Clean solar slogan?

Wash away the lead, revitalize the copy, wash it healthier, and fill your life with cleanliness.

Solar energy utilization method

1. One of the two solar water valves is used for cold water and the other is used for hot water. If you can't tell who they are, you can just turn them off and turn on the tap that can put hot water into the hot water side. Try two solar water valves again, and open them separately to see which hot water faucet starts to produce water when it is opened. This water valve is hot water and the other is cold water.

2. If the two water valves are opened separately and the hot water faucet does not produce water, check whether there is a water valve in front of the hot water faucet, and open it if there is one. If there is still no water in the solar energy, you can open two solar water valves at the same time. At this time, there should be water coming out of the hot water faucet. Try to close a water valve. If the hot water tap doesn't come out at this time, this water valve is used to connect hot water.

3. After distinguishing the cooling and heating functions of the two solar water valves, open the cold water inlet valve after each water use to inject water for solar energy, and close the cold water inlet valve when water overflows from the solar energy (it only takes 20 minutes without automatic water supply equipment). The hot water valve can be kept open, or it can be opened before each water use, and then the hot water faucet can be turned on.

You give me dust, and I'll help you clean it up.

Solar energy, solar energy, be the cleanest messenger of transformation, and be the cutting-edge pioneer of science and technology!