How to send air cargo to the airport? How to send air cargo to the airport?

1. What should I do about air cargo consignment? 2. Air express delivery process 3. What is the method of international air cargo transportation? 4. If it is air transportation, what are the detailed steps? I urgently need to know, thank you! 5. Characteristics and operation methods of air logistics transportation Air cargo What about consignment?

If you check it in halfway by plane, it will be checked as baggage, but if it has a limited weight, the cost will be higher, but you can get it with your luggage when the plane lands. If you are not flying, you need to go to the air cargo department to handle it. There are also agents in the terminal, but the cost is very high. It is best to go to the cargo department yourself. If the weight is too heavy, don’t check in your luggage even if you fly, because it’s too expensive. You only need to go to the cargo department two hours before your flight takes off. The cargo will still be on the same plane with you, but this It takes two hours after the plane lands to get the goods, because they are not checked as luggage

Air express delivery process

Most domestic express delivery companies use centralized consignment, that is, delivery of goods To the agency, which will handle the consignment to the airline for air cargo transportation. Its workflow can be divided into the following steps.

(1 After receiving the air express, the receiving network will transport it to the distribution center in the respective region at the specified time.

(2 The originating distribution center will sort the goods corresponding to the destination, Determine the total shipment volume and the number of outer packages at the corresponding airport.

(3 The originating distribution center books space with the airline agent and hands the air cargo to the airline agent.

(4 The aviation agent receives the booking information from the originating distribution center and books the space with the airline according to the time limit required by the distribution center.

(5 After the airline approves the booking, the aviation agent will book the space on the corresponding flight. Submit the airport master form 3 hours before departure, and complete the security check 2 hours before departure.

(6 The aviation agent will hand over the corresponding airport information to the originating distribution center, and the originating distribution center will send it to the destination distribution center. Corresponding information.

(7 After the cargo arrives at the destination, it will be collected by the aviation agent temporarily.

(8 After the destination distribution center receives the forecast, it will be collected within 2 days after the aircraft lands. -Send someone to pick up the goods within 3 hours.

(9 After picking up the goods, the picker should first check whether the goods information is consistent with the information sent by the originating distribution center. If there is any discrepancy, it should be reported immediately.

(10 After the goods are verified to be correct, they will be sorted by the destination distribution center and then transported to various delivery points for delivery.

The entire work process is based on the location of the goods at the place of shipment and the place of receipt. The status is different and can be divided into two processes: outbound and inbound

1. Outbound

Outbound refers to the goods being registered and shipped from the temporary storage warehouse at the place of shipment to the destination. In this chapter, it refers to the process in which goods are sent from the originating distribution center to the destination distribution center.

The flow of goods during this process is: receipt, receipt scanning, 4 sorting, small items. Consolidate the package - load it out of the station - hand it over to the air agent and transfer the airline - issue a forecast

1. Scan the receipt

(1 After receiving the air express at the receiving site, it will be sent within the specified time.

(2 The outbound liaison officer of the originating distribution center pays real-time attention to the cargo information forecast sent by the outlet, and counts the cargo volume in the forecast, and sends it to the destination according to the standard routing plan. Airline agents reserve seats.

(3 The originating distribution center collects the express items submitted by the outlets and checks whether the weight, size and packaging of the express items meet the requirements for air transportation, and whether there are any contraband in the express items. If any substandard express is found, it should be returned to the outlet for sorting in time.

(4 Check whether the word "HK" is written with a large pen on the side of the express waybill. If not, write it again.< /p>

(5 Carry out human-station scanning for express packages that meet the requirements, and upload the number of scanned copies to the system (including the large package data of the package operation) for verification by the inbound pick-up person and the operator of the destination distribution center. .

2. Sorting packages

(1 The infield operator will sort the unloaded express items according to the destination outlet name. During sorting, all documents, Small items must be placed in the basket.

(2Consolidate small items sent to the same destination. Prepare container bags in advance according to routing container specifications, and indicate the destination name or code and block number on the corresponding container operation label.

(3 After scanning the container operation label number, start scanning the express items belonging to the container bag one by one, and put the scanned express items into the container bag, that is, container scanning. Container After filling, write the number of containers on the container operation label.

(4 Use a seal to tighten the bag mouth and the container operation label, and save the information just scanned in the scanner. .

