What are the instrument lights of Chang 'an Star Card?

1, door status indicator lamp-an indicator lamp indicating whether the door is completely closed. When the door opens or fails to close, the corresponding indicator lights up, prompting the owner that the door is not closed properly and goes out after closing.

2. Parking indicator-This indicator lights up when the parking brake handle (i.e. handbrake) is pulled up. Put down the handbrake and the indicator light will go out automatically. On some models, this light will light up when the brake fluid is insufficient.

3. Battery indicator light-an indicator light showing the working state of the battery. Lights when the switch is turned on and goes out when the engine is started. If it doesn't light up or for a long time, please check the generator and circuit immediately.

4. Brake disc indicator light-indicator light showing brake disc wear. Under normal circumstances, this light goes out, and when it is on, it will prompt the owner to replace the faulty or worn transition brake pad in time, and then go out after it is repaired.

5. Oil indicator light-indicator light showing engine oil pressure. When this light is on, it means that the lubrication system is out of pressure and there may be leakage. At this time, the engine needs to be stopped immediately and checked.

6. Water temperature indicator-an indicator indicating that the engine coolant temperature is too high. When this light comes on and gives an alarm, stop immediately and turn off the engine, and continue driving after cooling to normal temperature.

7. Airbag indicator light-an indicator light showing the working state of the airbag. Turn on the switch and turn it off after about 3-4 seconds, indicating that the system is normal. If it is turned off or unchanged, it indicates that the system is faulty.

8.ABS indicator light-indicator light showing the relationship status of ABS system. Turn on the switch and turn it off after about 3-4 seconds, indicating that the system is normal. No light or long light indicates system failure. At this time, you can continue to drive at a low speed, but you should avoid sudden braking. 、

9. Engine self-test light-engine working status indicator light. Turn on the switch and turn it off after about 3-4 seconds. The engine is normal. No light or long light indicates that the engine is out of order and needs to be repaired in time.

10, fuel indicator-indicator indicating fuel shortage. When the light is on, it means that the fuel is about to run out. Under normal circumstances, the vehicle can still travel about 50 kilometers from the light on to the fuel exhaustion.

1 1, cleaning liquid indicator lamp-indicator lamp showing the amount of windshield cleaning liquid. If the cleaning liquid is almost used up, the light will light up, prompting the owner to add the cleaning liquid in time. After adding the cleaning liquid, the indicator light goes out.

12, electronic throttle indicator light-this kind of light is more common on Volkswagen models. When the vehicle starts self-inspection, the EPC light will light up for a few seconds, then go out, and there is a fault. This light is on, so it needs to be repaired in time.

13, front and rear fog lamp indicator-this indicator is used to display the working status of the front and rear fog lamps. When the front and rear fog lights are turned on, both lights are on. In the figure, the front fog lamp is displayed on the left and the rear fog lamp is displayed on the right. 14, turn signal-when the turn signal is on, the corresponding turn signal flashes at a certain frequency. Press the double flashing warning light button, the two lights will light up at the same time, and the indicator light will go out automatically after the turn signal goes out. 15, high beam indicator-indicates whether the headlights are in the high beam state. Under normal circumstances, the indicator light is off. Lights when the high beam is turned on and the instantaneous lighting function of the high beam is used. 16, seat belt indicator light-indicator light showing seat belt status. Depending on the model, the light will light up for a few seconds to give a prompt, or it will not go out until the seat belt is fastened, and some cars will also give an audible prompt. 17, O/D shift indicator light -O/D shift indicator light is used to display the working state of automatic shift O/D overdrive. When the O/D gear indicator flashes, it means that the O/D gear has been locked. 18, internal circulation indicator lamp-this indicator lamp is used to display the working state of the vehicle air conditioning system. Usually it's closed. When the inner circulation button is turned on and the vehicle turns off the outer circulation, the indicator light will automatically light up. 19. Width indicator-The width indicator is used to display the working status of the vehicle width indicator. Usually it is closed. Turn on the width indicator light, and the indicator light will light up immediately. 20.VSC indicator lamp-This indicator lamp is used to display the working state of vehicle VSC (Electronic Body Stability System). Most of them appear on Japanese cars. When this indicator light is on, it means that the VSC system has been shut down. 2 1, TCS indicator lamp-This indicator lamp is used to display the working state of TCS (traction control system) of the vehicle. Most of them appear on Japanese cars. When this indicator light is on, it means that the TCS system has been turned off. Summary: The lighting or flashing of different indicator lights represents the existence of different states of the vehicle. Correct recognition of these indicators will not make a big joke. It is also a compulsory basic course for learning to maintain your car!