Gundam processing water outlet

Basically, it is possible. After leaving the water opening, use a pen knife to cut thinly, from the outside to the inside, from low to high. Be sure to cut it thinly and not all the way, otherwise the water opening will still appear. It is white (but I feel that the color will become darker after cutting with a pen knife). At the end of the cut, the middle will be raised. I usually cut the raised part directly, but many people use sandpaper to polish it off. For polishing, you can use 400~500 to deal with thicker nozzles, 1000 for reprocessing, and finally 2000 for finishing. It is best to add water for polishing (could water sandpaper be because water needs to be added...), first, processing Secondly, it prevents dust from flying around. I have never used polishing paste... Finally, you can use acrylic socks of poor quality to polish, and the effect is good/f?kz=576330568 See the 18th floor of this post ( I can’t afford Bandai... I only play TT and don’t despise it...)