How to drive a forklift well? Forklift driving steps and skills

Insert the key into the electric lock hole, release the handbrake and press the horn with your hand.

Give a driving signal and check the foot brake.

Start the forklift to enter the operation area.

The control method of bucket lifting is not the same as that of all kinds of vehicles tilting, so drivers must attach great importance to it at work to prevent safety accidents. When leaving, the driver must pull out the key and tighten the handbrake.

The forklift also has several joysticks, one is to lift the bucket and the other is to turn the bucket. Start loading soil with forward gear, level the ground with bucket, and move forward slowly. When the soil enters the bucket, use the operating lever to rotate the bucket mouth upward to load the soil into the bucket, then use the lifting lever to lift the bucket, put the gear into reverse gear, and then use the forward gear to slowly drive to the front of the car trunk! Attention! The trunk of the car should be placed horizontally, and the forklift bucket should be in the middle position directly above the trunk. Then turn the bucket mouth to the end with the turning lever, then turn the car upside down with the reverse gear, put down the bucket at a safe distance from the car and level the ground!

Loader is a kind of earthwork machinery, which is widely used in highway, railway, construction, hydropower, port, mine and other construction projects. Mainly used for bulk materials such as shovel, sand, lime and coal. , but also light shovel light mining materials and hard soil. Replacing different auxiliary working devices can also be used for bulldozing, lifting and loading and unloading wood and other materials.