Advantages of solar street lamp poles Assembly method of solar street lamp poles

With the popularization of solar street lamps, many consumers want to know the assembly method of solar street lamps. Here, let's take a look at the advantages of solar street lamps and the assembly method of solar street lamps and Bian Xiao for your reference.

Advantages of solar street lamp poles

The equipment is simple, and there is no need to lay messy lines. Dig a small pit and cement base and fix it with stainless steel screws. Solar lampposts rely on solar energy to convert into electric energy, so there is almost no investment after completion, only ordinary protection and aging repair of equipment are needed. Although the acquisition cost is relatively high. However, the capital will be gradually recovered later. The service life of solar street lamp poles is longer than that of municipal circuit lamp poles.

Method for assemble solar street lamp pole

1. Check whether the lamp pole model at the installation position is correct (such as single-head and double-head), and cooperate with the corresponding long and short cantilever; Cut the appropriate conductor to the corresponding position, and generally reserve 150MM at both ends of stripping.

2, install the jump arm and lamp holder, determine the position and levelness of lamps and lanterns, based on the lamp pole.

3. After wiring, check whether the lamp wire is fastened firmly.

4. Connect the light source and the wire, correctly connect the wire according to the instructions, and pay attention to the positive and negative poles.

5. Check whether the connection is firm after connecting the pipeline. In the process of installing the light source, pay attention to that the light projection surface of the light source should be perpendicular to the ground, not the cantilever surface of the installation.

6. After connecting the light source, first test the resistance value and the grounding phenomenon of the rod body with a multimeter, and then light it with a battery to confirm the correct connection.