How to make your own placards

Materials: Inkjet cloth (size of design manuscript) wooden square strips (several)

Tools: hammer, pliers, hinges (two pieces), nails, manual nail gun, screwdriver .

1) Use software to design the manuscript with the slogan you want to embody.

2) Cut the wooden strips according to the size of the design manuscript.

3) Assemble herringbone placards.

1. First use a hammer and nails to complete the frame of the herringbone placard. Note that this operation is very important and the nails must be in place. Leave an extra 5cm at the bottom of the herringbone shape, and install the hinge at the top so that the placard can be retracted and spanned.

2. Staple the sprayed slogan onto the herringbone frame using a manual staple gun.

3. Cut the edges of the nailed inkjet cloth. Make its placard more beautiful.

Of course, this placard can also be made in stainless form. In short, the brand makes it according to its own requirements, and the materials are also chosen by itself.

Reference:/article/c35dbcb0c20d158917fcbc7b.html