Joke Collection Website - Bulletin headlines - How is the crane lease contract signed?
How is the crane lease contract signed?
In the crane lease contract, we should pay attention to the following aspects: first, the identity of both parties; Secondly, clarify the specific content of the contract; Third, clarify the liability of both parties for breach of contract; Fourth, specify the specific time.
Formal crane lease contract template 1
Lessee (Party A): _ _ _ _
Lessor (Party B): _ _ _ _
Party A rents Party B's crane for construction here. In order to clarify the responsibilities and obligations of both parties, this contract is hereby concluded through friendly negotiation for compliance and execution.
1. Type and quantity of cranes: _ _ _ _ _; Construction site: _ _ _ _ _ _; Construction content: _ _ _ _ _ _; Service time: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2. Rent and payment method:
Rent: _ _ _ _ _; Total contract price: _ _ _ _ Yuan only.
1, the unit price of one ton crane workbench is _ _ _ _ _ yuan/machine-team, and the unit price of idle machine-team is _ _ _ _ _ _ yuan/machine-team;
2. Bring a desk shift every day;
3. Each shift is 8 hours, subject to the driver's entry and exit time. Excess rent = accumulated excess working hours /8 hours × shift fee. (subject to the construction record)
4. The entry and exit expenses of the crane shall be paid by the crane team through negotiation ×2= team.
5. For the lifting equipment with a value exceeding _ _ _ _ _ _ _, the unit price of the crane unit is _ _ _ _ _ _.
6. Payment method: pay in one lump sum after signing the contract, or pay RMB _ _ _ _ _ _ _ in advance when Party B's crane arrives at the site, and settle the balance before the crane leaves the site.
Third, the safety responsibility:
1, should be in strict accordance with the safety technical operation procedures. Both parties have the right to stop the other party's illegal operation and illegal command, and adhere to the principle of _ _ _ _ _. Party A shall be equipped with qualified lifting commanders and be responsible for site safety management.
2. Party A shall be responsible for the accidents caused by unclear declaration of the above-ground and underground facilities on the construction site.
3. Before hoisting, be responsible for the disclosure to the crane driver of Party B. It is forbidden to do any project beyond the operation plan, and assign a special person to direct the operation. Both parties should unify signals to ensure operation. In case of brutal operation during construction, the crane driver of Party B has the right to refuse the operation. Party A shall be responsible for the responsibilities and losses caused by command errors or failure to implement safety measures.
4. In case of safety accidents during construction, the principle of responsibility division is: Party B shall be responsible for the mechanical equipment above the hook of the crane; Below the hook (wire rope, lifting lug, shackle, binding, command, etc.). ) Party A shall be responsible for it. ..
Four. Rights and obligations of Party A
1. In this project, there must be _ _ _ _ _ _ teams. If the actual number of machine shifts exceeds _ _ _ _ _ _, the settlement will be made according to the actual situation.
2. Have the right to use the leased crane during the lease period, but have no ownership. Party B shall not transfer, sublet, sell or mortgage Party B's equipment, move the workplace without authorization, or operate Party B's crane by itself. In case of accidents or losses, Party B shall bear all responsibilities.
3. Pay the rent on time. In case of late payment of compensation (compensation = contract amount × 0,5%/day), it shall be liable for breach of contract.
4. When the crane is parked at the construction site, Party A shall be responsible for the custody. If it is damaged due to improper storage, Party A shall be responsible for its losses.
5. All bad behaviors that intentionally damage or hurt Party B's operators and equipment must be eliminated.
6. Rigging (with qualified operation certificate), steel wire rope and sleeper shall be provided by Party A. ..
7. Party A shall provide accommodation for the crew free of charge.
Verb (abbreviation of verb) Rights and obligations of Party B.
1, crane operators must obey the command of the person in charge of the site and abide by the relevant rules and regulations.
2. The equipment provided by Party B must ensure normal operation. In case of equipment failure, Party B shall immediately organize emergency repair or replacement of other equipment.
3. The hydraulic oil and lubricating oil required by the crane shall be provided by Party B. ..
4. If the rent is not paid on time, Party B has the right to terminate the crane lease at any time.
5. When loading and unloading the crane, Party B shall send someone to give guidance.
6500t, 200t,130t and 80t crane leg pads shall be provided by Party B. ..
7. Party B shall provide Party A with a crane performance table.
Settlement method of intransitive verbs
Seven. This contract is made in duplicate, one for each party. It will take effect after being signed by both parties.