(5 Sort the express parcels that have been packaged and scanned into designated areas, and prepare to be loaded and shipped out of the station.

3. Loading out of the station

" Scan one piece and load one piece into the truck. Be careful when loading and do not throw or throw heavy cargo, large cargo and container bags near the door of the carriage.

( 3. After loading all the outbound express items, immediately clean the operating area and check whether there are any missing express items. After confirming that there are no missing express items, the shuttle bus driver locks the carriage and the operator indicates the number of loaded items on the car seal (i.e., the large items in the car). and the total number of container packages, and then the vehicle will be sealed for shipment.

(4 The driver will leave the distribution center at the specified time, drive to the airport, and hand over the goods to the air agent.

(5 After the vehicle is dispatched, the scanner should immediately upload the data of the scanner gun just used to the system.

4. Submit it to the aviation agent

(1 The departure liaison officer shall Prepare a "Delivery Forecast" based on the cargo information, and the delivery driver will handle the delivery based on this forecast.

(2 The delivery driver must go to the designated shipping location to handle the delivery procedures within the specified time, including handover. Basic shipping data such as total number of pieces and weight, determine basic aviation information such as flight number, flight bill of lading number, and fill in the handover form in a standardized manner.

(3 The delivery driver must supervise that the goods are properly collected by the aviation agent and obtain the purpose. Station pick-up voucher.

(4 After completing the delivery, the delivery driver must return to the originating distribution center within the specified time and hand over all delivery-related documents to the outbound liaison officer.

p>

5. Issue forecast

(1 Departure liaison officer inquires and confirms the flight number, date, departure or arrival time of the loaded flight, and confirms the delivered goods

The actual dispatch situation.

(2 If there is an abnormality on the flight, the agent should be used to ensure the timely shipment of the goods. If there is a flight cancellation, the backup flight plan will be activated and the relevant departments will be notified in time so that they can make a good preparation. Prepare.

(3 After the goods are successfully dispatched, the departure liaison officer of the distribution center will issue a cargo information forecast in the system.

2. Port entry

< p>Port entry refers to the arrival of goods from the place of shipment to the temporary storage warehouse at the place of receipt. In this chapter, it refers to the process of goods moving from the origin distribution center to the destination distribution center.

The flow of goods during this process is: receiving forecasts - arranging drivers to pick up goods - scanning of goods at the station - unpacking and sorting - loading and exiting - sending to subordinate franchise points or secondary sites

1. Receive forecasts

(1 The inbound liaison officer of the destination distribution center pays attention to and receives cargo information forecasts from the origin distribution center in the system at any time.

(2 The inbound liaison officer organizes, categorizes and proofreads the forecast information and delivery orders according to the delivery points based on the forecast content of the distribution center system at the place of origin, and prepares the "Pick-up Forecast".< /p>

(3 The arrival liaison officer will hand over all delivery certificates and the "Delivery Advance Form" to the delivery clerk, and arrange for the corresponding delivery clerk to perform the delivery task.

(4 Inbound flights on the same day When abnormal situations such as cabin cancellations, delays, and cancellations occur, the arrival liaison officer must notify the flight departure station and copy these situations to relevant personnel such as quality control and customer service centers.

2. Arrangement. Picking up the goods

(1 The person who picks up the goods must go to the designated location to pick up the goods within the specified time according to the "Pickup Forecast".

(2 When picking up the goods, the cargo flight must be checked according to the "Pickup Forecast" No., bill of lading number, number of pieces, weight, outer packaging and other basic information, and check the quantity and integrity of the goods.

(3 If the goods are found to be damaged or lost, the delivery person must immediately negotiate with the carrier. Issue a certificate of damage or loss, and notify the inbound liaison officer of the distribution center; if there are abnormal situations such as flight pulls, delays, no orders or goods, orders but no goods, or goods but no orders during the pick-up process, the pick-up person must Feed back the information to the arrival liaison officer at the airport as soon as possible.

(4 After receiving the abnormal information feedback from the pick-up person, the inbound and outbound liaison officer must immediately feedback the abnormal situation to the flight department or branch of the origin distribution center to track and handle the abnormal situation. Report system abnormalities.

(5 After the deliveryman ensures that all goods have been loaded, he will close and lock the door, affix the car seal, and return to the distribution center within the specified time.

