How about a glass induction door? Maintenance of glass induction door

What is a glass induction door? What are the characteristics of glass induction doors? What is the maintenance method of glass induction door? Let's take a concrete look together ~

What is a glass induction door?

Glass induction door, as its name implies, is an effective combination of glass door and induction door, which belongs to both glass door and induction door. It is a systematic project to control the automatic opening of glass doors through induction signal input.

Glass induction doors are widely used in hotels, banks, office buildings, shopping malls and other places. Glass induction doors not only facilitate people's access, but also save energy, reduce noise, prevent wind and dust, making the whole building look very upscale.

Classification of glass induction doors:

Glass induction doors are divided into translation glass induction doors, 90-degree flat glass induction doors and arc glass induction doors. According to the door style, it is divided into: aluminum frame glass induction door, stainless steel frame glass induction door, frameless all-glass induction door and so on. According to the induction opening mode, it can be divided into microwave induction glass door, tactile glass door, infrared induction glass door and pedal induction glass door.

Is the glass induction door good?

It is a glass induction door started by the main starting system such as induction door machine, but the door leaf used is glass, so it is called glass induction door. The advantage of glass induction door is that it has a good decorative effect, and at the same time it is cold-proof and heat-insulating. Almost all the induction doors we use in large supermarkets or hotels are made of glass.

Maintenance of glass induction door;

Take a look: check whether there are any parts damaged in the glass induction door. Such as broken components, blackening and yellowing, firing pin, loose components, wrong wiring, etc. Some poor contact faults, especially after the power supply is energized, cause sparks due to poor contact at the fault point.

Listen 2: Listen to the sound of the glass induction door running. In the control system, electromagnetic relay is often used as the control device, which will produce a clear "click" sound when the relay contacts are switched. If it is silent or abnormal, it can be judged that the relay has a fault after it is determined that the relay drive electric appliance has no fault.

Three touches: touch the glass induction door element,

During the maintenance of glass induction doors, some parts are often touched by hand after being electrified. Such as voltage stabilizing IC, lightning protection tube, transformer, driving diode and other integrated devices. So as to feel whether the temperature is normal or not. If the temperature rises quickly and the temperature is high, and there is no short circuit fault in the circuit, it can be concluded that the equipment is defective. Four measurements: that is, the control circuit of the glass induction door is measured. Common methods include measuring voltage, measuring circuit resistance and measuring current. This is a comprehensive logical analysis method. According to the various data of measuring the electric telescopic door, the fault causes can be accurately found out and the equipment can be damaged.