Party A (seal): _ _ _ _
Representative (signature): _ _ _ _
Party B (Seal): _ _ _ _
Representative (signature): _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Formal crane lease contract template 2
Lessee (Party A): Lessor (Party B):
Through consultation, Party A and Party B sign the following contract for Party A's lease of equipment to Party B for compliance.
I. Name, specification and model of the leased equipment
Equipment name: truck crane specification model: sym 5330 jqz(STC 250h) Number of sets: one set of factory date: March 7th, 20_.
Second, the equipment use location, project name and equipment entry time
Location of use of leased equipment: construction site; Project name: all construction sites of the company; Equipment entry time: on call, not fixed.
Third, the lease term:
According to Party A's needs, it can be used at any time, with no fixed term.
Four, rental fee standards and settlement methods
1. The crane rent is calculated on a monthly basis, and the monthly rent is RMB/month (including tax). Less than a month, according to the actual number of days /30 days multiplied by 60 thousand yuan. The minimum monthly subscription period is one month.
Verb (abbreviation of verb) lease-related fee agreement
2. The equipment lease time is calculated from the date when the equipment comes into play and is officially used.
3. The fuel cost of the crane and the accommodation cost of Party B's operators shall be borne by Party B. ..
4. Party A shall provide drivers and rigging for the equipment.
5. The equipment shall be settled on a monthly basis, and the bill of that month shall be signed by the person in charge of Party A's site. If the actual production time is less than one month, it shall be counted as machine-team. In addition, Party A shall settle all the rents of Party B within five days after the completion of the project.
The responsibility of party a with intransitive verbs
1. Party B's driver shall not be forced to work in violation of the equipment safety operation regulations to ensure the normal maintenance time of the equipment.
2. Without Party B's consent, Party B's equipment shall not be subletted, mortgaged or sold, and any parts shall not be added or removed or the construction site shall not be changed.
Seven. Party B's responsibilities
1. Ensure that the equipment is in good technical condition, ensure the normal operation of the equipment, and ensure that the equipment can be put into normal use during the lease period. The vehicle maintenance cycle is two days per month, and the maintenance time can respect the opinions of Party A.. Party B shall reasonably arrange the maintenance time without affecting Party A's on-site construction progress.
2. The driver of Party B shall operate with certificates according to the equipment operation regulations, obey the dispatch and command of Party A's construction management personnel, and ensure to abide by laws and regulations and Party A's construction site rules and regulations.
3. Working hours: Party B's driver shall fully abide by the working hours of Party A's workers, and in principle, the daily working hours are 65,438+00 hours. If the schedule requires, Party B shall meet Party A's overtime demand.
4. The driver of Party B shall obey the arrangement of Party A's on-site management personnel. Party A has the right to ask Party B to replace the driver who is not fully cooperative, and Party B shall dispatch and select a suitable driver as soon as possible so as not to affect the progress.
Eight. others
Matters not covered in this contract shall be settled by both parties through consultation.
Nine. supplementary terms
This contract is made in duplicate, one for each party, and shall come into effect after both parties sign (seal).
Party A (official seal): _ _ _ _ Party B (official seal): _ _ _ _
Legal representative (signature): _ _ _ _ Legal representative (signature): _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Formal crane lease contract template 3
Lessee: (Party A) Lessor: (Party B)
Party A needs to use Party B's truck crane for production needs. In accordance with the provisions of the Contract Law of People's Republic of China (PRC), both parties hereby enter into this Contract through equal consultation for mutual compliance.
Article 1 Lease content
1, model:
2. Lease term: monthly rent, with a term of
3. Scope of work:
4. Lease price: fixed part/month of truck crane, the vehicle refueling is responsible, and Party B's accommodation is responsible.
Article 2 Method of settlement
Settle by cash or check, and pay the rent every month.
Article 3 Safety responsibilities
1. Carry out the construction in strict accordance with the Code for Safe Operation. Both parties have the right to prevent the other party from violating the rules, and Party A shall be responsible for safety management.
2. Party A shall be responsible for the accidents and losses caused by Party A's failure to clearly declare the weight of the above-ground and underground facilities and equipment on the construction site.
3. For accidents caused by Party B's operational mistakes, Party B shall bear the responsibilities and losses.
4. For accidents caused by Party A's command error or failure to implement safety measures, Party A shall bear the responsibilities and losses.
Article 4 Rights and obligations of Party A and Party B
(1) Party A
1. During the lease period, Party A only has the right to use the leased equipment, but has no ownership. Party A has the right to command and allocate the leased equipment according to the production needs within the scope of the contract, but shall not transfer, sublet, sell or mortgage Party B's equipment, transfer it to the job site outside the contract without authorization, or operate Party B's equipment by itself. In case of accidents or losses, Party A shall bear all the responsibilities.
