What are the planning requirements for safe and civilized construction plans for power transmission and transformation projects?

Article 1: In order to implement the policy of "safety first, prevention first", further improve the standardization level of safe and civilized construction of power transmission and transformation projects, standardize on-site civilized construction management, and ensure the safety and health of employees, Advocate green construction. Article 2 Each construction unit shall formulate a safe and civilized construction plan in accordance with the national laws and regulations on safety, health and environmental protection and the relevant provisions of the State Grid Corporation of China, and in conjunction with the specific conditions of power transmission and transformation project construction. Article 3 These requirements are applicable to guide and standardize the safe and civilized construction organization and management of power transmission and transformation project construction sites managed by provincial companies. The required terms are suitable for power transmission and transformation projects of 220kV and above. Power transmission and transformation projects below 220kV can be based on actual conditions. The reduced terms shall be implemented by reference. Article 4: With the working method of "strengthening the foundation, highlighting key points, moving the gateway forward, and improving management", we will create the goal of creating a first-class safe and civilized construction site for the construction of national power grid projects, and stipulate the overall layout of the site and measures for safe and civilized construction sites to ensure that Achieve project safety, health and environmental management goals. Article 5 The construction unit (project department) must make overall arrangements according to the safe and civilized construction plan, carefully carry out the specific design of safe and civilized construction of the construction site, and be responsible for the implementation. Article 6 The specific contents of safe and civilized construction plan planning (hereinafter referred to as planning) include: (1) Guidelines and goals for safe and civilized construction should be formulated based on the actual conditions of the project: 1. Safety, health and environmental management work guidelines; 2. Engineering projects Overall safety goals; 3. Project safety and civilized construction and environmental protection goals. (2) The planning should describe in detail the overall layout of safe and civilized construction (see Article 7 for details), including: 1. Organizational structure: It is required to attach an organizational structure diagram. 2. Project department layout: It is required to explain the location and location of the project department. Regional functional division of the project department 2.1 Office area: Attached is the floor plan of the office area 2.2 Office auxiliary area: Description of facilities and attached drawings 2.3 Living area: Description and attached drawings 2.4 On-site material station layout. (3) The plan should describe in detail the configuration of basic facilities for safe and civilized construction (see Article 8 for details), including: 1. Personal protective equipment: description and drawings 2. Special safety tools and equipment: description and drawings 3. Fire-fighting facilities : Description and attached picture 4, safety warning signs, and detailed diagrams for explanation. (4) Site layout, including: 1. Construction site layout requirements: See Articles 9 and 10 for wiring and substation requirements respectively. 2. Typical layout renderings of the construction site Article 7 Layout requirements for the office area and office auxiliary area of ??the project department: (1) Temporary buildings for offices and living areas during the construction of the substation project must be set up outside the surrounding walls, with zoning enclosures and isolation , the main colors of the temporary construction facilities of the entire institute (station) are unified and coordinated with the on-site environment, and the office area and living area are relatively independent. (2) Layout and office facilities of the office area and office auxiliary area of ??the construction project management department: 1. The project department name plate should be set up at the entrance of the office area, indicating the name of the project project and project department, power logo, etc. The wall next to it can be set up with enterprise management, Quality and safety policy slogans, etc. 2. The construction project department should set up "four signs and one picture" in the office area or construction area (project name sign, project management target sign, project construction management responsibility sign, safe and civilized construction discipline sign, and general construction layout plan) , you can also add the introduction of the main contractor, a bird's-eye view of the project, etc. 3. The construction project department should set up a conference room, lay out corporate culture propaganda boards, main job responsibilities, project overview, construction image schedule, etc., and integrate the safe and civilized construction organization chart, safe and civilized construction environment management goals and policies, safe and civilized construction positions Responsibility system, project construction progress bar chart, main rules and regulations, etc. are set up on the wall. 4. The conference room should be equipped with multimedia equipment, projection, air conditioning and other equipment. 5. The office should be managed in a standardized manner, with one desk per person and divided offices. It should be equipped with fixed telephones, fax machines, photocopiers, computers, air conditioners and other office equipment. 6. Set up offices according to responsibilities and functions, mainly including project manager office, chief engineering office, engineering department, security department, quality inspection department, general office, conference room, information room, etc. In addition, there should be a dedicated office for supervision.

(4) Safety warning signs: See Articles 9 and 10 for details. Article 9 Requirements for safe and civilized construction site layout at the substation site (1) Fence: Before the official start of the project, the substation fence should be built in advance to facilitate closed management. (2) Construction site: 1. Arrange the process reasonably and the construction site should be kept flat from beginning to end. The earth excavated from foundation pits and trenches should be cleared and transported in a timely manner (it can be leveled on the spot if conditions permit), and should be prevented from being spilled during transportation. 2. The floors of concrete mixing stations, sand and gravel storage yards, warehouses, material processing yards, and parking lots should all be hardened. 3. The equipment and material storage site should be solid, flat, and free of water on the ground. (3) Roads: 1. The construction of the substation must first build the main concrete road into the station and the main ring concrete road in the area. The concrete roads in the area can be formed by one-time pouring, or the construction layer can be poured first, and the handover layer can be poured before the project is completed. Drainage slopes should be formed on both sides of the road. 2. Temporary roads built according to construction needs can use mud and stone hardened pavement. The hardened width of sidewalks in office areas, living areas, and material processing plants should not be less than 1 meter. 3. After the road concrete surface layer is poured, the finished product or semi-finished product must be effectively protected: it is strictly prohibited to mix mortar (concrete) or stack various materials on the road surface, it is strictly prohibited to directly support the crane on the road surface, and it is strictly prohibited to perform welding operations directly on the road surface. It is strictly prohibited to use crowbars to move poles, structures, etc. on the road surface, and it is strictly prohibited to drive oil-spill vehicles or crawler cranes on the finished road surface. Clean the road surface regularly to ensure it is clean and tidy. 4. Power cords temporarily crossing the road must pass through steel pipes (red and white color code). 5. Road signs: National standard road signs, traffic signs, speed limit signs and regional police signs should be set up on both sides of the main road entering the substation. Construction area signs should be set up on roads within the substation. (4) Drainage ditches: Drainage ditches should be built in advance on both sides of the road and maintained regularly to ensure that the drainage system of the entire institute and station area must remain smooth.

For more information about engineering/service/purchasing tender document writing and production to improve the bid winning rate, you can click on the official website customer service at the bottom for free consultation: /#/?source=bdzd