3. Inbound scanning

(1) After the picker picks up the goods and returns to the distribution center, he will hand over the goods to the scanner on site, count the total number of pieces, and the infield operator will unload the truck. If the goods are damaged during the pick-up process, For lost items, etc., the picker should present the abnormal cargo certificate issued by the airport freight department and other transportation units to the port entry liaison officer, who will file it and mark it in the system.

(2 When the shuttle bus enters the station, the infield. The operator goes to check whether the shuttle bus seal is complete, and asks the driver for the shuttle bus seal

The operator checks whether the blockade number and the number marked on the bus seal are consistent. If they are inconsistent, they should check with the driver in time .

(3 When unloading, the infield operator should check the quantity of goods and the integrity of the outer packaging according to the forecast content, and conduct inbound scanning of the express shipment. After unloading, it is necessary to enter the carriage for inspection to confirm. There is no missing express.

(4 The scanner must check whether the outer packaging of the express is intact while scanning the express. If it is damaged, weigh it on site and verify the weight marked on the waybill, and conduct a comprehensive inspection of the express. Take photos and register relevant information.

(5 After the vehicle is unloaded, check the number of express items scanned on the scanner gun and the quantity marked on the label and the quantity predicted by the system.

Whether the three are consistent, if not, the abnormality must be uploaded within 2 hours after entering the station and the detailed order number must be listed.

4. Unpacking and sorting

(within 1 hour). The field operator determines the priority of express sorting according to the difference in the departure time of the outlet shuttle, and performs initial sorting. During sorting, all documents and small items must be placed in the basket.

( 2 Confirm whether the container bag needs to be unpacked. Before unpacking, confirm whether the sealing of the container bag is complete, whether the sealing number matches, and whether the container bag is intact. If there is any abnormality, immediately check the quantity of goods in the bag and the packaging of the goods. , if the quantity is incorrect or the packaging is damaged, the operating unit of the previous link should be contacted immediately.

(3 The infield operator will turn out the inside of all opened container bags to confirm that they are completely empty. Empty. The container bags must be neatly folded after removing all identification labels and placed in the designated material area for storage.

(4 The infield operator will sort the express items into designated areas according to the distribution center sorting plan. In the area, the express shipments that are about to leave the port are consolidated, and the information is written on the labels to prepare for loading and departure.

5. Loading and departure

(1 Follow the instructions. For the sorting plan, load the outgoing express items onto the designated shuttle. Be careful when loading and do not throw or throw away. Heavy goods, large goods and container bags must be placed near the door of the carriage.

(2 If a shuttle is loaded with express items destined for multiple locations, the infield operator should use partitions or other auxiliary equipment to separate the express items to different destinations to facilitate the next step of the operation. Unit unloading.

(3 While loading, perform "outbound scanning" of the express items one by one and bag by bag. After loading, immediately clean up the operating area and check whether there are any missing express items.

(4 After confirming that no express items are missing, the shuttle driver locks the carriage, and the operator locks the carriage switch latch with a lock.

(5 The infield operator makes a shuttle seal and scans it Sign the number, record the number of packages loaded on the vehicle, the number of container bags, and the sealing number on the label, and give the label to the driver.

(6 The shuttle bus driver will leave the bus at the specified time. Dial the center and drive to the next distribution center or delivery network

6. Send to the lower-level franchise point or secondary site

(1 The lower-level franchise point or secondary site receives the forecast. , Arrange the shuttle bus to enter the station.

(2 The shuttle bus will enter the station, check the weight, and check the seal.

(3 Arrange for employees to unload and sort the goods.

What are the methods of international air cargo transportation?

International air cargo transportation methods

Large airlines have opened regular cargo flights on some routes, using All Cargo Carrier transportation.

Flight transportation features:

1. Due to fixed routes, fixed ports of call and regular flights, flights are often used for international cargo circulation. This method can safely and quickly reach various aerospace locations in the world.

2. It is convenient for the recipient and the shipper to know exactly the time of shipment and arrival of the goods, which is very important for the urgently needed commodities and fresh food in the market. It is very advantageous to transport rotten goods and valuable commodities.

3. Flight transportation is generally a mixed load of passengers and cargo. Therefore, the space is limited and large quantities of goods cannot be shipped in time. It often needs to be divided into installments and batches. Transportation. This is the shortcoming of flight transportation.

Chartered Carrier charter transportation can be divided into two categories: full charter and partial charter.