2. When the crane stops at Party A's construction site, Party A shall be responsible for the safety work, and any losses caused thereby shall be borne by Party A..
(ii) Party B
1. The driver of Party B must obey the command and deployment of Party A's leadership and abide by Party A's relevant rules and regulations.
2. The crane provided by Party B must operate normally. In case of special circumstances, Party A shall provide Party B with 3 days for vehicle repair and maintenance. If the equipment fails, Party B shall repair it in time.
Article 5 Other matters
Article 6 Method of dispute settlement
If there is any dispute in the performance of the contract, both parties shall settle it through consultation. If negotiation fails, either party may bring a lawsuit to the people's court for settlement.
Article 7 Effectiveness and Termination of the Contract
This contract is made in duplicate, one for each party, and shall come into effect as of the date of signature and seal by both parties.
This contract shall be terminated after Party A and Party B fulfill all the obligations agreed in this contract and pay the settlement price for completion.
Party A (official seal): _ _ _ _ Party B (official seal): _ _ _ _
Legal representative (signature): _ _ _ _ Legal representative (signature): _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Formal crane lease contract template 4
Lessee: _ _ _ _ (hereinafter referred to as Party A)
Lessor: _ _ _ _ (hereinafter referred to as Party B)
According to the negotiation between both parties, it is agreed to rent a crane to cooperate with Party A in hoisting. Details are as follows:
1. Name and quantity of construction machinery: _ _ _ _ mechanical equipment: _ _ _ _ mechanical equipment (equipment).
Two. Construction content and location: _ _ _ _ _
Three. The lease term is tentatively set as: _ _ _ _ _ _ _ year (inclusive) month (inclusive) day (inclusive).
Fourth, financial settlement.
1. charging standard: _ _ _ _ _ yuan/machine-team, at least one shift is guaranteed every day, and the overtime time is half a shift within four hours and one shift within eight hours according to national standards.
2. Entry and exit fees: RMB _ _ _ _ _
3. Strictly implement the task list signing system, and Party A shall sign the task list carefully every day according to the contract. Name of signatory
4. Payment method: Party A pays RMB Yuan only.
Party A must pay within the time limit required by Party B.. If the payment is overdue, Party B shall charge a penalty of 2‰ of the total cost every day, and have the right to stop hoisting or terminate the contract, and all losses caused thereby shall be borne by Party A. ..
Five, strictly implement the safety operation procedures, not illegal operation, it is forbidden to overload lifting. After Party B enters the site mechanically, Party A is responsible for the safety of the crane after work every day to avoid mechanical accidents. If Party B's machinery is damaged or lost due to Party A's reasons, Party A shall be responsible for compensation.
6. In the process of hoisting, Party A must assign a rigger with hoisting command qualification certificate to conduct the command, and do a good job of safety technical disclosure before the construction, unify the command signals, and ensure the construction safety. Party A shall be responsible for the losses caused by Party A's mistake in hoisting command. Adhere to the "ten don't hang", that is:
1, do not lift when the rated load is exceeded.
2. The command signal is unknown and the weight is unknown.
3. The slings and accessories are not tied firmly, and shall not be hoisted when they do not meet the safety requirements.
4, crane lifting heavy objects without hanging directly for processing.
5, hanging askew, hanging obliquely.
6. Someone is standing on the workpiece or there are live animals floating on the workpiece.
7, oxygen cylinder, acetylene generator and other dangerous goods without safety measures.
8. Objects with edges and edges are not padded (to prevent the wire rope from being worn off).
9, buried objects don't pull out, don't hang.
10, lifting is not allowed when the lifting commander commands.
Seven, Party B's crew should strengthen the inspection and maintenance of machinery, so that the machinery is in good working condition. Party B's crew shall actively cooperate with Party A's work, and shall obey the command of Party A's commander unless it cannot be lifted without violating the safety operation regulations. Principle of responsibility division: Party B shall bear the responsibility for accidents above the hook; Party A shall be responsible for the following accidents.
Eight. When Party B's personnel enter Party A's construction site, they must abide by the rules and regulations of Party A's construction site and obey Party A's working hours and work arrangements ... If Party B's crew deliberately slacks off, Party A has the right to request the replacement of crane drivers with higher quality if there are sufficient supporting materials.
Nine. Party A is responsible for the site conditions, hoisting conditions and lifting tools at the construction site. If night construction is required, Party A must do a good job of adequate lighting. After Party B enters the site mechanically, if it cannot be hoisted due to the above problems, Party A shall be responsible for the losses caused thereby.
