The second process of driving license test

1. Sign in and wait for the test:

Candidates must hold their ID cards and arrive at the reserved test room 1 hour in advance, either organized by the driving school or individually, according to the scheduled date and test session. After arriving, designate the front desk or locker to store prohibited items such as mobile phones, keys, watches, etc. Pay the examination management fee, check the personal examination date and file with your ID card, and distribute the admission ticket and tag. Candidates brought their admission tickets and tags and queued up in an orderly manner to enter the waiting room.

Examination students must verify their identity (swipe their ID card) in order in the designated waiting area of ??the examination room, check their admission ticket, and pass the access security check. After success, they will enter the second waiting room for the subject according to the instructions of the staff.

After entering the waiting hall, candidates must verify their fingerprints (usually by pressing the fingerprint three times with the index finger and thumb of the right hand), scan their face, and wait patiently after receiving their sign-in number.

Be sure to abide by the rules of the examination room and do not make noise or move around at will. If you need to leave temporarily while waiting for the examination, you must apply to the staff for departure registration.

When waiting, the first thing to pay attention to is to check the candidate's name, ID number, car number, examination area, and other information displayed on the electronic display screen in the waiting room to see if you are there.

The second is that the sign-in number is the voucher for taking the test. During the test, please pay attention to whether the number called by the lobby broadcast is yours. The voice prompt for calling the number is "Please go to the number ***." "Car test"; in the examination room, only the number is called, but the name is not called.

When you are ready to take the test, the staff will conduct metal detector and electronic device detector verification. After the examiner conducts a simple inspection, you will go down the stairs and take the green channel for candidates to the waiting area of ??the examination room. Remember the test car number, and follow the displayed car number and area to find the car you are using for the test. If someone is taking the test in the car, please wait patiently in the test room. During the waiting time, you can familiarize yourself with the test process and the test room environment, and calm yourself down. If you are nervous, if there is no one around, just wait for the examiner to notify you and get on the bus (the examiner will briefly explain the test procedures and precautions before getting on the bus, so students must listen carefully).

2. Preparation for getting on the bus:

There is no limit on the starting time after getting on the bus. After getting on the bus, close the door first and pay attention to whether the door light goes out. Failure to close the door will result in failure. of.

Adjust the position of the seat to a comfortable sitting posture for better operation; use your left foot to depress the clutch to the end, hold the steering wheel with your right hand, and adjust the seat with your left hand until your left foot can be used When bending hard, you should also pay attention to moving forward and backward to test whether the seat is locked. Adjust the backrest to the usual practice position, and pay attention to test it front and back to see if it is stable. Then put your hand on your head to measure whether the height is the same as usual practice. If it is too low, you must put the seat cushion and adjust it.

Then adjust the left and right rearview mirrors to the appropriate position, so that you can clearly see the corner of the ground when reversing. The position of the rearview mirror can be adjusted to the way you usually practice driving. No need. It’s too confusing; after completion, the most important step is to wear a seat belt. Many students forget to wear a seat belt during the exam and fail the exam. This is really inappropriate.

After everything is ready, verify fingerprints and test information. After successful verification, the examiner clicks the "Start Test" touch button (on the display in front of the passenger seat). At this time, a voice is heard, "Start test, please start." ", and then the test will be conducted according to the voice prompts in the car.

Remember clearly the order of the test items. You must know that subject 2 contains many items, and they must be completed step by step in order.

Look at the reference points of each exam item and don’t look around blindly. Anyway, you must operate in order so that you won’t fail the exam easily.

Control your speed. Don’t rush during the test. You would rather drive slower than faster.

3. Start the test:

First depress the clutch, shift to 1st gear, turn on the left turn signal, press the horn, release the handbrake, then slowly release the clutch, and the car will move forward slowly. ,

During the exam, the general sequence is: reversing into the garage - side parking - fixed parking and starting on the slope - curve driving - right-angle turn.

At the beginning of each project, when the front of the car enters the induction area, there will be a voice prompt in the car. For example, when the voice in the car "Please reverse the car into the garage" sounds, it means that the official test of this item has begun. The first level Reverse the vehicle and put it into the warehouse. When the car reaches the examination area, the speaker in the car will remind you that "the reversing vehicle and the examination start". During the examination, no parking is allowed.

1. Reverse the vehicle into the warehouse:

Put the reverse gear into the warehouse, and after completing the right-hand and left-hand drive into the warehouse, you need to enter the next test from the right through the right induction line. After the car comes out of the right induction line, you will hear the voice announcement "This project is completed". You must not press corners or compact lines during the entire process (from the starting point), and you cannot press other reversing parking spaces. You should enter the next item from the return lane.

During the exam, if a certain step is not performed properly and causes points to be deducted, there will be a voice prompt. If it is passed, there will be no sound and you will go directly to the next item;

Attention when reversing into the warehouse Matters:

(1) When the car reaches the starting position, the distance between the body and the line should be pressed against the white line on the right front of the garage, but not beyond.

(2) When reversing, you should pay attention to the alignment point and hit the right direction. How you usually practice is still the same as the test now. Look at the alignment point in the rearview mirror.

(3) After entering the garage, the vehicle must be straightened and do not turn left or right.

(4) Be careful not to pour too much after entering the warehouse. Stop as soon as you enter the warehouse.

