Let's talk about how to repair the toilet in Shui Piao.

1, the first thing to do is to buy a set of Shui Piao water valve, a water tank accessory, online or in a bathroom store. The general price is around 30 yuan, but it depends on the model of your own toilet. You should buy the same, otherwise the size is not suitable in many places. First, cut off the water supply and clean the water in the toilet tank. Different toilet forms have different replacement methods for toilet water tank Shui Piao. The replacement method of Shui Piao for conjoined toilet is introduced below. Take out the old water tank valve first, and then take out the upper part of the lower drainage kit to facilitate the replacement and installation steps.

2. Then separate the upper and lower parts. When the lower part of the screw is exposed, loosen the screw first, but do not take it out. There is an arc-shaped iron plate in the middle, which is placed outside the water tank and at the bottom. The bottom of the water valve is placed straight and concentric with the drainage hole.

3. Make the iron sheet at such an angle and tighten the screws. Return to the direction of removing the upper and lower parts and install the upper part of the sleeve. Remove the base and nut of the water inlet valve. Align the water inlet hole of the water tank and insert it into the lower end of the water inlet valve. Install the plastic washer and nut and tighten them. Here is the key, there must be gaskets, and they must be tightened to avoid water leakage. Anyway, you need to use all the accessories you send. Connect the tap water inlet pipe and tighten it.