Code problem

0000 operation completed successfully. 000 1 error function. 0002 The system cannot find the specified file. 0003 The system cannot find the specified path. 0004 The system cannot open the file. 0005 Access denied. 0006 The handle is invalid. 0007 The storage control block is corrupted. 0008 There is not enough storage space to execute this command. 0009 The storage control block address is invalid. 00 10 environment error. 00 1 1 An attempt was made to load the program in an incorrect format. 00 12 access code is invalid. 00 13 data is invalid. 00 14 does not have enough storage area available to complete the operation. 00 15 The system cannot find the specified drive. 00 16 directory cannot be deleted. 00 17 system cannot move files to other disk drives. 00 18 There are no other files. 00 19 media write protection. 0020 The system cannot find the specified device. 002 1 The device is not ready. 0022 The device does not recognize this command. 0023 Data error (cyclical redundancy check). The program issued a command, but the length of the command was wrong. 0025 The drive cannot find the specified area or track on the disk. 0026 Unable to access the specified disk or floppy disk. 0027 The drive cannot find the requested sector. 0028 printer is out of paper. 0029 The system cannot write to the specified device. 0030 The system cannot read the specified device. 003 1 The equipment connected to the system cannot operate normally. 0032 The file is being used by another process, so it cannot be accessed now. 0033 Another process has locked a part of this file, so it cannot be accessed now. The floppy disk in drive 0034 is incorrect. Please insert %2 (tag serial number: %3) into drive% 1. 0036 There are too many files to open * * *. 0038 has reached the end of the file. 0039 The disk is full. 0050 does not support this network request. 005 1 The remote computer cannot be used. A duplicate name exists in the 0052 network. 0053 The network path could not be found. 0054 The network is busy. 0055 The specified network resource or device is no longer available. 0056 The limit of network command has been reached. 0057 Network adapter error. 0058 The specified server cannot perform the requested operation. 0059 An unexpected error occurred in the network. The 0060 remote adapter is not compatible. 006 1 The printer queue is full. 0062 There is no space on the server to store files waiting to be printed. 0063 The file waiting to be printed has been deleted. 0064 The specified network name cannot be used. 0065 Access to the network is denied. 0066 The network resource type is wrong. 0067 The network name could not be found. 0068 The name limit of the local computer network adapter card has been exceeded. 0069 has exceeded the limit of network BIOS session. 0070 The remote server is paused or starting. 007 1 Unable to connect to this remote computer at this time because the number of connections to this computer has reached the upper limit. 0072 The specified printer or disk device has been paused. 0080 file exists. 0082 Unable to create directory or file. 0083 INT 24 failed. 0084 The storage area for processing this request is not available. 0085 The local device name is in use. 0086 The specified network password is incorrect. 0087 Parameter error. 0088 There is a write error in the network. 0089 The system cannot start other processes at this time. 0 100 cannot create other system flags. 0 10 1 is a special symbol belonging to other processes. The 0 102 flag has been set and cannot be closed. 0 103 cannot set the flag again. Cannot request a dedicated flag when 0 104 is interrupted. 0 105 The original ownership of this sign has been terminated. 0 106 Please insert a floppy disk into drive% 1. 0 107 The subsequent floppy disk was not inserted, and the program stopped. The 0 108 disk is being used or locked by another process. 0 109 pipeline has ended. 0 1 10 The system cannot open the specified device or file. 0 1 1 1 file name is too long. 0 1 12 is out of disk space. No other internal file identifiers are available for 0 1 13. The 0 1 14 target internal file identifier is incorrect. 0 1 17 This application is running an incorrect IOCTL call. 0 1 18 Confirm that the written switch parameter value is incorrect. The requested command is not supported by the system. 0 120 This function is not supported in this system. The 0 12 1 flag has timed out. 0 123 There is a syntax error in the file name, directory name or volume label. 0 124 system call layer error. The 0 125 disk has no volume label. 0 126 The specified module could not be found. 0 127 Unable to find the specified program. 0 128 has no subprocess to wait. Run in 0 129 mode. 0 130 attempted to operate with the file handle of the opened disk partition (instead of the original disk I/O). 0 13 1 An attempt was made to move the file pointer before the beginning of the file. 0 132 Unable to set the file pointer in the specified device or file. 0 133 For drives that contain connected drives, you cannot use the JOIN or SUBST command. 0 134 attempted to use the JOIN or SUBST command on a connected drive. 0 135 attempted to use the JOIN or SUBST command on a replaced drive. 0 136 The system tried to delete the connection of the unconnected drive. 0 137 The system tried to delete the replacement parts of the drives that have not been replaced. 