1. Full charter

(1) Chartering the entire aircraft means that the airline leases the entire aircraft to the charterer according to the conditions and fees agreed in advance with the lessor, and ships cargo from one or several airports to the destination.

(2 Charterers generally need to contact the airline one month before the cargo is shipped, so that the airline can arrange transportation and apply to the departure and landing airport and relevant government departments to handle the relevant procedures for transit or entry.

< p>(3. The cost of charter flights: Negotiable on a one-by-one basis, subject to changes in supply and demand in the international market. In principle, charter flight freight is charged at a fixed rate per flight kilometer, and is charged at 80% of the cost per flight kilometer. Therefore, when using chartered flights for large quantities of goods, it is necessary to ensure that the freight is carried both ways, so that the cost is relatively low. If only one way is used, the freight is relatively high.

2. Partial chartered flights

< p> (1. Several air cargo companies or shippers jointly charter an aircraft, or the airline sells the space of an aircraft to several air cargo companies to load cargo. It is a partial charter. It is used to transport less than one aircraft. The entire aircraft cabin is imitated, but the cargo volume is heavier.

(2 Comparison of charter flights and airliners

①The time is longer than that of airliners, although some charter flights have fixed schedules , often cannot take off on time due to other reasons;

② In order to protect the interests of their own airlines, governments of various countries often impose various restrictions on foreign airlines engaged in charter flights. For example, the scope of charter flights is relatively narrow, and the landing location is restricted. Restrictions. When you need to land at a location other than the designated location, you must apply to the relevant local government department for approval before landing (such as applying for entry, airspace passage and landing location.

(3 Advantages of Chartering< /p>

①Solve the problem of insufficient flight space.

②All goods are shipped by charter flights, saving time and multiple delivery procedures.

③Making up for the lack of direct flights Insufficient flights and no need to transfer.

④ Reduce cargo damage, cargo difference or loss.

⑤ Relieve flight tension during the peak season of air transport.

③ Solve the transportation problem of seafood and live animals.

Selected from Jincheng Global Booking Center

If it is transported by air, what are the detailed steps? I urgently need to know, thank you !

If it is domestic, please proceed as follows:

1. Handle consignment. After all foreign trade companies and industrial and trade enterprises have prepared the goods and received the incoming letter of credit and reviewed it (or revised it correctly), they can handle the consignment, that is, according to the relevant shipping terms in the letter of credit and contract, as well as the name of the goods, number of pieces, Fill in the shipping date, destination, etc. and provide relevant documents, and send it to the foreign shipping company as the basis for booking flights.

2. Arrange the cargo hold to receive the shipping bill and related documents. Afterwards, we will work with China Civil Aviation to arrange the space according to the loading principle, cargo nature, freight quantity, destination and other conditions, combined with the flight, and then China Civil Aviation will issue the air waybill.

3. Loading and loading. The foreign transportation company will pick up the goods from the warehouse on behalf of each foreign trade company or industrial and trade enterprise and send them to the airport according to the flight. The goods will be sent to the designated cabin for shipment based on the loading documents.

4. The shipment is completed. , the civil aviation company of China issues a general air waybill, and the foreign shipping company issues an air waybill. There are three originals and twelve copies of the air waybill.

There are three original copies, the first copy is given to the consignor, the second copy is kept by the shipping company, and the third copy goes with the goods and is given to the consignee. Twelve copies are used for customs declaration, financial settlement, foreign agency, transit distribution, etc.

5. Issue shipping notice. After the goods are loaded, a shipping notice can be issued to the buyer so that the other party can prepare payment, redeem the order, and receive the goods.

If exporting, take exporting from Shanghai as an example:

1. Consignor

1: Provide cargo information: product name, number of pieces, weight, box size Size, destination port and consignee's name, address, phone number, shipping time, consignor's name, phone number, and address.

Shanghai Customs has strict supervision on the export and import of powdered items and chemical products. For such items, laboratory reports are generally required to be made at the Shanghai Chemical Industry Research Institute.

2: Required customs declaration information:

A: List, contract, invoice, manual, verification form, electromechanical card, etc.

B: Fill in the customs declaration power of attorney and stamp it, as well as 1 copy of the blank letterhead for backup needs during the customs declaration process, and hand it over to the freight forwarder or customs broker entrusted with customs declaration for processing.