(5) Pay attention when leaving the warehouse on the left. Check the distance between the car body on the left and the warehouse line. size, adjust the steering wheel appropriately,

(6) When exiting the warehouse on the left, you must exit the warehouse to the specified position,

(7) Do not stop or roll away during the entire process. Can't shift gears, can't turn off the engine, can't shadow the line. (Part of the line cannot be crossed)

2. Right-angle turn:

When the front of the car is close to the guide arrow, it will announce "You have entered the right-angle turn test event". When the turn comes out, it will announce "This is the time". Project completed". When entering a right-angle turn area, the vehicle speed should be slow, and the right front wheel should be aligned with the triangle of the guide arrow on the road sign on the ground to drive over. And the left corner of the front of the car is close to the left line, or the gap in the nose cover presses on the left line and moves forward slowly. (To observe the front of the car) After adjusting the direction, swing your head to the right to see the point.

Notes on right-angle turns:

(1) When the car moves forward, the distance between the body and the right edge line must be adjusted,

(2) Wait until the car arrives When cornering, hit the steering wheel according to the speed of the vehicle.

(3) After being killed, you can stretch your head to see if the left rear wheel of your car can press the corner. If it can, you can turn the steering wheel appropriately.

(4) During the entire process, you cannot stop, roll away, shift gears, stall, or press the line

3. Parking and starting at fixed points on slopes:

For example, after completing the test with a right-angle turn and parking at a fixed point on a slope, you can press the half-clutch and slowly go up the slope, adjust the direction in advance and stabilize the direction of the car, align the front of the car with the slope uphill, and immediately turn on the left turn signal after parking at the fixed point. Complete the uphill start in thirty seconds. If you pass the grade when parking at a fixed point on an uphill slope, you will hear a "dang" sound. Don't turn off the engine when starting, don't slide back, don't rush forward.

After parking and starting on the slope, there will be a voice prompt in the car. If you pass the test, it will prompt "Passed the test, please go to the test center to print the results." If you fail the test, "Failed the test" will be prompted;

Precautions for parking and starting at fixed points:

(1) When driving uphill, turn right and do not drive too fast. Generally, it is appropriate for the right wheel of a car to be 30 centimeters from the edge line. Control this distance.

(2) When reaching the specified position, the vehicle speed should be slower, so that the point can be found more accurately.

(3) Before starting, turn left, sound the horn, and find the semi-linkage. Generally don't press the gas pedal.

(4) During the entire process, you cannot stop (except at fixed points), roll away, shift gears, stall, or press the line

4. Side parking:

p>

When you hear the voice: You have entered the side parking position, immediately stop the car and engage the reverse gear, complete the side parking, and there will be a "dang" sound after you have parked in the parking position. When moving the car, be sure to stop when the right angle point is exposed, and do not press the front line. When the left rear wheel is about ten centimeters closer to (or pressing against) the green paint edge line, turn left. Shift into first gear after parking! Ten points will be deducted for exiting the warehouse!

Notes on side parking:

(1) When the car drives to the test position, the body of the car must not exceed the white line, that is, The car body cannot press the white line.

(2) The distance between the car body and the edge of the garage should be adjusted, as well as the distance between the body and the garage. It should not be too close to the garage. At least the rear wheels of the car should exceed the edge line of the garage.

(3) Look at the alignment when turning.

(4) Turn left and sound the horn after entering the garage. When leaving the garage, the vehicle must not press against the corner of the garage.

(5) During the entire process, you cannot stop, roll away, shift gears, stall, or cross the line. (Some parts cannot cross the line)

5. Curve driving:

When you hear the computer voice announcement: You have entered the curve driving. At this time, enter the entrance of the curve and drive right. Make sure you are 30 to 50 centimeters away from the left curve or drive slowly and uniformly from the middle while making a 90-degree circle to the right at a uniform speed. When you reach the middle of the curve, return to the flat direction of the left circle, and then When entering the left curve and driving at a constant speed, make a 90-degree turn to the left, and then make a turn to the right when exiting.

After the curve is completed, the computer voice broadcasts "This project is completed". Park the car in the waiting area and wait for the voice broadcast, "The test results are passed and the results are being uploaded." You can get off the car only if you pass the test results. , don't be in a hurry to loosen your seat belt.

Notes on curve driving:

(1) The car must make a big turn after entering the curve.

(2) The speed of the vehicle should be controlled to be slow and it is best to move forward at a constant speed. Every corner must be pointed accurately, the direction must be turned fast, and the return turn must be fast.

(3) During the entire process, you cannot stop, roll away, shift gears, stall, or press the line

Notes:

1. The clothes should be comfortable. The editor recommends that candidates wear the same shoes they usually wear when practicing driving, so that it is easier to find the feeling.

2. When preparing to get on the bus, be sure to adjust your seat and fasten your seat belt before fingerprint verification.

3. Each test item in the examination room is detected by GPS positioning. The control line (yellow dotted line) of each item represents the test area of ??the item. As long as the front of the vehicle crosses the control line, it means that it has entered the test of this project, and it must complete the test according to the test rules of this project;

4. Before entering the next test project, confirm whether there are any vehicles If you are taking a test in front of the vehicle, if there is a vehicle taking the test in the project ahead, you must stop and wait in front of the yellow line of the project and are not allowed to enter.

5. There are two opportunities during the exam. It is required that five items must be passed in each opportunity. If one fails, all five items must be retaken.

6. If you fail the first chance exam, you will take the second exam. If you fail in the exam process, you will start again on the next project.

7. After the exam, candidates must leave the venue quickly and are not allowed to hinder or direct others to take the exam. They must leave the exam room through the exit, then bring their sign-in number to the score printing window to sign and print the score sheet.

Don’t ask about the test results. Everyone’s skills and mentality are different. Don’t talk about the quality of the test. Only by maintaining a good attitude, a good mood, and relaxing can we perform better. I wish in advance all the students taking the driving test subject two that they will pass in the first attempt.