Safety production self-inspection and self-correction rectification report

Safety production self-inspection and self-correction rectification report

The report of self-inspection and self-correction of production safety is very important for the production process safety of all enterprises, which is related to the personal safety of our employees and product quality. Once the dangerous consequences are unimaginable, the following is a sample of self-inspection and self-correction report on safety production.

Safety production self-inspection and self-correction rectification report 1 1. Manager Jiang of the project department first organized the personnel of the project department to conduct comprehensive self-examination, self-examination, rectification, implementation, re-inspection and re-rectification in combination with the resident office according to the spirit of the Notice on Launching the Hundred Days Special Action for Safety in Production issued by the Director Office.

Second, the overall inspection situation is as follows:

1. Existing machinery, such as road rollers, graders, bulldozers, excavators, etc. The construction site is running normally, the construction site is fully staffed, and there is no potential safety hazard on the construction site.

2. There is no potential safety hazard in the use of fire, electricity and gas in the construction site, office area and living area. At the same time, explain the precautions of using fire, electricity and gas to the responsible personnel of the construction team.

3. The roadbed and bridge construction site are safe in production, and the transport vehicles, domestic vehicles and foreign vehicles meet the safety regulations.

4. Wear complete safety labor protection articles. All traffic guide signs and signs are fully equipped and installed in place.

5. All personnel on duty in the project have been put in place.

6. The communication network is clear.

7, the number of fire fighting equipment is complete and in good condition.

8. The management of cooks, the safety of drinking water in the canteen and the safety of water are all normal.

9, the construction site and vehicles, materials stacking area are set up security personnel.

Three, safe production is from the beginning of each structure construction, the safe driving of subgrade transport vehicles and the overall safety of the project. Self-inspection is to start with safety, start with everyone's every move, word and deed, ideology, compare their own behavior, unit operation, team building whether it meets the requirements of the specification, compare the plan item by item, and implement the safety rules to the letter. Self-inspection is to check whether the implemented safety items are in place, whether there are omissions and improvements, and nip in the bud. Through this self-examination and self-correction, the safety awareness of employees has been strengthened, and an atmosphere of "everyone pays attention to safety and always pays attention to safety" has been formed in the construction process. With the attitude of being responsible for employees, individuals and families, the benefits have been maximized under the premise of safety. For the hidden dangers found in the inspection, the relevant units shall be ordered to rectify within a time limit to ensure that the construction conditions and facilities meet the requirements of safe production before returning to work.

Safety production self-examination and self-correction rectification report 2 According to the spiritual requirements and actual situation of the district health system safety production work conference, our hospital held a meeting in time, carefully deployed all the work, and carried out a safety medical inspection within the hospital. The self-inspection situation is summarized as follows:

I. Organization and mobilization

Dean held a meeting of competent leaders and departments to inspect key departments and posts in the hospital, and the competent leaders personally went to their posts to conduct on-site inspections, educating the staff of the whole hospital to do a good job in safety, avoiding accidents and eliminating hidden dangers affecting medical safety.

Second, check the content.

The hospital safety production leading group conducted a thorough inspection of the whole hospital, including the formulation and implementation of various safety production rules and regulations. Electricity consumption and fire fighting, inflammable and explosive dangerous goods management, medical safety management, etc. , as follows:

(1) Organization and leadership

The implementation of the leadership responsibility system is in good condition, and a safety production leading group composed of President Xu, Vice President and Department Director has been set up, with the personnel on duty in place and sound rules and regulations.

Prevention of medical accidents

The core system of medical safety has been implemented and rescue measures for critically ill patients have been put in place. Medical safety hardware facilities are perfect, and the facilities of supply room, operating room and other departments are standardized. Medical waste treatment rules and regulations are sound, and the treatment methods meet the standards, so that it is managed by special personnel and the responsibility lies with people.

(3) Fire fighting

The emergency plan was established, the fire duty and fire drill system was improved, and the personnel and funds were put in place. The protection and monitoring measures of key departments are strict.

Third, self-examination found potential safety hazards.

1, some electrical lines are aging, some departments supply power privately, and some switches are damaged, which has hidden dangers.

2, the fire infrastructure construction is not perfect, the number of fire fighting equipment is not enough.

Fourth, the rectification measures

Through this self-inspection and rectification of safety production, our hospital found the weak links of safety production in our hospital, and we will take excellent measures to actively rectify and eliminate all kinds of safety accidents. The found safety hazards should be rectified in place within this week, when the leading group for safety production will conduct on-site inspection, and those who fail to rectify or fail to rectify within the time limit will be seriously investigated for responsibility.

Safety production self-inspection and self-correction rectification report 3 1 copy. Strengthen leadership and implement responsibilities.

In order to conscientiously implement the spirit of the higher-level documents, our bureau has strengthened leadership, strengthened measures, and paid close attention to implementation, taking this major inspection as an important task of safety production. In charge of the leadership responsibility, has been to the bureau of the secondary units and departments to supervise and inspect, requiring all units to attach great importance to, with a highly responsible attitude to do a good job in production safety.

Second, the inspection and rectification synchronization

Combined with the work requirements of the higher authorities, our bureau dispatched a special person to set up a working group to carry out safety inspections in the secondary units and stock rooms of the bureau, and insisted on rectification while inspecting to promote rectification. If problems and hidden dangers are found in the inspection, a special person shall be appointed to be responsible and effective measures shall be taken. If it can be rectified on the spot, it must be rectified on the spot to eliminate hidden dangers in time. For example, there are many books stored in the library, and the place is relatively closed, which has certain security risks. During the rectification, our bureau further improved the relevant fire-fighting equipment, added fire-fighting equipment, and solved the existing security risks.

Third, increase publicity and create an atmosphere.

Our bureau took this safety inspection as an opportunity to vigorously promote safety production. Through publicity columns, electronic screens, banners and other forms, the public's understanding of safety production laws and regulations and safety knowledge has been strengthened, and a social atmosphere of "caring for life and paying attention to safety" has been created.

Four, strengthen the duty and information submitted.

During the inspection and rectification, our bureau shall, according to the actual situation, implement the specific personnel on duty, and clarify the responsibilities of the personnel on duty, keep abreast of the safety production trends in the bureau, ensure the smooth flow of information channels, report all kinds of unexpected accidents and abnormal situations immediately, and at the same time, notify the bureau office in time to cooperate according to the accident location, and strive to control the losses caused by the accident to a minimum.

Verb (abbreviation for verb) Next work plan

Through this safety inspection, many hidden dangers and problems have indeed been discovered. In the future work, we should further establish and improve the safety production system. Always pay unremitting attention to safety in production, increase publicity and education, and strengthen supervision and inspection of safety in production. No safety accidents were found throughout the year. In the future work, our bureau will further implement the spirit of instructions on work safety at all levels, clarify responsibilities, intensify work, carry out work safety in an all-round and solid way, make unremitting efforts, grasp characteristics and achieve results.