C: Confirm whether you have import and export rights and whether the product requires quotas.

D: Submit the above documents or other necessary documents to the freight forwarder or customs broker entrusted with customs declaration for processing according to the trade method.

3: Find a freight forwarder: Shippers are free to choose a freight forwarder, but they should choose a suitable agency company in terms of freight rates, services, freight forwarding strength and after-sales service.

4: Inquiry: Negotiate freight rates with the selected freight forwarding company. Air transportation price levels are divided into:

MN+45+1030501000< /p>

Each airline has different services and charges different rates to freight forwarders. Generally speaking, the higher the weight class, the more favorable the price. You can also apply for more favorable freight rates.

Two: Freight forwarding company

1: Letter of attorney: After the consignor and the freight forwarder determine the transportation price and service conditions, the freight forwarder will give the consignor a blank "goods" "Consignment Letter", the consignor will truthfully fill out this consignment letter and fax or return it to the freight forwarder.

2: Commodity inspection: The freight forwarder will check whether the content of the power of attorney is complete (if it is incomplete or non-standard, please add it to understand whether the goods are subject to commodity inspection, and assist in handling the goods that require commodity inspection.

3: Booking: The freight forwarder makes a booking with the airline based on the consignor's "letter of attorney" (the consignor can also designate the airline, and at the same time confirm the flight and related information with the customer.

< p>4: Receiving the goods:

A: The consignor delivers the goods by himself: The freight forwarder should fax the goods arrival diagram to the consignor, indicating the contact person, phone number, delivery address, time, etc. So that the goods can be put into the warehouse in a timely and accurate manner.

B: The freight forwarder receives the goods: The shipper needs to provide the freight forwarder with the specific receiving address, contact person, phone number, time and other relevant information to ensure that the goods are put into the warehouse in a timely manner. .

5: Transportation fee settlement: Both parties should confirm when not receiving the goods:

Prepayment: local fee payable: destination port guest pays fee

6: Tips:

A: Transportation methods: direct, air-air transfer, sea-air combined transportation

B: Freight composition: air freight (negotiated between the freight forwarder and the shipper. The freight rate shall prevail, customs declaration fee (250 yuan/ticket, for goods less than one ton, an additional 50 yuan/ticket production fee and 150 yuan/ticket customs declaration fee, fuel surcharge and war insurance (based on airline charges) will be charged. Accurate, generally respectively 1.0 yuan/kg, cargo station ground handling fee (0.3 yuan/kg, and other miscellaneous charges that may arise due to different goods.

Shanghai air freight forwarders have many cabin packages You can get a more favorable price with the company listed on the board. However, the price of air freight in Shanghai changes frequently, usually once a week. Moreover, September to the end of the year is the relatively peak season, and the shipping space is relatively tight.

Three: Airport/airline cargo terminal:

1: Tally: When the goods are delivered to the relevant cargo terminal, the freight forwarder will make a main label and sub-label based on the airline's waybill number, and affix them to on the goods to facilitate the identification of cargo owners, freight forwarders, cargo terminals, customs, airlines, commodity inspection, and consignees at the port of departure and port of destination.

2: Weighing: Deliver the labeled goods to the cargo station for security inspection, weighing, and measurement of cargo dimensions to calculate volumetric weight. After that, the cargo station will write the actual weight and volumetric weight of the entire cargo. "Acceptable for Transport", stamped with "Security Inspection Stamp", "Acceptable for Transport" and signature confirmation.

3: Ordering: The freight forwarder enters all the cargo data into the airline's waybill based on the "acceptable shipping document" at the cargo station.

4: Special handling: Due to the importance, danger, and shipping restrictions of the cargo (such as oversize, overweight, etc.), the cargo terminal will require representatives of the operating airlines to review and sign for explanation.

5: Tips: There are three major air cargo terminals in Shanghai:

China Eastern Airlines cargo terminal: handles China Eastern Airlines and China Southern Airlines. Cargo of international airlines.

