Joke Collection Website - Bulletin headlines - What do you need to bring for vehicle inspection?

What do you need to bring for vehicle inspection?

What do I need to bring for vehicle inspection?

1. Driving license. 2. Original copy of compulsory traffic insurance. 3. Original ID card of the owner or agent. 4. Warning triangle, fire extinguisher 5. Sufficient RMB. 6. Car.

Vehicle inspection process

1. Confirm whether there are any violation records and whether compulsory traffic insurance and vehicle and vessel tax have been paid. If so, quickly go to the traffic police detachment where you settled to pay the fines and related taxes

2. Preparation work. The car body is washed, and all the personalized logos and slogans that I put on are cleaned. Check warning tripods, fire extinguishers, seat belts, etc., and repair any defects first.

3. Place orders and pay fees. Drive the car to the inspection center and swipe the vehicle identification card. The staff will print out a list for you. Take the printed list to pay the fee and get it stamped.

4. The vehicle inspection begins. First, the appearance of the car body will be checked, then the exhaust emission test will be carried out. After passing the test, the braking system, lights, chassis, etc. will be checked. After you are all qualified, you will be issued an environmental certificate and a qualified form. Take the qualified form and a copy of the compulsory traffic insurance to the traffic police detachment to have it stamped and get the annual inspection certificate. Precautions for annual inspection of new cars

Notes on the vehicle inspection process 1 : Car body stickers

In order to express their personality and beautify their cars, many car owners are accustomed to putting some personalized stickers or car club logos on the car body. There has been a saying on the Internet that if the area of ??the car body sticker does not exceed 30% of the total car body area, it will not affect the normal vehicle inspection. Here we can tell you in person based on relevant regulations and personal experience that any car sticker or logo, no matter how small it is, is not allowed to pass the vehicle inspection. However, there are exceptions, such as "internship" labels, etc., which have been filed and approved by the public security organs. Legal car stickers are allowed. If you bought a new car, don't put your favorite sticker on it immediately. You need to put it on after the registration is completed.

Note 2 on the car inspection process: Whether the insurance has expired

Car inspection requires the original insurance. I believe everyone is familiar with this. For most car owners, the time of car inspection is It is the same time as the insurance expiration. What needs to be noted here is that many friends have extended the insurance for a new year before the insurance expires. The old insurance may not have expired when the car is inspected, and the new insurance has not yet taken effect. At this time, you must Bring the original policy that is still valid, that is, the old policy, to the vehicle inspection, otherwise the ineffective insurance will not pass the inspection. Of course, these are only for compulsory traffic insurance. Compulsory traffic insurance is necessary for vehicle inspection, and commercial insurance is not required for the time being. When registering a new car, you must purchase compulsory traffic insurance!

Note 3 during the vehicle inspection process: Tire size changes

Under normal circumstances, a vehicle will need to replace tires after driving about 70,000 kilometers. At this time, many car owners They will replace tires of different brands or with more targeted functions to improve their different driving needs. This situation is relatively common among SUV owners. However, it should be noted that the tires replaced must be exactly the same size and model as the original car. Otherwise, even if the wheel hub style remains unchanged or the model changes, it will not pass the vehicle inspection. Our bus Haval once encountered such a thing. Due to negligence when replacing the tires, the tire width was different from the original car, and the other parameters were completely consistent. However, Failed vehicle inspection.

Note 4 during the vehicle inspection process: Whether the violations have been dealt with

Many friends will prepare the required materials before inspecting the vehicle again. At this time, the energy is focused on the vehicle identity information. Unaddressed violations are often overlooked. According to regulations, if the violation is not cleared in time, although it can pass the inspection of appearance, exhaust gas, etc., the final "inspection" label cannot be collected until the violation is resolved.

Note 5 during the vehicle inspection process: The car body is too dirty

Nowadays, everyone is very busy, and vehicle inspections are often carried out in time. Individual car owners may not notice that their vehicles are very dirty. Dirty, even if they realize that their car is dirty, they will not care too much. They think that as long as the procedures are complete and the vehicle is inspected, it will not be a problem. This is not the case. Vehicles that are too dirty will have an impact on the inspection of the appearance and chassis parts, and vehicle inspection requires photos. Therefore, if the vehicle is too dirty, the inspector will not take photos, so it will not pass the appearance inspection. This also applies to vehicles that are too dirty. New car license plates.

Note 6 on the car inspection process: Triangular window film

Filming is the first task for many car owners after buying a new car. According to regulations, glass film does not affect the car inspection, but before applying it, Film cannot be applied to the corners of the triangular windows of the row of windows. Good light transmittance needs to be left here to facilitate the driver's observation of the rearview mirrors on both sides. Therefore, once the film is applied here, it will not pass the vehicle inspection. If the vehicle does not have a triangular window, sufficient area must be reserved when attaching the mold. The film needs to be applied after the new car is registered.

Note 7 in the vehicle inspection process: Appearance does not match the photo

Appearance modifications cannot pass the vehicle inspection. I believe many people know that, but some practical configurations are lightly added, such as SUV modifications. Bumpers, luggage racks and other parts that we think are better for safety or driving aspects cannot pass the vehicle inspection. In addition, there are many models that have the effect of replacing the real ones with the fake ones by changing the logo. For example, BYD changed the Toyota logo, but it will not pass the vehicle inspection. To put it simply, as long as it does not match the driving photos, it will be regarded as cosmetic modification.

Another thing to note here is that if the body markings on your car have fallen off, don’t worry about failing the vehicle inspection, because the relevant regulations clearly indicate that natural falling off of body markings will not affect the vehicle inspection, but Just don't add a logo.

Note 8 during the vehicle inspection process: There is damage to the appearance

Small scratches and scratches are inevitable in daily use of the car. Many car owners simply do not repair minor injuries due to various reasons. In most cases, these It does not affect the vehicle inspection, but some serious scars may make it more difficult to pass the appearance. It is recommended that obvious scars be repaired in time before the vehicle is inspected.