What should I do if Xiaomi 6 falls into the water?

1. Xiaomi 6 fell into the water. What should I do?

First of all, let's talk about a few common problems: if water enters the speaker, the sound will be abnormal, but there will be no big problem. This will recover for a while.

Water enters the key: the volume key enters the water, and the sound increases or decreases abnormally. The power off button is flooded and can be restarted indefinitely.

When water enters the charging port, don't charge it for a short time, there is a risk of short circuit.

Internal water inflow: the battery on the motherboard screen is at risk of damage and reimbursement.

There are two treatment schemes for charging water, which are sent for repair, so that maintenance personnel can disassemble the machine to check that there is no residual water before using it.

Another way is to turn off the mobile phone and put it with the dryer. It is generally safer to use it after a period of time, 2~3 days. Commonly used desiccants such as calcium chloride.

Besides, the main problem I encountered: key water, if it is volume-critical water, the problem is not so serious. After turning off the phone and typing in the water, it will restart indefinitely, because the battery of the mobile phone is not easy to disassemble now. So it is more troublesome to handle.

The first step is to wipe the water around the mobile phone with a dry paper towel.

See if it can be repaired nearby. No, it's better to have a maintenance point. Otherwise, the mobile phone will take two or three days.

If you decide to handle it yourself: you need to prepare 95% anhydrous alcohol.

This is a shortcut because the moisture in the button is difficult to dry. Wipe the button with a cotton swab dipped in a small amount of alcohol (let a small amount of alcohol penetrate, not too much, otherwise it may damage the machine)

2. What should I do if Xiaomi 6 enters the water?

Never press the power button when the phone is flooded, then blow dry or take it to a repair shop to find a professional master.

Never press the power button when the phone is flooded. Never press the power button three times to say something important, or the line will be broken.

1: No matter what kind of water the mobile phone falls into, take out the battery of the mobile phone directly at the first time (instead of pressing the power off button)! 2. Use napkins or cotton balls and cotton swabs to suck all the water that can be dried outside, and you can't remove the dust.

3: If you fall into clean water, you can clean your mobile phone with anhydrous alcohol, because alcohol evaporates quickly, and the water on the circuit board can also evaporate together (provided you have anhydrous alcohol). If it falls into sewage, it should be cleaned immediately. Clean up the visible dirt first, and brush off the impurities attached to the component pins with a brush.

4. Swing the hair dryer from a distance with a hair dryer. (Be careful not to get too close or blow into one place for a long time)

5: Keep the mobile phone in a cool and dry place for 24 hours. If there is no hair dryer to dry the water, it is best to leave it for 48 hours or longer if you are not at ease.

6. Install a fully charged battery for trial operation. If it can't be turned on, it will be repaired.

There's another trick. Just blow it with a hair dryer. Pick up the paper and put it in the rice at home. The rice is very dry, which can make the mobile phone dry faster. Personal experience is expected to be adopted.

3. Xiaomi 6 fell into the water, what should I do?

First of all, let's talk about a few common problems: if water enters the speaker, the sound will be abnormal, but there will be no big problem.

This will recover for a while. Water enters the key: the volume key enters the water, and the sound increases or decreases abnormally.

The power off button is flooded and can be restarted indefinitely. When water enters the charging port, don't charge it for a short time, there is a risk of short circuit.

Internal water inflow: the battery on the motherboard screen is at risk of damage and reimbursement. There are two treatment schemes for charging water, which are sent for repair, so that maintenance personnel can disassemble the machine to check that there is no residual water before using it.

Another way is to turn off the mobile phone and put it with the dryer. It is generally safer to use it after a period of time, 2~3 days.

Commonly used desiccants such as calcium chloride. Besides, the main problem I encountered: key water, if it is volume-critical water, the problem is not so serious.

After turning off the phone and typing in the water, it will restart indefinitely, because the battery of the mobile phone is not easy to disassemble now. So it is more troublesome to handle.

The first step is to wipe the water around the mobile phone with a dry paper towel. See if it can be repaired nearby. No, it's better to have a maintenance point.

Otherwise, the mobile phone will take two or three days. If you decide to handle it yourself: you need to prepare 95% anhydrous alcohol.

This is a shortcut because the moisture in the button is difficult to dry. Wipe the button with a cotton swab dipped in a small amount of alcohol (let a small amount of alcohol penetrate, not too much, otherwise it may damage the machine).

4. What if Xiaomi's mobile phone falls into the water?

First, how to deal with Xiaomi's mobile phone falling into the water: 1. Please don't try to turn on the phone or press the power off button after the phone is flooded.

The SIM card slot should be removed as soon as possible. 2. Try to dry the water stains on the surface of the mobile phone, and then put the mobile phone in a strong water-absorbing environment (such as activated carbon, rice, moisture-proof agent) for 48 hours.

3. Try to start the machine after drying. If some functions are missing after normal startup, for example, the button light is not on, or the screen touch is abnormal, hardware failure may occur. Please contact customer service or bring the purchase invoice to the service outlets for maintenance.

4. If the mobile phone enters the liquid such as coffee, cola, milk, sea water, please send it to the service outlets for repair as soon as possible. 2. Precautions: 1. If the screen turns black, you can't press the power button to turn it on. Once the equipment works, it is easy to have a short circuit, causing damage to the motherboard.

