What maintenance should I do before soaking in the car for high speed?

What maintenance should be done before high-speed car soaking;

1, debris piled up in the site.

There will be many floating objects or undulating weeds in stagnant water. Driving through water in rainy days may get stuck in the chassis of your car. These will adhere to the chassis for a long time, causing the chassis to rust and affecting the operation of automobile parts. Therefore, it should be removed in advance to avoid the danger of the car breaking down at any time. If there is too much rain in your city, you can armor your car to avoid these problems.

2. Check the air filter

The air filter can be said to be the door of the engine. Check the air filter and nearby pipes if they are wet. The wind engine may be flooded. Then it is necessary to find out the water inflow of the engine. If it is serious, it needs to be overhauled.

3. Check the dust cover of the universal joint ball cage in time.

This is a position that is easily overlooked, and the steering gear universal joint ball is wrapped in it. Once the accumulated water is not cleaned up in time, it will affect the direction assistance. It will also cause the direction to get stuck. If this happens during driving, it will be dangerous.

4. Water in the engine compartment

There are many connecting harnesses in the engine compartment. If the engine compartment is wet with water, it may cause a short circuit. Therefore, it should be dried in time to prevent short circuit.

5. Check the vent hole under the spare tire.

Generally, spare tires are stored at the bottom of the trunk. Water will seep into the car through the vent. Many people were ignored because the spare tire was lying on the ground floor, and it was not until the spare tire was used that it was not worth the candle.