Precautions for car film pasting

What are the precautions after car film pasting?

Don't lift the window at will within 3 days in summer and 7 days in winter after car painting. Because the car glass just pasted with the film is tight, the edge of the film is easy to roll up and tilt during the lifting of the window, which damages the film.

Generally speaking,

Please note the following points:

1, don't lift the window for three days after the car is pasted, and it can last for a few more days if it rains on cloudy days.

2. It is forbidden to turn on the air conditioner and blow the front gear within ten days after pasting the car.

3. If there is a cloud between the car film and the glass, don't worry about this situation. There is still residual moisture between the newly pasted car film and the glass for a certain period of time. It is recommended to park the car in the sun for a few days, which will gradually disappear within a week.

4. After the film is completely dried, clean the glass and gently wipe it with deerskin or special car towel.

5, don't use suction cups or any paste products, paste on the car film, in order to prevent the car film from falling off and generating bubbles.

6. Don't push the edge of the film away with nails or sharp substances, so as to avoid substances that affect the appearance, such as gray spots, from entering.

7. Do not use brushes, dry towels, etc. Wipe the heat insulation film on the surface of the window to avoid scratching the film.

What should I pay attention to when putting a solar film on a car?

Precautions:

1. Avoid lifting the window within three days after pasting the car film;

2. Don't wash the car within three days;

3. Vehicles with skylights are driving within three days, especially at high speed. Don't open the skylight;

4. After shooting in winter, it is recommended not to lift the window and wash the car for a week. It takes about a month for the front and rear gears to dry completely.

5. If the edge of the membrane bubbles, it should be repaired at the construction site within 24 hours. If it exceeds the time, it will be dealt with. Because the glue around the bubble has dried up, the periphery of the membrane can no longer move, and creases will definitely appear during treatment.

6. It is forbidden to stick the super adhesive label directly on the film within one month after sticking the film, so as not to cause the separation between the film and the glass.

7. Car stickers should also understand the car inspection policies of various cities. For example, in some cities, if the visible light perspective ratio between the windshield used in the driver's visual area and the glass other than the windshield is less than 70%, the annual inspection will not pass. When sticking the car film, the triangle area of the front window cannot be stuck, otherwise it will affect the normal annual inspection of the vehicle.

What does the car film say to pay attention to?

1. Before pasting, check whether the window glass is installed in good condition and whether the car glass is complete, so as to ensure the normal operation of subsequent pasting. Before pasting the film, the necessary parts in the car must be covered to prevent liquid from infiltrating.

2. Clean the inner and outer surfaces of the window before pasting the film. This is mainly to prevent dirt or other construction quality problems between the thermal insulation film and the window glass after pasting, and to ensure that the film can be combined with the glass.

3. Don't lift the window within 3 days after sticking the film.

4. Do not clean the heat insulation film within one week after pasting, and turn on the defogging line switch.

5. Do not clean the surface of the membrane with alcohol or ammonia solution.

6. If bubbles appear after pasting, they must be treated in the construction workshop within 24 hours.

7. Don't let the air conditioner blow against the membrane, so as to avoid serious heat expansion and cold contraction.

Extended data:

1, professional automobile film should use special film cleaning solution and installation solution, and dilute with pure water, so that the film and glass can achieve the maximum adhesive strength, and will not cause defects such as edge warping and delamination, and achieve long-term quality assurance effect.

2. The car must be free of defects and sundries after film pasting, so professional installation must be carried out in a dust-free film pasting room! The clean room not only has a closed glass door isolated from the outside, but also has a water mist nozzle and air conditioner to realize air dust removal, and the ground has a drainage ditch and special paint to further realize dust removal.

References:

Baidu encyclopedia-car window film

What are the precautions for car film?

Matters needing attention after the construction of automobile window film:

1, be sure to go to the store for re-inspection! Re-examination! Re-examination!

Many people think that the acceptance after filming is the last process, but in fact, the re-inspection after one week is the last step. First of all, some minor problems will not appear for a week; Secondly, some films need edge sealing after one week. For professional construction shops, the membrane construction and final delivery can only be truly completed after re-inspection and confirmation of OK.

2. If the edge of the film is blistered, please do not handle it yourself, but go to the store for repair within 24 hours.

Regular construction shops will also provide perfect after-sales service. If problems are found after filming, contact the construction store for handling. And there are professional tools with professional film pasting techniques. If you do it yourself, not only can you not achieve the desired effect, but you may also cause more problems. And these problems caused by human factors are not recognized in the later after-sales service.

3. Do not lift the window for 3-7 days after sticking the film, so as not to damage the film.

4. If some brands' top-quality products are posted, such as Dragon Film AVS70 or Gu Wei V40 and V70 films, please come to the store for edge sealing within 1-2 weeks!