X. If Party B's machinery fails during the construction cooperation, Party B shall actively organize personnel to carry out maintenance. If Party A rents the vehicle on a monthly basis, it needs two days to repair and maintain the vehicle every month, and the rental fee shall not be deducted. If the maintenance time exceeds two days, the rent will be deducted according to the actual overtime, and Party B will not bear the corresponding compensation liability.
XI。 Others:
1. Party A is responsible for the accommodation, food and other living problems of Party B's crew during Party A's construction.
2. Party A shall be responsible for the fuel materials used by Party B during the construction period.
3. Party A shall be responsible for the tolls incurred by Party B's machinery during driving.
4. Party A shall be responsible for the over-limit certificate of large vehicles required by Party B's machinery during driving.
12. This contract shall come into effect after being signed and sealed by both parties, and shall automatically become invalid after the price is fully settled. If there are any outstanding matters, both parties shall settle them through consultation. This contract is made in quadruplicate, one for each party.
Party A (signature): _ _ _ _ Party B (signature): _ _ _ _
Agent (signature): _ _ _ _ Representative (signature): _ _ _ _
Date of signature: _ _ _ _ _ _ _ (month) (day)
Formal crane lease contract template 5
Lessor: (hereinafter referred to as Party A)
Lessee: (hereinafter referred to as Party B)
According to the relevant provisions of the Contract Law of People's Republic of China (PRC), the lessor and the lessee have reached the following terms on the lease of truck cranes through consultation for their compliance.
I. Project Name and Scope of Use:
The Lessee rents 80T and 160T truck cranes from the Lessor due to work needs, which are suitable for hoisting the expansion equipment of Yitong Mining Co., Ltd., and consigns 40T flat car counterweight free of charge to serve the 160T truck crane.
Second, the use period:
When the 80T, 160T truck crane and 40T flatbed car need to be rented again after their service life expires, the lessee shall notify the lessor 1 day in advance, and the renewal fee shall be implemented according to this agreement without adjustment.
Three. Rent and settlement method:
1, rent: 80T truck crane rent 400 yuan/machine-team, 160T steam crane rent 1500O, 40T flatbed car does not calculate the cost, but pulls the counterweight for 160T crane.
2. The daily working hours shall not be less than 10 hour;
3. Payment method: 80T and 160T truck cranes complete the hoisting task, and the expenses incurred shall be paid in one lump sum.
The above expenses include labor cost and equipment cost.
Four. Working hours and contents:
The daily working hours are calculated according to the working hours of the lessee, and the net working hours are 65,438+00 hours. During this period, all materials and transshipment that meet the lifting requirements of the lessee are within the lifting range of 80T and 160T truck cranes, and the equipment is hoisted and transported.
Verb (abbreviation for verb) Equipment maintenance:
The lessor is responsible for the maintenance, routine maintenance and maintenance of 80T, 160T truck cranes and 40T flatbed cars to ensure the safety and normal use of the equipment, and the expenses shall be borne by the lessor. The lessor shall be responsible for fixing the main wire rope, various supporting wire ropes and sleepers used for hanging objects on the crane.
The rights and obligations of lessors with intransitive verbs;
1. The exporter has the right to require the lessee to ensure the safety of cranes, operators and equipment during lifting.
2. The lessor has the right to refuse the lessee's request for overweight and illegal operation, lifting articles and transferring goods.
3. The lessor shall obey the work arrangement of the lessee, and obey the arrangement when overtime is needed according to the management system of the lessee's commuting.
4, when there is a standby work arrangement, the operator should be on standby at any time, randomly obey the deployment.
5. The lessor is responsible for the daily maintenance of cranes and flatbed cars to ensure the safety of driving and operation.
Seven. Rights and obligations of the lessee:
1. The lessor shall abide by the use plan prepared by the lessee.
2. If the lessee does not obey the instructions of the lessor's operator, it has the right to propose replacement, and the lessor shall obey. The economic losses caused by the equipment failure and improper operation of the lessor shall be borne by the lessor.
3, 80T, 160T truck crane repair oil consumption and price fluctuation shall be borne by the lessor, and the refueling location shall be arranged by the lessor to provide refueling.
4. The operating personnel provided by the lessor must hold a valid special operation certificate. If the operator is changed midway, it shall report to Party A in advance and submit the valid special operation certificate of the changed operator.
VIII. Taxation and Insurance:
The lessor shall pay all kinds of taxes, 80T, 160T truck cranes and flatcars by itself.