0 138 The system tried to connect a drive to a directory under a connected drive. 0 139 The system tried to replace the drive with a directory under the replacement drive. The 0 140 system tried to connect the drive to the directory where the drive was replaced. 0 14 1 The system tried to replace the drive with a directory under the connected drive. 0 142 at this time, the system cannot run JOIN or SUBST. 0 143 The system cannot connect or replace the directory under the same drive. 0 144 This directory is not a subdirectory of the root directory. 0 145 directory is not empty. The path specified by 0 146 has already been used in the replacement. 0 147 There are not enough resources to execute this command. 0 148 The specified path cannot be used at this time. 0 149 tried to connect to or replace the drive directory, and the directory on the drive was the target directory of the last replacement. 0 150 configuration. SYS file does not specify system tracing information, or tracing is prohibited. The specified number of signal events for 0151dosmuxsemwait is incorrect. 0 152 DosMuxSemWait is not running; Too many flags are set. 0 153 DosMuxSemWait list is incorrect. 0 154 The volume label entered exceeds the label character length limit of the target file system. 0 155 Unable to create another thread. 0 156 receives the process rejection signal. 0 157 has abandoned this area, so it cannot be locked. 0 158 this area has been unlocked. 0 159 The thread identifier address is wrong. 0 160 The parameter string passed to DosExecPgm is wrong. The path specified by 0 16 1 is invalid. 0 162 signal has been suspended. 0 164 The system cannot create other threads. 0 167 cannot lock the range of the file. The resource requested by 0 170 is in use. The 0 173 lock request is not important for the cancellation area provided. The 0 174 file system does not support automatically changing the lock type. 0 180 The system detected the wrong area code. 0 182 The operating system cannot run% 1. 0 183 cannot create an existing file. The flag sent by 0 186 is incorrect. 0 187 The specified system signal name cannot be found. 0 188 The operating system cannot run% 1. 0 189 The operating system cannot run% 1. 0 190 The operating system cannot run% 1. 0 19 1 cannot run% 1 in Win32 mode. 0 192 The operating system cannot run% 1. 0 193% 1 is not a valid Win32 application. 0 194 The operating system cannot run% 1. 0 195 The operating system cannot run% 1. The operating system cannot run this application. 0 197 At present, the operating system cannot be configured to run this application. 0 198 The operating system cannot run% 1. The operating system cannot run this application. The 0200 code snippet should be less than 64K. 020 1 The operating system cannot run% 1. 0202 The operating system cannot run% 1. 0203 The system cannot find the entered environment option. The process in the 0205 command subtree has no signal handle. 0206 The file name or extension is too long. 0207 Ring 2 stack is in use. 0208 The global file name character * or? Incorrect, or the specified global file name contains too many characters. The signal sent by 0209 is incorrect. 02 10 could not set the signal processor. 02 12 area is locked and cannot be reallocated. 02 14 There are too many dynamic link modules attached to this program or dynamic link module. 02 15 cannot call the nested LoadModule. 02 16 image file% 1 is valid, but it is not applicable to the native type. 0230 The pipeline status is invalid. 023 1 All pipeline instances are busy. 0232 pipeline is closing. 0233 There is no process at the other end of the pipeline. More data is available. 0240 session cancelled. 0254 The specified extended attribute name is invalid. 0255 Extended attributes are inconsistent. 0258 Wait for the operation to become obsolete. No other data is available. 0266 The copy function cannot be used. 0267 The directory name is invalid. 0275 The extended attribute does not match the buffer. 0276 The extended properties file on the mounted file system is corrupted. 0277 The extended property sheet file is full. 0278 The specified extended property handle is invalid. 0282 The installed file system does not support extended attributes. 0288 An attempt was made to release a multi-channel synchronization signal that does not belong to the caller. 0298 signal has been sent too many times. 0299 Only partial ReadProcessMemory or WriteProcessMemory requests have been completed. 0300 The operation lock request was rejected. 030 1 The system received an invalid operation lock confirmation. 03 17 In the message file of %2, the system could not find the message text with message number 0x% 1. 0487 An attempt was made to access an invalid address. The result of 0534 operation exceeds 32 bits. 0535 There is a process at the other end of the pipeline. 0536 Wait for the process to open the other end of the pipeline. 0994 Access to extended properties is denied. 0995 I/O operation terminated abnormally due to thread exit or application requirements. 0996 Overlapping I/O events are not in the marked state. 0997 is processing overlapping I/O operations. 0998 Invalid access to memory location. 0999 An error occurred while performing an in-page operation.

If you are satisfied, please accept it.