Many places in the countryside are building houses with white foam. Is this kind of house long in service life?

In the past, houses built in rural areas were mostly brick-concrete structures, except for concrete, bricks were used the most. From laying foundations to building walls to sealing, they are all made of bricks. Later, the types of building materials became more and more abundant, and new patterns appeared. In some areas, white bubbles are very popular. Many people think it is not reliable to build a house with white foam, but from the following, why build a house with this foam, and does this house have a long service life? Is it reliable?

Short service life 1. Poor fire resistance. The characteristics of EPS ordinary module are similar to the white insulation board used on the external wall of previous buildings. The main material is foam, which is flammable. Some manufacturers say that their products are flame retardant, but in the end they are all used as building materials, and their fire resistance is much worse than that of bricks. So building a house with foam has poor fire resistance. If you build a house with this material, you must pay attention to fire prevention after completion. 2. Poor ventilation. Foam modules have high density and poor air permeability. Building a house with foam, if the ventilation system of the house is not normal, it is easy to form dull and damp.

Advantages 1, the first is to save time. In the past, villagers built houses with red bricks, and half of them came to help. It usually takes several months or half a year to build a factory, a coolie and a car. Building a house with this special white foam and preparing all kinds of materials can build a small villa in more than a month. 2. The cost is relatively low. The traditional brick-concrete structure has gone through a series of processes, such as building construction, brick moving, main wall construction, roof pouring and so on, which consumes a lot of material costs and labor costs. Compared with the traditional brick-concrete structure, the construction cost of foam residence is very low in material cost and labor cost, so the cost performance ratio is high and the construction cost can be reduced by 20%. 3. High seismic grade. The main material of EPS cavity module is foam, which is relatively light. After reinforcement fixing, concrete pouring and beating, the house is relatively strong and earthquake-resistant. Compared with the traditional brick-concrete structure, it has higher seismic grade and more advantages in earthquake resistance.

So in general, building a house with foam has its own advantages, but it also has many disadvantages, so the service life of this house ultimately depends on itself. If the pursuit of high-quality houses, then it is recommended to choose brick-concrete structure.