In order to achieve higher heat insulation effect, some automobile heat insulation films are embedded with metal components, and the edges need to be sealed to prevent contact with air and oxidation. After construction, the water vapor between the film and the glass needs to evaporate naturally, which is not suitable for immediate edge sealing, and it is ideal to seal the edge after one week.

5. Don't start the anti-fog heating wire 1 month after sticking the film.

Within a week after pasting, pasting and glass are still not obedient. At this time, when heating and defogging are turned on, bubbles will be generated around the heating wire between the glass and the film, which cannot be repaired.

6. After sticking the film, stick the film between the glasses. Please don't worry if there is mist or water droplets! This is an inevitable phenomenon in the drying process, and it disappears naturally after 8- 10 weeks of sun irradiation.

7, 2-3 months after the film, please don't suck suction cups and things like that on the film.

Matters needing attention after construction of automobile paint protective film:

1. You can't wash the car within 1 month after pasting.

At this point, the paint film is not completely attached to the paint surface. When washing the car, the impact of the high-pressure water gun can easily tilt the edge impact, or even partially fall off. /kloc-After 0/month, do not over-flush the corner gap with a high-pressure water gun. Invisible car clothes imitate the hydrophobic characteristics of lotus leaves, and are resistant to oil and dirt, which makes the subsequent car washing very simple and does not require intensive cleaning with high-pressure water guns.

2. After 7- 15 is installed, it should be rechecked in the store.

The edge of the car body is more complicated. Before it is firm, the complicated interior environment may cause the edge of the invisible car to tilt or loosen, which is not easy to detect. Professional construction shops will generally carefully re-examine the whole vehicle for customers after the vehicle condition is stable, and carry out secondary trimming work at the edge position.

3. If bubbles appear within 1-2 months after sticking the film, do not handle them by yourself.

For a small amount of bubbles, it is a normal phenomenon of natural evaporation of water. However, due to the large clothing area and high construction difficulty, it is not recommended for the owner to solve it by himself. You can contact the construction shop and let the professional film pasting master handle it.

Precautions for film pasting?

1. Clean the car; 2. Paste the sample and select the film; 3. Check the condition of the car; 4. Dust removal and humidification; 6. protect cars; 7. Check and cut the film; 8. Clean the glass; 9. Setting baking film; 10. Check and post; 1 1. The delivery process is not omnipotent, but it is absolutely not advisable to have a good process or not to implement it. It is difficult to make the film absolutely dust-free, but there are ways to reduce the dust particles adhering to the film as much as possible, which need to be done in the following aspects: First, clean the car body before filming to prevent the car body from carrying dry dust into the construction workshop; The second is to construct in a closed workshop. When the vehicle enters the workshop, it needs to be sprayed to reduce the dust particles suspended in the air. The third is to clean the glass as much as possible to reduce dust particles on the glass; The fourth is to remove dust locally before tearing the film, including your hair and clothes, to avoid electrostatic adsorption of dust; The fifth is to master the skills of receiving water to avoid dust particles at the corners of the glass, especially at the lower edge, from entering the film due to vacuum siphon.

Car window film matters needing attention daquan

When summer comes, many car owners will choose to film their cars.

Precautions for car film pasting

Don't be greedy and cheap.

Cheap car film may be fake. Regular film products have the characteristics just mentioned, but pay more attention to which effect. Fake goods may not bring you these functions, but may also bring harm.

Many car owners believe in the film given by the 4s shop, but it should be noted that the film given by the 4s shop may also be fake, so car owners must pay attention to distinguish when purchasing.

Pay attention to the film material

There are many kinds of thin films, such as dyed films, metal films and nano-ceramic films. Each film has different characteristics. Usually, we use nano-ceramic membrane, which is more common and cost-effective, but we should pay attention to the store's shoddy. What is better is different kinds of metal films, which are available in some high-quality brands. The transparency, heat insulation effect and thickness are different, and the price is also very different. Car owners can only choose according to their own needs and budgets.

Choose a reliable store

Construction is an important factor in film pasting, and reliable workers are also very important. Otherwise, the film posted is either dusty or blistering, and even the best car film is a waste. In addition, film pasting must be carried out in a dust-free workshop, and construction can only be carried out in roadside stalls at will, which can only be an act of safeguarding rights that we regret. Good construction is a strong guarantee of film pasting effect, so it is very necessary to choose a professional construction shop.

Be careful when choosing movies.

The common metal film will have signal shielding. When driving, our mobile phone signal is not good, and the navigation can't find the satellite, which may be caused by the film. Dark film should also be avoided as much as possible, which will seriously affect the driving observation line of sight, and the rear car can't observe the road ahead through your window. Finally, the mirror mask, which has light pollution, will affect the safety of other drivers and is unsightly.

