled, and people's lives and property can be protected. Focus on supervision work, strictly prevent general safety accidents, eliminate serious and extremely serious safety accidents, and ensure the safety of people's lives and property.

3. Appropriate work content and measures

(1) Strengthen the publicity and education of safety knowledge and strive to improve the safety awareness of employees throughout the company. We should conscientiously carry out publicity and education on production safety laws, regulations and policies, advocate and implement the construction of safety culture, and enhance the company's employees' awareness of production safety. Second, enterprises must, in accordance with relevant requirements, proactively select personnel to participate in safety training and refresher training organized by superior authorities, and effectively train enterprise employees’ safety production knowledge and production skills

to ensure that special operations personnel and The employment rate of employees with certificates reaches 100%. Third, the Comprehensive Management Office assists the police station in regularly organizing motor vehicle drivers and owners to participate in training and education on road traffic safety laws to encourage them to enhance their awareness of road traffic safety and strictly abide by road traffic safety regulations. The fourth is to strengthen inspection and supervision to promote the institutionalization and regularization of enterprise safety production training and education.

(2) Strengthen safety responsibility management and establish and improve various rules and regulations. The first person responsible for the safety work of the unit is directly responsible for the unit's safety production work. He must effectively perform his duties, strengthen supervision and inspection, eliminate various safety hazards in a timely manner, and strictly prevent the occurrence of various safety accidents. First, we must conscientiously implement the safety production target management responsibility letter signed with the company

To ensure that we have posts, positions and responsibilities. Second, the company's production safety leadership group regularly organizes personnel to inspect and supervise the implementation of various departments, and registers the situation as a scoring basis for the year-end comprehensive assessment. Third, each unit must formulate and improve various safety production rules and regulations and safety production procedures based on its own actual conditions, and strictly implement them to eliminate the "three violations" and ensure that safety production has rules to follow.

(3) Highlight the key points, pay close attention to implementation, and increase the intensity of investigation and rectification of hidden dangers.

1. Comprehensive safety production inspections have been carried out regularly. The enterprise safety production leading group organizes a comprehensive safety production inspection every quarter. For major hidden dangers in key departments, it is necessary to urge them to formulate rectification measures, implement funds, arrange dedicated personnel to supervise rectification, and report the hidden danger inspection and rectification status to the city The Safety Committee; each village, each enterprise and the safety responsible unit organizes a safety inspection every month, discovers hidden dangers, formulates measures, implements designated personnel, makes rectifications within a time limit, and reports the situation to the enterprise's production safety leadership team in a timely manner.

2. Road traffic safety. First, we must conscientiously implement the responsibility system and promptly sign safety responsibility letters with motor vehicle drivers and owners to clarify responsibilities. The second is to assist relevant departments to carefully clean up and register the company-wide operating vehicles, especially dangerous goods vehicles, so that the total number and situation are clear.

For vehicles in poor condition, those that should be scrapped will be forced to be dismantled and scrapped, while those that have failed to pass must be supervised or forced to be inspected.

Carry out regular or irregular road inspections, intensify the crackdown on "three noes" vehicles and "three excesses" (overloading, overloading, speeding), and strictly prohibit scrapped and diseased vehicles from taking to the road. travel. Strengthen the inspection and monitoring of vehicles on road sections prone to safety accidents to prevent the occurrence of traffic safety accidents. The third is to increase publicity and education efforts, regularly organize motor vehicle owners or drivers to conduct road traffic safety knowledge training, and further enhance the road traffic safety awareness of employees.

3. Electricity safety. The Engineering Department must regularly organize professionals to conduct inspections of transmission lines throughout the company and promptly rectify existing safety hazards.

4. Strengthen the mediation of civil disputes. It is necessary to do a good job of conciliating some remaining disputes, and to detect and resolve new conflicts and disputes early, and to solve the factors affecting stability in the bud.

5. Construction project safety. The safety management of construction workers building houses has been strengthened, and safety protection facilities have been installed at construction sites. Ensure the safety of construction workers and passers-by. Those with serious safety hazards must be ordered to make rectifications.

6. Be highly vigilant at all times to guard against evil cult organizations such as "" and "" taking advantage of the difficulties encountered in economic development to penetrate into the grassroots, especially the people in need, and interfere in internal conflicts among the people to create trouble. Each village branch has a clear understanding and strengthens the monitoring, prevention, management and control of key personnel at any time, strengthens the cleaning, inspection and protection of key parts, key places and key places, and reports any findings in a timely manner. Ensure the economic development and political stability of our township.

IV. Existing problems and deficiencies

(1) The general public’s awareness of production safety is relatively weak, and the publicity and education of safety laws and regulations needs to be strengthened.

(2) Insufficient investment in safety production work.

