How to solve the water leakage in the heating pipe at home?

1, and the solution is as follows: it is common and easy to solve the water leakage of general iron pipes due to sand holes for a long time. When the radiator has sand holes, it should be wrapped with a towel or rag first, and part of it should be put into the basin so as to introduce water leakage into the basin. If it is a bicycle inner tube, it can be cut into small pieces with a width of about 1cm and a length of about 50cm. Pull out the inner pipe strip at a distance of 3 cm from the trachoma, and then wrap it around the trachoma for 3 cm. After 3-5 days, trachoma will automatically rust to death.

2, serious water leakage, water leakage. The best way is to change PPR tube, which is corrosion-resistant and heat-resistant, with long service life and low price.

3, the pipeline is complex, it is difficult to change the pipe, and the water leakage area is large. Wrap the leaking place tightly with raw material tape for several times, and then wrap it with aluminum foil. If the sand hole is not big, it can also be solved.

4, you can use the sealant in the auto parts, you need to stop the heating pipe first; If there is no sealant, you can also use glass glue instead, but be careful not to use acidic glass glue, which is highly corrosive.

5. The above solutions are all under the condition that the water leakage is not serious. If the situation is serious, you must inform the relevant professionals to solve it at the first time. After all, leaking heating can have serious consequences.