Car film brand ranking

1, Johnson Johnson

Johnson Company of the United States is an advocate and an important member of the World Film Association. Since 1950s, we have been committed to developing ultra-safe and ultra-designed automobile explosion-proof membranes. Its annual output is increasing at an alarming rate of 50%, and the quality of automobile explosion-proof film has always been in the leading position in the world.

2. Ray-Ban

All products of Ray-Ban are made by two thermal insulation film factories in the United States and Japan, and insist on using thermal insulation films imported from the United States and Japan. In terms of science and technology, Ray-Ban's LB-895 and LB-9 15 do not use metal as thermal insulation materials, so they will not block the reception of optical signals such as mobile phones, car remote controllers and satellite navigation at all, and achieve high thermal insulation without metal components, with low internal reflectivity.

3. Quantum

Quantum is the top brand of thermal insulation and explosion-proof film in the world and the global leader of magnetron sputtering film. It has won the International AIMCAL Science and Technology Award twice in a row and is one of the manufacturers recognized by the International Window Film Association. Quantum film thermal insulation products are different from other products. Since the birth of the brand, a series of products have been developed based on thermal insulation film and combined with the actual market situation, including high-end and mid-end markets, and the competition in the automotive thermal insulation film market is more intense.

4. Shangjia

Shangjia Explosion-proof Film Factory is a major member of IWFA International Window Film Association, with advanced film dyeing, vacuum aluminum plating, magnetron sputtering coating, scratch-resistant coating, adhesive interlayer, spectral particle screening and other production technologies. This brand belongs to the middle range. Because it entered the market late, its popularity is not very high, but its effect is good and its scratch resistance is also good.

5, 3 meters

Headquartered in St. Paul, Minnesota, USA, 3M is a world-renowned multinational company with diversified products. 3M company is famous for its innovation. There are many kinds of automobile explosion-proof membrane products. Over the past century, the products of 3M automobile explosion-proof membrane have penetrated into people's lives, from household goods to medical supplies, from transportation and construction to commerce, education, electronics, communication and other fields. In modern society, every day, 50% people in the world directly or indirectly contact with the explosion-proof membrane products of 3M automobiles.

6, amber optics HUPEROPTIK

HUPEROPTIK Amber Optics is the brand of Eastman Chemical Company, which is the world's leading specialty chemical company. Nano-ceramic thermal insulation film was born in 2000, which is the first and only multilayer nano-ceramic thermal insulation film in the world. It is widely used in navigation, construction and automobile markets, bringing the window film industry into a new era.

7. Dragon Film Dragon Film

Dragon film dragon film belongs to Eastman chemical industry, which has obvious scratch-proof function. Glass-treated film is a very thin film made of polyester and metallized coating through adhesive. This film is installed on the glass surface, providing excellent sun protection performance. Dragon film has a very solid structure, has the best scratch-proof function in the industry, and is backed by the best guarantee system.

8. Gu Wei v KOOL.

The manufacturer of V-KOOL insulation film is Hua Shao Technology Company located in Silicon Valley, USA. The unique spectrum selection technology has enabled Gu Wei products to win an absolute leading market position in the industry. Its thermal insulation technology was selected as "one of the top 100 inventions in the Millennium" by Popular Science 1999, the world's largest scientific magazine.

9. Kangdexin KDX

Kangdexin KDX is the largest manufacturer of precoated film in China, and it is also the first enterprise with independent intellectual property rights engaged in precoated technology research and development and precoated film production in China. The core competitiveness of Kangdexin window film is one of the manufacturers recognized by the members of the International Window Film Association, and the product quality has reached the international advanced level.

10, light-induced SUNAWE

Light sense is by far the top thermal insulation collocation of Rolls-Royce, Lincoln, Mercedes-Benz, BMW, Audi, Land Rover, Jaguar and other luxury cars. In addition to products with excellent international quality, Optical Sense also provides customers with high-end supporting services, allowing car owners to feel a unique exclusive experience. Light lure is aimed at more than 400,000 luxury models, with the highest product price and the best thermal insulation performance in the industry, but ordinary car owners may not be able to accept such a high price.

Usage skills of car film

Decide on movies and weather.

As the saying goes, "Go out and watch the weather." We go out to do business, sail, travel, do business, shop and so on. These are closely related to the change of weather. It depends on the weather to shoot your car. Cloudy days and after rain are the best weather for filming. Because on cloudy days and after rain, the air is humid and there is little suspended matter, at this time the film will not affect the appearance because of impurities. Many car owners know that sticking explosion-proof film should go to a decoration shop with indoor film pasting conditions. Professional decoration shops will keep indoor humidity properly before pasting to avoid sand, bubbles and scratches in the film caused by dust. But most car owners may not know that the air humidity is higher on cloudy days and after rain, static electricity is reduced, and indoor and outdoor dust is also significantly reduced. This is the best time to shoot. Need to be reminded, do not shoot in dusty weather and environment.