Although we have achieved certain results in safety production work, there is still a certain gap between the requirements of the superior management departments. We will carry forward the achievements in future work, find out the gaps, and make up for the deficiencies. We will firmly establish that safety is guarantee and safety is benefit. To focus on safety is to focus on development, and to focus on safety is to consider the overall situation. Further enhance the sense of responsibility and urgency, establish the guiding ideology of "production must be safe, and safety is for production", earnestly perform duties, keep the alarm bell ringing, and work tirelessly to ensure production safety and economic development throughout the company.

______ Co., Ltd.

Enterprise safety production self-inspection report 2 on September 13, 20__

According to the "About Forwarding to the Autonomous Region Transportation Department" According to the requirements of the document "Notice on the Inspection and Supervision of Safety Production in the Transportation Industry in the District" (Liu Yigong [2014] No. 343), the Liuhe 11 Bid Project Department carefully carried out self-examination and self-correction work based on the actual situation of the construction. The project is now The summary of self-inspection and self-correction work on production safety is as follows:

1. Reflection on production safety, inspection, self-inspection and self-correction activities

1. Safety management organization

In terms of the construction of safety management institutions, our project department pays special attention to the deployment of on-site technology and safety personnel. Each work area is equipped with important personnel and departments such as the work area director, work area chief engineer, safety and quality department, and engineering department. Each work site at the construction site has on-site technicians and full-time safety officers standing by to supervise the whole process. All personnel have signed safety management terminal responsibility certificates to clarify the responsibilities of each manager to ensure that the safety and quality of on-site construction are controllable.

2. In terms of production safety management system

Through self-examination and self-correction activities, some work sites with incomplete safety production management systems and incomplete safety protection facilities are now gradually on the For example, the construction of the Liangsan Overpass with 12# on the left and 10# on the right piers was constructed with poured concrete. Before construction, there was no detailed system for safe construction management, and the on-site managers were not specific in their explanations to the construction team. Later, Chief Engineer Yang Hongquan of the project department used his free time in the evening to conduct a detailed safety technical briefing to the construction managers and construction personnel, signed a letter of responsibility for the relevant responsible persons, and formulated measures one by one for the matters that the construction team should pay attention to during the construction process. .

3. In terms of hidden danger investigation and management and monitoring of major hazard sources

At present, as the project of our project department is coming to an end, the major hazard sources are mainly controlled in the Liangsan overpass bracket formwork and span lines. In addition to the traffic safety of the concrete pouring construction of the secondary road, as well as the construction of beams and transport beams (Umbrella Bridge, Liangdi Overpass, Liutang Overpass Bridge), other major hazard sources such as tunnels have basically been completed. Our project department Manager Wei Dengbin organizes two large-scale production safety self-examinations and self-corrections every month

Deputy safety manager Lu Shaowei Jiaxiang leads the Safety and Quality Department and Engineering Department to organize two self-examinations and self-corrections on production safety every week `Small inspections will be carried out through monthly ten-day reports to report on the investigation and management of hidden dangers and the monitoring of major hazard sources in each work area and work site, and whether rectifications have been made in a timely manner. Units or individuals who fail to make rectifications in a timely manner will be financially punished.

4. Safety education and training and employment with certificates for special types of work

As the focus of safety production has been raised from the lower structure to the upper structure, most of the beam production in our project department involves high-altitude operations. , safety education and training work is particularly important. The project department has formulated a safety education training for beam construction every month; the certification status of each on-site construction operator is reviewed. Currently, our project department has nearly 200 on-site special work personnel. According to the on-site certificate holding situation, 100% of the special work types are working with certificates.

5. Management of the use of special equipment

Since the special equipment of our project department is basically concentrated in beam construction, the safety performance of the mobile formwork must be checked every day After the inspection, some stress-bearing components were re-tested for fatigue conditions after several beams were poured, and the bars that could not meet the safety performance were replaced. Due to the impact, the work was basically suspended from June to August, but the on-site special equipment was maintained normally.

6. Safety investment

Our project department has learned safety lessons from various engineering sites in terms of safety investment, and has spared no expense in safety production investment to ensure construction safety. Now we No safety issues were ignored at all work sites of the project department due to insufficient safety investment funds, nor were construction progress affected due to insufficient safety investment funds.

7. Emergency plan preparation and drills

Based on the knowledge of measures taken in case of sudden accidental injuries to migrant workers, and based on the actual safety construction and production situation of our project department, especially in Yihe Six Standards organized an emergency first aid drill, which ended successfully and was recognized by the owner and supervisor.

