How to drive a manual transmission?

1. When driving a manual transmission car, first turn the key to start the car.

2. Then step on the left foot and clutch to the end. At the same time, release the handbrake after shifting the car gear from neutral to first gear.

3. When slowly lifting the left foot to release the clutch to the semi-linkage state, lightly step on the accelerator with the right foot to start the car and release the clutch.

4. After the car is driving at a constant speed, it moves forward and backward according to the speed. When moving forward and backward, it should cooperate with the clutch.

Extended data:

By switching different gear sets, the transmission ratio can be changed. As the key link of power distribution, gearbox must have two parts: power input shaft and power output shaft. Together with the gears that make up the gearbox, it is the most basic component of the manual gearbox. ?

The power input shaft is connected with the clutch, and the power transmitted from the clutch is directly transmitted to the gear set through the input shaft. The gear set consists of gears with different diameters, and the power transmission effect achieved by different transmission ratios is completely different. Shifting gears during normal driving means changing the transmission ratio.

Drivers can save fuel by choosing the right gear. The reason why the so-called mechanical transmission car saves fuel is because the mechanical transmission has high transmission efficiency and can reduce transmission loss. Driving a car with manual transmission requires a higher level of driving, so it is necessary to select gears reasonably and timely to really save fuel.

References:

Manual transmission car-Baidu encyclopedia