Buy a car film to distinguish authenticity.

At present, there are many kinds of car films on the market, and the quality is mixed. If amateur car owners are not careful, they will inevitably be deceived and spend a high price to buy inferior films or fakes. As we all know, inferior film not only endangers driving safety, but also easily causes hidden dangers of glass, and even affects the health of drivers and passengers. When the owner decides to film his car, he must pay attention to distinguish the authenticity of the explosion-proof film from the following points.

1, clarity. The transmittance of high-quality films can be as high as 90%, and objects 6 meters away can be seen clearly at night regardless of color depth, while inferior films will have a foggy feeling;

2, feel. Authentic film feels thick and smooth, while inferior film feels thin and brittle, which is easy to wrinkle;

3. color. The pigment of high-quality film is evenly mixed into the film, which is durable and not easy to change color, while the color of inferior film is in adhesive. After the lining of the car film is torn, it will fade when scratched with nails.

4. Taste. The residual solvent benzene in inferior film adhesive layer has high content and peculiar smell, which will seriously endanger the health of the owner;

5, bubbles. When the plastic lining of car film is torn and reassembled, the inferior film will bubble, while the high-quality film will be intact after reassembly;

6. Shelf life. Generally, the films produced by regular manufacturers have a long shelf life, usually 5 years.

Movie store, official request.

Good products are important, but the process of film pasting can not be ignored. It is very important to choose a store with high reputation and good service. Generally, regular automobile beauty shops are equipped with professional film pasting workshops, because the film pasting process must be relatively dust-free and cool. Car owners should not choose some roadside shops or even some unreliable black shops to save money, which will not only cause the film quality to fail to meet the requirements, but also damage the car body and car glass, which is not worth the candle. Because the film is most afraid of dust and gravel, it is difficult for street work to clean the environment.

Before pasting the film, the owner can browse around the decoration shop to see if the shop is clean and the floor is clean. Is there an authorization certificate from the manufacturer of explosion-proof solar film? Does the service level of the film pasting technician pass the standard? Is there a special membrane construction workshop? Is there spray dust suppression equipment in the workshop? If a car is being painted, can we also observe whether the construction process and construction technology are smooth and rigorous?

Preparation is very important.

As the saying goes, everything should be considered comprehensively first. Before sticking the film, protect the facilities inside the car and cover the seat and instrument panel with plastic covers. When pasting the film, avoid using lubricants that are easy to fade the film, and don't paste the film in direct sunlight, because the film pasted in this way is easy to wrinkle and blister, which greatly affects the image and beauty of the car.

Front and rear windshields should be posted.

It is best to ask the store to stick the front and rear windshields together, not to cut them, but to stick them as a whole, otherwise the explosion-proof performance will be lost and the appearance will be affected. How does professional technology do it? The rear windshield of a car has a curvature, and the glass of imported cars is bigger, so the curvature is bigger. The professional technology is to cut the whole solar film according to the size of the rear windshield, bake the film outside the rear windshield into the same arc as the rear windshield with special tools and hot air guns, and then stick it in the car.

Be careful when accepting it.

After the film is pasted all over the car, the car is mainly sitting in the car to observe whether the color is uniform, whether there are bubbles, whether there are too many gravel, and whether the film affects the line of sight from all angles. You can also lower the window to see if the knife for cutting the diaphragm is neat and round, and if the technological edge on the left is about the same size.

Ask for a "quality assurance card" and keep the documents.

As the saying goes, "there is nothing in words", if the buyer and the seller reach an oral agreement initially without written documents, it will cause inconvenience to the investigation of future responsibilities. When delivering the car, the owner must ask the store for a formal product quality assurance card. Some brands of film have a film warranty card, remember to ask the merchant for it. If you don't have a warranty card, you must also keep all kinds of documents and invoices so that you can use them as evidence to find the "theory" of the merchant when you have problems.

After pasting, protect it carefully.

After the car film is finished, pay attention to the side window not to be opened within 24 hours in summer and 48 hours in winter, and don't push the edge of the film with nails or sharp objects to avoid dirt from entering. If there are bubbles, they should be treated in a professional automobile beauty maintenance shop within 24 hours.

In two weeks, it can be cleaned.

After 2~3 weeks, the film can be cleaned, and soft objects such as lint-free cloth should be wiped with water dipped in detergent. Be careful not to insert sand or sharp particles to avoid scratching the surface of the film, and don't clean it with normal amino solution. After sticking the film, if there is fog between the film and the glass, it will naturally dry out and disappear within 2~3 weeks. After washing the car film, because the car wash towel usually has some fine sand, it will destroy the film surface after wiping, so try not to wipe the glass with the car wash towel, but prepare a soft towel to wipe it yourself.

Prevent self-explosion and wash the car carefully.