Supermarket poster making tutorial video-How to make supermarket poster in PS

How to make supermarket posters

First of all. Details determine quality. Many people make posters, including myself when I first started. The process is -> decide the theme of the poster, collect pictures online, use PS to write text on the original picture, and finally deliver the poster for printing. OK, yes, everyone does this. There are some small details, such as the quality of the picture and the color tone. Often the pictures found on the Internet are compressed. You can use Ctrl T to change it to what you want. When it comes to large posters, the quality of the pictures is already very poor. What's more, when you deliver it to printing, they use the vector software CorelDRAW12 to enlarge it again. As a result, you can imagine that the entire poster will become blurry. Improved method 1. When creating a new poster, the specific property settings are resolution 120 or 300 pixels/inch, color mode: CMYKorLab mode, and then it depends on how big a poster you want to make. You must know the size of A0A1 or two A0s and set the length and width of the picture you want to make in proportion. See Baidu for specific sizes. Of course, you can't design a poster exactly in 1:1 size. Because PS is different from CorelDRAW, processing large pictures consumes a lot of memory. For example, making a picture is 100 cm * 100 cm. It will definitely freeze, which may be the weakness of PS. Therefore, you still need to set the length and width of the poster you want in proportion. It should not be too small or too large. Zoom in moderately. Just use pixels as the unit. This is the key to whether the poster is clear or not!! 2. Open a picture online or collected, and when you think it is very unclear or it is distorted after enlarging it. You can go to Image-gt; Image Size-gt; and enlarge the resolution to 300 pixels/inch or larger and then process the image to make it much clearer. 3. Elements of text. There is definitely no shortage of time, place, name of the club, and "please keep it until what date" - this is more important. It is best to arrange the text in a well-organized layout so that it is prominent and conspicuous. You can use different filters and the text effects you have learned, but the principle is that the viewer must see the key points of your poster in the Yunyun advertisement at the first glance. 4 Tones It is best not to exceed three colors in one layout. Safe shades can be gray black red blue etc. The application of filters is a bright spot, but it should not be used blindly. 5. Be sure to check and proofread the text on the page and make sure there are no typos or wrong times. 6. The final saved format is preferably TIF or PNG uncompressed format. 7. When posting posters, do not cover other people’s posters that have not expired. How to make supermarket promotional posters

6.18 is coming soon. Whether it is a shopping mall or an online store, some promotional labels will be designed to attract attention. The labels not only indicate the name, specification, model, etc. of the product, The original price, etc. are also marked with event prices to promote consumption. So, how to make this promotional label in barcode printing software? Next, let’s take a look at the specific steps:

1. Set the label background color

In barcode printing In the software, click the "Document Settings" button in the toolbar above the software to pop up the document settings dialog box. In Document Settings - Canvas, set the background color and check Print Background, and then click OK.

2. Set promotion tags

Header

Part

1). Click "Draw a rounded rectangle" on the left side of the software button, draw a rectangular box on the canvas, double-click the rectangular box, in Graphic Properties-Basic, set the fill type to "Solid", the background color to "Red", the line thickness to 0, and click OK.

2). Click the "Insert

Bitmap Picture

" button on the left side of the software, draw a bitmap object on the canvas, double-click the bitmap, and In Graphic Properties - Data Source, click the " " button, select "Manual Input" as the data object type, click "Browse" in the lower left corner, select the picture to be inserted - open for editing - OK.

3). Click the "Solid A" button on the left side of the software, draw an ordinary text object on the canvas, double-click the ordinary text, and in the graphics properties-data source, click the "Modify" button to delete the default Data, in the status box below, manually enter the information to be added, and click Add.

In the text, set the color to white and click OK.

4). Click the "Solid A" button on the left to draw ordinary text on the canvas. Double-click the ordinary text. In the graphic properties-data source, click the "Modify" button to delete the default data. Manually enter the information to be added in the status box below and click Edit.

In Basic, set the fill type to "Solid" and the background color to white. Set the alignment method under the "Text" window (such as left alignment, right alignment, center alignment, align both ends, etc.), here we take center alignment as an example.

3. Set the main content of the promotional product label

First refer to step 2-1), draw a rectangular box, and set the fill type to solid and background in "Graphic Properties-Data Source" The color is white, the line thickness is 0 and the rounded corners are 2, as shown in the figure:

Secondly, use an ordinary text object in the white rectangular box to add product attribute content: product name, model, specification, original price, activity price. The method of drawing ordinary text is as shown in 2-3), which will not be described in detail here.

To draw a line, click the "Line Segment" button on the left side of the software, hold down the shift key to draw a line on the canvas, as shown in the figure:

4. Set the activity price fill Bit

Click the "Draw" button in the toolbar above the software, select "Vector Text" in the drawing drop-down list, draw vector text in the rectangular box, double-click the vector text, and select "Graphic Properties - Text" In the window, set the font type to Haettenschweiler and the font size to 26. Then in "Data Source", click "Modify" to delete the default data. In the status box below, manually enter the information to be added and click Edit.

In Basic, set the fill background color to white, the thickness to 0.2, and click OK.

After setting up, you can click the "Print Preview" button in the toolbar above the software to see the preview effect. If there is no problem with the preview, you can connect to the printer for printing. How to make a supermarket poster in PS

The general steps of how to make a poster in PS

Promotional posters are widely used. Using PS software to make promotional posters is quick and convenient, and easy to modify later. Now I will talk about how to use PS to make a promotional poster

The first step is to create a new file in the PS software.

Open the ps software and create a new file according to the size you need. Generally set to A4 paper.

The second step is to create a sketch.

After creating the new file, create a new layer in Layers and name it Draft. Start ideating.

The third step is to draw a draft.

Outline the draft on the newly created layer, and you can modify it while drawing.

Four steps to complete the drawing.

Create a new layer on the draft layer, draw the original draft carefully based on the draft, and then create several new layers to color.

The fifth step is to type the text and adjust it into the final draft.

After the entire poster is drawn, add the text and slogan of the poster promotion. Finally, adjust the overall effect of the poster and you’re done. After cutting out the picture, use the move tool and drag it directly into your template. Just use ctrl and t to adjust the size. Then use the move tool to move the picture to a suitable position. The move tool is the first one on the toolbar, like a small mouse. that. If your template is layered, you can just drag the materials into it.

If not, then you have to redesign it according to your ideas. [Poster greeting card example]?

Do you have no PS foundation at all? That’s not something that can be solved in a few words. Cut out the image, copy and paste, and use ctrlT to change the size. Just know how to use PS