Nine. Liability for breach of contract and dispute settlement:
1. Lessor's liability for breach of contract:
The 80T, 160T crane and 40T flatbed provided by the lessor, or leaving the construction site to be hoisted in other units without the consent of the lessee, is a breach of contract, and shall bear the liability for breach of contract, and the liquidated damages shall be calculated at one time at 10000 yuan.
2. The lessee's responsibilities:
After Party A's settlement and payment are in place, the lessee's funds shall be paid in time.
X. safe production:
The lessor shall, in accordance with the principle of "safety is for production, and production must be safe", do a good job in construction safety and civilized operation, strengthen safety technology management, accept the safety supervision and regular safety inspection of the contractor, and make rectification on time according to the inspection and rectification opinions of the lessee. During the lease term, the lessor will make rectification on time according to the inspection and rectification opinions of the lessee. During the lease period, the lessor shall be responsible for all quality and safety accidents caused by the machinery in white body and improper operation, and the lessee shall not bear any responsibility or support any expenses.
XI。 Supplementary terms:
1. The Lessor and the Lessee reach a supplementary clause through negotiation, which is a part of this Agreement.
2. If both parties can't reach an agreement, they can bring a lawsuit to the people's court and solve it through judicial procedures.
Twelve. Others:
1. If there are any matters not covered in this agreement, both parties shall make supplementary provisions through consultation, which have the same effect as this agreement.
2. This Agreement is made in duplicate, one for the lessor and one for the lessee.
Party A (official seal): _ _ _ _ Party B (official seal): _ _ _ _
Legal representative (signature): _ _ _ _ Legal representative (signature): _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Formal crane lease contract template 6
(hereinafter referred to as Party A)
(hereinafter referred to as Party B)
In order to install, disassemble and transport overweight machinery, Party A needs to use truck cranes and transport vehicles with corresponding qualifications rented by Zhuzhou Wanlilai Transport Co., Ltd. for hoisting. In accordance with the relevant provisions of the Contract Law and on the principle of equality and mutual benefit, the Contract is hereby signed by both parties through consultation:
A, lifting transport equipment model
1. Selection and cost of truck cranes
2. Selection and cost of transport trucks
Second, the mode of payment
After the two parties check that the shipping documents are consistent every month, Party B will issue an invoice to Party A's ordnance according to the total lease amount of the month, and Party A's finance will transfer the corresponding amount to Party B's account.
Three. Party A's responsibilities:
1. Arrange loading and unloading personnel with operation qualification certificates to cooperate with the installation and disassembly of the equipment.
2. Be responsible for providing necessary site conditions such as site and road lighting, ensuring smooth roads for truck cranes and transport trucks, flat hoisting sites and necessary hoisting space.
3. Operate in strict accordance with the operating procedures and refuse all illegal operations and instructions. If an accident is caused by Party A's illegal command, Party A shall bear the corresponding responsibilities.
Four. Party B's responsibilities:
1. Party B must provide [safe and qualified truck cranes and transport trucks for operation according to Party A's site conditions and time requirements.
2. Arrange excellent and qualified operation drivers and company commanders.
Ensure that the goods are not lost or damaged. If the goods are lost or damaged, Party B shall bear the corresponding liability for compensation.
4. The transport driver shall cooperate with Party A in loading and unloading.
5. The hoisting operation strictly abides by the principle of "ten no-hoisting". In case of accidents caused by Party B's illegal operation and illegal command, Party B shall bear corresponding responsibilities.
Verb (abbreviation of verb) Other unfinished business.
The two sides negotiated settlement.
Intransitive verbs this contract
In duplicate, each party holds one copy, which shall come into effect after being signed and sealed by both parties.
Party A (official seal): _ _ _ _ Party B (official seal): _ _ _ _
Legal representative (signature): _ _ _ _ Legal representative (signature): _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
The above is what Bian Xiao shared today, and I hope it will help you.
- Previous article:Who knows the slogans about protecting the Yellow River?
- Next article:How to design the dog cage effect at home
- Related articles
- In addition to exercising, what foods do you need to eat to build muscle?
- Write a publicity slogan about campus safety
- Banning betel nut slogan
- Heroes ask for help, ranking among the top 20 commercial real estate development enterprises in China!
- Chemical safety knowledge?
Chemistry is a natural science based on experiments. What do you know about chemical safety? The following is what I have compiled for your reference and understanding
- The living conditions of native Chinese Americans
- What is the function of intelligent trash can in garbage sorting operation?
- Is it illegal to hang banners?
- What is the price of Moutai Prince Liquor 53%?
- Wedding planning scheme [5]