Qi Jun Auto Forum Rear Spare Tire Replacement Toolbox

First of all, the car was dismantled, because it was dismantled once when the reversing radar was tossed last time, so I don't feel bad about it this time. I didn't take the picture of opening the drawer, and everyone knows it.

Remove the backing plate

Strip removal

Is this a screw or a guard near the back seat? Hehe, I forgot. ashamed

The first part is to loosen the place where wiring needs to be taken. The photos are not very detailed. Please forgive me.

Next, we will enter the installation phase. Let's take a look at the pit left by Nissan. To tell the truth, the space is a little small, just expand it a little. Then, there is no cable reserved for the lighter, so you can wire it yourself.

After enlarging the hole, plug in a cigarette lighter and take a picture at the back.

Another positive picture, by the way, this power supply can be plugged into a cigarette lighter to light a cigarette.

Next, screw on the nut to fix it.

Take a picture that you can see before and after.

Connect the power cord and wiring of the cigarette lighter, just the red one on your ass.

Let's look at the cut-off plug of the cigarette lighter power supply. At that time, I wished there was a socket in the car, just to plug it in. How perfect. After all, this is a fantasy. I have to accept the reality and say goodbye to my little plug.

Next, look at my wiring position and where I get the electricity.

Did you get a look at him? It's the pile of wires removed from under the fender next to the main driver's pedal. Oh, my God. The picture below shows the man looking for the fire line. To tell the truth, this job is quite tiring.

Finally found it. Start wiring. First of all, I installed the fuse in this position. In case something really happens, it is better to change it. Let's take a closer look at the structure of the fuse, which is used in cars.

The fuse is connected, followed by the wiring to the trunk.

You can see how to get out of this line, right? There's nothing wrong with taking the line. I think it is necessary.

The thread is used up. Put it back.

Give a close-up of the power supply of the cigarette lighter, haha, just nice. Cheap Dongri, you have a simple match, I'll change it to a better quality one, haha

The power supply of this trunk line is over. Insert the customer's navigation and try it. Hehe, the power indicator is on and charging.

By the way, show me the fixing piece of the left drawer I installed. In case someone wants to toss a left drawer, you can refer to it. Sometimes I really feel very considerate and can consider for everyone. It's really good. . . . . .

Ok, the next picture shows that the spare tire of the original car has been replaced with full-size tires and aluminum alloy wheels. This is for my friend, who is a small boss and has a Nissan 4S in Beijing. To be honest, it's like a gift. I won't go into details. Thanks again to my good buddy.

Above, first look at our original spare tire, not a full-size, black and ugly steel ring.

Remove the foam pad.

Remove the fixing screws.

The exciting moment has arrived. To tell the truth, it was still very uneasy to install it here at that time, because I was worried that the pad would not be installed, and it would be very depressed if it was installed. . . . Dangdang, aluminum alloy wheel full-size tire appeared in Yokohama.

Screw in the fixing screws.

Cover the foam pad.

The key part was that my heart beat involuntarily at that time, because some riders on the forum said that the tires were wide and the pads would be inappropriate. Some people say that it needs to be deflated. My new spare tire was inflated in a 4S shop, and it was full, 2.5. As a result, hahaha, it's perfect, perfect, and all four fixed bayonets can get stuck.

Humming a little song and continuing to pick up the others.

Haha, the left and right drawers are normal, and the push-pull is the same as before, so this time it is verified that it is no problem for Qi Jun to put the full-size spare tire in the spare tire warehouse at the back. Let's keep our feet on the ground in this respect in the future. Through this meaningful toss, I have two spare tires. How practical they are when I go to Tibet in the future.

Ok, this post is over, moderator, boss, I have to encourage you to add a fine. It's not easy for me A post in a few days is to replace the special rear fender imported from Germany, with a thickness of 6 mm, rogue hook and reverse current collector installation sticker. To tell the truth, the reverse current collector is installed, but I still use it myself first, and then I will talk about my own experience for your reference. Please look forward, please encourage me, thank you!