What if the soymilk machine is broken? It's a Jiuyang brand.

Jiuyang soymilk machine is a very popular soymilk machine now. With the improvement of people's living standards, soymilk machine is not only a drink, but also a necessity for people's healthy life. But when using the soymilk machine, I found that some soymilk machines are not easy to use. What if something goes wrong? Here is a detailed introduction to what to do if Jiuyang Soymilk Machine is broken.

1, first confirm whether it is broken.

If you can't drink soy milk, you can blow it with a hair dryer. Generally speaking, there is something wrong with the soymilk machine itself. At this time, it is necessary to replace a new soymilk machine. But in this case, we need to pay attention to one thing: before replacing the new soymilk machine, we must first check whether there are some loose places in the soymilk machine and make sure that it can be replaced. Otherwise, as long as you put on a new soymilk machine, you can drink soymilk.

2. Power input of soybean milk machine

The reason of power input failure of soymilk machine is that the input voltage is unstable. At this time, the input voltage should be adjusted to ensure voltage stability. Be careful not to soak the beans in water for a while when using the soymilk machine. The power supply voltage of soymilk machine is affected by a series of factors: some soymilk machines do not need power supply voltage.

3. Is the power cord of the soymilk machine on the liner or on the machine shell?

The power cord of the soymilk machine should be left on the inner container, but if the power socket on the inner container is not connected properly or broken, the power cord of the soymilk machine should be on the outer container. Generally, the power cord of soybean milk machine is mostly on the inner container, which is used to dissipate heat and prevent leakage. If the heat dissipation problem is not considered, the power socket of the soymilk machine should be connected to the inner container; If water comes out when the power cord is at the back or bottom of the inner container, it will soak the power cord. Because water will wet the power cord or get an electric shock, it will cause short circuit and damage.

4. Check whether the power plug is plugged in. What is the reason?

Reason: When we use the soymilk machine, if the power plug is not plugged in or not, it is easy to have problems. When we use the soymilk machine, we should check whether the power plug is plugged in. If not, we should check how our soymilk machine works. Mainly to see if the machine of soymilk machine is too hot? If it is hot, turn it off and clean it, and pour all the water out of the machine. If it is not hot or plugged in incorrectly, it is necessary to check whether the power supply leaks, resulting in the non-working or abnormal sound of the soymilk machine.

5. Check whether the net cover of the soymilk machine inside is broken (or whether the terminals inside the net cover are broken).

At this time, tighten the small screw of the terminal, or loosen the small screw before connection. Or the terminal inside the terminal can be removed. If the terminal inside is not broken. You can polish it with a file or sandpaper. Then install a new terminal.