2. Problems

During this safety production inspection, *** found 33 problems, 15 were rectified immediately, and 18 were rectified within a time limit. The main problems discovered during the inspection are:

1. The scaffolding of the Liangsan span secondary road overpass was not erected in accordance with regulations;

2. The electricity used for on-site construction was not set up as required. (Liutang Bridge deck, Liutang T-beam precast yard, Liangsan Overpass) are not set up according to the requirements of the power distribution system of "three-phase five-wire system" and "three-level power distribution and two-level protection", and the switch box is not set up in accordance with the "one-level power distribution system". There are "machine, one gate, one drain, and one box" required settings, the erection of power lines is not standardized, and the lines are mopping the ground;

3. The "four ports and five edges" of the construction site lack safety Protection facilities;

4. The safety protection of the Liutang Overpass Bridge is not in place, and the safety net set up on the edge is damaged and does not meet the requirements;

5. The special box girder prefabrication site of the Liangsan Bridge Equipment use and management are not standardized;

6. Fire-fighting equipment is insufficient, expired, and not placed in conspicuous locations;

7. In response to the above safety hazards detected yesterday, all have been rectified complete.

3. Rectification measures

In response to the problems identified above, in the next step of work, we must strengthen measures to urge enterprises to rectify on time and review on schedule. Follow up and rectify to ensure that rectification is in place.

1. Strengthen leadership and establish awareness of production safety. It is necessary to strengthen measures, conscientiously implement the safety production responsibility system, put safety production work into an important agenda, and the top leaders must personally grasp it.

It is necessary to increase the intensity of safety production work, conscientiously implement the policy of "safety first, prevention first", adhere to the principle of who is in charge and who is responsible, implement the safety production work responsibility system at all levels, and be practical and meticulous. In particular, enterprises that have suspended or semi-suspended production and key units on safety and fire prevention must strictly follow relevant regulations to do a good job in production safety and fire safety.

2. Abide by rules and laws, and establish and improve safety production rules and regulations. Regarding the requirements for safe production work, the safety production work rules and regulations, job operating procedures, and organizational structures have been established and improved to truly have rules and laws to follow, organizational implementation, system implementation, and measures implementation. At the same time, we must do a good job in publicity, education and training on production safety, and enhance the awareness of production safety and legal concepts among leaders and migrant workers.

3. Regular inspections, careful investigation of hidden dangers and rectification of hidden dangers. Our inspection work on production safety must be regular, institutionalized and standardized, and the word "diligence" should be mainly reflected in our work. We must frequently inquire, supervise and inspect frequently. Enterprises should be urged to speed up rectification of potential safety hazards raised during inspections, nip hidden dangers in the bud, and reduce the occurrence of safety production accidents.

4. Strict discipline and serious accountability. It is necessary to do a good job in preventing production safety accidents and prevent the occurrence of various accidents. Once an accident occurs, the accident reporting system must be conscientiously implemented and reported in a timely manner step by step. Units where production safety accidents occur must follow the principle of "four no-misses" and seriously investigate the responsibilities of the main person in charge and relevant responsible persons of the enterprise to ensure that the national and the safety of people’s lives and property.

4. The results of the safety production reflection, inspection, self-examination and self-correction activities

Through the safety production reflection, inspection and self-examination of the construction sites in our bid section Self-correction activities have eliminated potential safety and quality hazards in each work site of our company's projects, eliminated signs of major safety hazards, and prevented the occurrence of safety and quality accidents, especially in each work area, each department, and the construction team's awareness of safety hazard investigation. A rope.

In short, the project department has effectively promoted the safety production work in on-site construction through the conduct of this major reflection on production safety, inspection, self-examination and self-correction activities. The main body responsible for safety production in on-site construction has become clearer, the sense of social responsibility has been further enhanced, the safety awareness of employees has been significantly improved, and a strong and good atmosphere in which everyone pays attention to safety has been formed within the entire project. Enterprise safety production self-inspection report 3

In order to further strengthen and improve the safety work of the project department, respond to the call of the institute, effectively protect the life safety and property safety of the majority of employees, and ensure the normal construction order of the project, combined with the project According to the actual situation of the Ministry, our department has carefully and carefully inspected the safety work at the construction site, and carried out hidden danger inspection and management activities at the construction site. The self-inspection and rectification situation is summarized as follows:

1. Safety management

1. Establishment and improvement of safety organization structure

The project department has established a safety management network, safety production responsibility system, and safety management system with the project manager as the first responsible person. A full-time safety officer is assigned to be responsible for on-site safety inspections and safety inspections at the construction site, forming a top-down safety assurance system.

2. Implementation of safety management system and responsibility system

(1) At present, the project department’s safety regulations are complete and highly operable. Continuously improve the execution of safe and civilized construction systems to strengthen safe and civilized construction management and prevent accidents.

(2) In order to ensure safe production, the project department formulated safety target indicators and decomposed them layer by layer according to the relevant requirements of the company, clarified the safety responsibilities of personnel and departments at all levels, and during the construction process Supervision is implemented in place.

