What are the operating procedures for driving safety technology?

1. Wear the required labor protection supplies, firmly establish the idea of ????"safety first", insist on inspections, emotional barriers, and ensure smooth operation of the vehicle.

2. Before starting work, the crane operator must carefully check the spreaders and ropes used for driving. Suspected spreaders and ropes are not allowed to be used until they are clear.

3. Non-driving operators are strictly prohibited from driving indiscriminately. Operators' vision, hearing, heart, blood pressure, etc. must be normal. Operators must study, train, and be familiar with driving performance and obtain a qualification certificate before they can operate.

4. Driving operators must supervise their posts and are not allowed to leave their jobs at will. They must concentrate during operations, operate carefully, listen to signals clearly, and pay attention to lookout to ensure that the driving is stable, the crane is stable, and the crane is stable. Put it down without damaging various workpieces and equipment. Smoking at work is strictly prohibited.

5. The safety door must be closed quickly and the latch must be plugged in before the vehicle can be driven.

6. The safety protection devices on the driving vehicle such as buffers and limit switches must be flexible and reliable. When any problem is found while driving, the vehicle should be opened immediately. During the driving process, the hanging objects should not fall to the ground. During this time, a fence must be set up under the hanging objects to prohibit people from entering.

7. When walking with hanging objects, the bell should be sounded first. Its height should not exceed 1 meter. It is not allowed to pass over people or equipment. It is not allowed to use a crane to hoist workpieces for processing. Improper use of the crane will be punished. Operators should always refuse to lift.

8. Heavy objects are not allowed to stay in the air for a long time after being hoisted. If there are special needs, effective security measures must be taken.

9. When all parts of the train are in operation, it is not allowed to reverse the train before it has stopped. When the train reaches both ends of the track, it must not be driven too hard to avoid an over-the-rail accident, and the trolley and lift will not work properly. should be started at the same time.

10. All braking devices while driving must be in good condition and reliable to ensure that hanging objects will not fall to the ground in the event of a power outage or outage.

11. Each limiter during driving must be flexible and reliable. Unlimited limiters or those that have failed are not allowed to be used to avoid accidents.

12. When the vehicle is undergoing maintenance, the power supply must be disconnected, and all personnel on and off the vehicle must be contacted. Only with the permission of all personnel can power be supplied and the vehicle tested.

13. Stop the main power supply after lifting. Clean up.

14. Regularly refuel and inspect all parts of the vehicle.

15. In case of any of the following circumstances, we have the right to refuse lifting.

(1) Overload of hanging objects.

(2) Unclear signals and random command.

(3) There are people on or inside the hanging objects.

(4) The hanging objects are tied up and the hanging is not strong, and the safety factor of the rope is less than 3 times.

(5) The lifted objects are connected to other weapons or buried underground.

(6) Inclined crane, cable-stayed,

For more information on the writing and production of engineering/service/purchasing tender documents to improve the bid winning rate, you can click on the official website customer service at the bottom for free consultation ：/#/?source=bdzd