Characteristics and operating methods of air logistics transportation

Characteristics and operating methods of air logistics transportation

Introduction: Although air cargo transportation It started late but developed rapidly. It is a modern mode of transportation. Air transportation has advantages that other transportation cannot match. Its transportation speed is fast, transportation distance is short, and transportation is safe and accurate. Here is what I bring to you about aviation. The characteristics and management methods of logistics transportation, I hope it will be helpful to you

Characteristics of air logistics transportation

(1 Disadvantages of air transportation:

Air transportation. The main disadvantages are that the cabin volume and load capacity of the aircraft are relatively small, and the transportation cost and freight are higher than that of ground transportation. Since flight is subject to certain restrictions on weather conditions, its normality and punctuality are affected. In addition, the advantage of air transportation is that it is fast in short-distance transportation. It is difficult to give full play to it.

(2 Advantages of air transportation:

1. It has high delivery speed. The market competition in today’s world is very fierce, the market is changing rapidly, and time cost is the need of enterprises. Among the important factors to consider, the higher transportation speed of air transportation has become a favorable factor for commodity competition in the current international market.

2. Low damage rate and good safety. The value of goods transported by air is high. , the ground operation process of air transportation is relatively strict, and the management system is relatively complete, which results in a low cargo damage rate and good safety.

3. Suitable for fresh and seasonal products. With the improvement of people's living standards, people now have high requirements for the freshness of food. Especially for those expensive products, the problem of freshness can only be achieved by air transportation from Dongguan to Shandong. Time requirements are very high, and transportation delays will cause the goods to lose their original value. Air transportation can ensure the freshness of the goods and help open up long-distance markets. For seasonal goods, air transportation can ensure that they are available before the sales season. It avoids the expenses caused by missing the season and causing the goods to be unsold.

4. It can simplify packaging and save packaging costs, and is not restricted by ground conditions. It is suitable for transporting small items, fresh goods, and seasonal goods. Although air transportation costs are higher, air transportation is beneficial for large and light goods, because the starting point for calculating freight is lower than sea transportation, and transportation is fast and punctual with the development of new technologies. and deepening, products are developing from thick, heavy, long, and large to thin, light, short, and small. Therefore, more and more products will be suitable for air transportation in the future, and the role of air transportation will become increasingly apparent.

Operation methods of air logistics transportation

Air transportation mainly includes flight transportation, charter transportation, centralized consignment and air express business.

1. Flight transportation

Refers to flights flying on fixed routes. It has fixed sailing times, routes and stopping terminals. Flight transportation is usually a combination of passenger and cargo aircraft. The cargo hold capacity is small and it is difficult to transport large quantities of goods. The freight rate is high. However, due to the fixed flight schedule, it is conducive to customers to arrange the delivery of fresh goods or urgently needed goods.

2. Charter transportation

When the batch of goods is large and flights cannot meet the transportation requirements, charter transportation is generally adopted, which is divided into two types: complete charter and partial charter.

Full aircraft charter means that an airline or charter agency rents the entire aircraft to the charterer according to the conditions and rates agreed in advance with the charterer, and ships cargo from one or several airports. Mode of transportation to designated destination. It is suitable for transporting bulk goods, and its freight is generally lower than that of airline transportation.

my country's civil aviation charter flights are charged at a fixed rate per kilometer flown, and the air mileage fee is 70% of the freight rate per kilometer flown.

Partial charter transportation refers to the chartering of an aircraft by several air freight forwarding companies or joint delivery companies, or the airline leasing the space of an aircraft to several air freight forwarding companies. It is suitable for goods that are less than the entire aircraft. The freight is lower than that of airliners, but the delivery time is longer than that of airliners.

3. Concentrated consignment

It means that the air freight forwarding company combines several batches of separately shipped goods into a whole batch to be consigned to the airline, fills out a master waybill, and ships to the same site. The air freight forwarding company entrusts the local freight forwarding agent to handle goods receipt, customs declaration, distribution and other services. The more goods are consigned in a centralized manner, the lower the freight paid, so it is more commonly used in international air transportation. Concentrated consignment is one of the important businesses of air freight forwarding.

4. Air express business

Companies that specialize in air express business cooperate with airlines to provide fast delivery services to cargo owners. The specific method is: after the company sends a special person to pick up the goods from the shipping office, send the goods to the airport in the fastest way, load them on the nearest flight, and then inform the foreign agent of the flight number, name of the goods, and consignee to pick up the goods. . After the flight arrives at the destination port, a dedicated person will pick up the goods and deliver them directly to the consignee after completing customs procedures. This method is called "desk-to-desk transportation" and is the fastest method of transportation, especially suitable for transporting various urgently needed items and documents.