The project department signed a "Safety Responsibility Letter" with the heads of each construction team, and strictly implemented the safety production responsibility system at all levels and the safety accident liability investigation regulations. The quality and safety department of the project department has implemented the safety responsibility system Supervise, inspect and assess the implementation of the system, promptly remind and educate those who violate the responsibility system, and provide rewards and punishments based on assessment results.

3. Safety inspection and hidden danger investigation

In addition to daily safety inspections, the project department also prepares various safety warning signs based on on-site conditions. , construction signs, and place corresponding warning placards at the entrances, passages, and electrical equipment of the construction site to remind workers to pay attention to the safety of themselves and others, and to eliminate potential safety hazards.

4. Safety education and training

(1) The project department conducts timely safety education and training for new site managers and workers from time to time. The main contents of the training include: corporate rules and regulations, basic safety knowledge, construction safety precautions, various relevant safety technical measures and operating procedures, emergency rescue plan learning, etc.

(2) Participate in safety technical training and certification for electricians, welders, loader drivers and other special operations personnel as required.

(3) Each construction team conducts its own team safety education activities.

2. On-site construction safety conditions

1. Temporary facilities

(1) Temporary facilities are planned strictly in accordance with the requirements and the layout is relatively reasonable.

(2) Temporary facilities meet technical requirements such as fire protection, rainproofing, and heat preservation. Personnel are arranged to patrol the living and office areas, construction areas, warehouses, and mechanical equipment parking areas 24 hours a day to ensure the safety of on-site supplies and materials.

2. Safe use of electricity

The construction site ensures "one machine, one gate and one leak" for electrical equipment, ensuring the safety of electricity; warning signs are placed on power supply equipment . Lighting fixtures and power supply lines shall be installed as required. Electricians on duty will conduct regular inspections and deal with hidden dangers in a timely manner to prevent accidents.

3. Special equipment

A dedicated person is responsible for the daily operation, maintenance, and shift handover records of major mechanical equipment. During the use of equipment and transportation vehicles, regular inspections, repairs and maintenance should be carried out, and equipment operation, repair and maintenance records should be filled in. Immediately stop work, rectify or remove equipment with potential safety hazards. Scaffolding construction

4. Fire management

The project department has formulated a fire management responsibility system and implemented it in place. Developed and improved fire emergency plans.

The project department has increased inspection and monitoring of fire-prone areas. < /p>

(2) There are no violations in work areas or parts where fireworks or smoking are prohibited.

5. Safety protection facilities

During construction, safety management personnel can formally wear and use protective equipment such as safety helmets and safety belts; protective facilities and safety equipment are set up at cave entrances and dangerous locations. Obvious warning signs; fire-fighting facilities are installed near electrical parts and flammable materials.

3. Problems in safety management

1. Individual personnel have weak safety awareness, and habitual violations still occur at the construction site.

2. The layout of construction power lines is chaotic and needs further standardization.

3. Equipment is regularly inspected and various systems are improved; however, the inspection data and records of the equipment themselves are incomplete; further improvements.

4. Some safety protection facilities have not kept up with the progress of project construction, causing safety protection to lag behind during construction.

IV. Rectification measures taken:

In order to ensure the safety of project construction and eliminate various safety hazards, the project department proposed the following rectification measures for the main problems existing during the self-inspection process:

1. The project department will strengthen supervision and carry out safety education in batches, using daily inspections, inspections, meetings, safety education and training, bulletin boards, newspapers, documents and other methods to educate employee cadres on safety knowledge, Education and publicity on laws and regulations, etc., to improve employees’ safety awareness and sense of responsibility, and to prevent the occurrence of safety accidents.

2. We will continue to pay attention to the issue of electricity consumption in construction, strictly investigate the illegal use of electricity in workers’ dormitories, and conduct unified and standardized layout of on-site wiring.

3. Strengthen the supervision of habitual violations.

To strengthen safety education, management supervision and punishment, we must ideologically improve the safety awareness of employees.

4. Sound and perfect the system to promote comprehensive safety management work to be followed and implemented in place. Strictly implement the responsibilities of all levels and departments in accordance with the safety responsibility system.

5. Carry out safety inspections and hidden danger inspections and management on a regular basis in a timely manner and in accordance with the regulations of the project department, and do a good job in finding and rectifying safety hazards at the construction site.

In short, through this major inspection, some shortcomings and omissions in the safety work of the project department were discovered. The project department made timely rectifications and brought them under effective control, but safety work is a long-term task. The project department will continue to pay close attention to safety, consolidate the basic work of safety management, improve the safety awareness of the majority of employees, enable various tasks and requirements of safety management to be better implemented, further enhance their awareness of safety responsibilities, and clarify their respective responsibilities. Responsibilities to provide safety guarantee for the smooth progress of project construction.