2. Don't blow with the hot air of the hair dryer, and don't expose to the sun, which will lead to the deformation of the circuit board. 3. Do not start the test frequently within 24 hours after falling into the water. Put it in the shade for half a day, and install the battery for testing.

If the above steps can't solve the problem, don't try to disassemble the machine easily. It is best to consult an authorized repairer for handling. Extended data:

Steps to rescue the phone from falling into the water: Step 1: Salvage the phone from accidentally falling into the water, don't panic, and salvage it quickly.

The first thing to do is to get the mobile phone out of the water at the first time. If you stay one more minute, your mobile phone will be more at risk of breaking down. Step 2: Disassemble most mobile phones on the market. If the mobile phone cannot be disassembled, skip this step to step 3 immediately.

If it can be removed, please remove the battery immediately. Don't press any keys, don't turn off your phone, just take out the battery. If you operate the mobile phone at this time, it will easily lead to short circuit of internal components, and even further lead to component burning or battery explosion.

SIM card and SD memory card should also be taken out to avoid data loss. Step 3: Suck to remove the moisture on the surface of the mobile phone as soon as possible. It's simple. Wipe it quickly with a clean towel, and suck out the water in the gap of the mobile phone with the help of toilet paper, vacuum cleaner and other tools to ensure that the water will not flow into the charging port, earphone jack and so on.

Remember not to try to pour water out of the phone. The sockets in the mobile phone are not in the same direction. When throwing, the water on one side comes out, and the water on the other side may be thrown in. Step 4: Blow dry with the help of a hair dryer and other tools, pay attention to the "cold air" mode, and keep the distance between the hair dryer and the mobile phone during blowing to avoid damaging the mobile phone.

The main position of blowing is concentrated in the opening, such as charging port, earphone hole, receiver, speaker and so on. Followed by 24-48 hours of ventilation and drying.

In addition, pay attention to avoid exposure or contact heat of the mobile phone, so as not to damage it. The above methods are the emergency treatment methods after the mobile phone is flooded. If the mobile phone is flooded for a long time or seriously, it is best to send it to a professional maintenance center for repair at the first time. Don't wait until the mobile phone motherboard is seriously corroded by water for a long time, then it can't be repaired anymore.

5. How to deal with the inflow of Xiaomi 6?

Remove the back cover immediately after the phone enters the water. It is very important to remove the battery! Then take out the mobile phone card and memory card.

Then immediately dry the water on the outer surface. If you can disassemble the machine by yourself, you can disassemble it and blow it with a hair dryer. Ensure that the upper surface of the motherboard and screen is free of moisture. Blow it far away. Don't blow in one place alone.

At this time, you have to turn on the electric blanket, put the screen of the mobile phone face down on the electric blanket (without batteries), cover the quilt and air it for one night, and then you can start the test!

If you really can't open it, you can also bake it on an electric blanket all night!

If the above measures are ineffective, they can only be sent to a repair shop for repair!

6. Xiaomi's mobile phone fell into the water

Problem analysis: Xiaomi (without waterproof function) has a small number of mobile phones, and there is no watermark on the main screen, so corresponding measures should be taken immediately.

Suggested method: Turn off the machine immediately, and unplug the battery board (the built-in battery skips this step) and the SIM card. Remove moisture from the surface of the mobile phone, wipe the earphone hole and charging hole with a cotton swab or paper towel, plug the earphone hole and charging hole, and put it in rice 1 day. Rice has the function of absorbing water.

After taking it out, blow hot air into the earphone hole with a hair dryer, or put the mobile phone under the air outlet of the air conditioner. 2. The mobile phone is flooded heavily and seriously, and the screen is watermarked, so it can't be turned on.

Suggested method: Go to the nearby Xiaomi home or maintenance point for internal disassembly and cleaning. Note: Never turn on the mobile phone after it is flooded (only try to turn it on), otherwise it will lead to the risk of battery disconnection or motherboard burning. If you can't boot, the motherboard is broken.

7. What if Xiaomi's mobile phone falls into the water and the touch screen fails?

If the mobile phone accidentally gets water, you can try the following methods to deal with the mobile phone urgently to avoid secondary injury:

1. Please take the mobile phone to a dry and ventilated place as soon as possible, and dry the water stains on the surface of the mobile phone with a dry paper towel or towel.

2. If the phone is turned on, please press the power button to turn it off; If the phone is turned off, please don't try to turn it on.

3. please take out the SIM card and MicroSD card as soon as possible.

Please take the mobile phone to the after-sales department of the mobile phone brand as soon as possible to avoid unnecessary losses.

Warm reminder:

1, please don't shake or shake the phone frequently after the phone is flooded, so as to avoid water spreading inside the phone.

2. Please don't bake with a hair dryer or stove after entering the water, so as to avoid the liquid flowing into the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on normally after simple processing. However, the mobile phone is a precision electronic component, and there are hidden dangers after entering the water. It is recommended not to try to turn it on.

4. During after-sales maintenance, data may be lost. It is recommended to ask the staff how to back up the data.